[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Is there really nobody that can help me? (was Re: radeon 9200, Linux 2.6 and Xfree 4.3.0 dri not working)



On Sat, 2004-01-31 at 10:53, Alan Chandler wrote:
> ...
> I am getting the XFree log message saying AGP not available, yet the messages 
> in kern.log don't show any problem.  I am stuck - where do I look now for 
> this problem?
> ...
Just to say that I'm having the same problem, but with:

- Woody system.
- Xfree 4.3.0 (packages recently provided by Norbert Tretkowski,
 otherwise working fine).
- kernel 2.4.24
- Radeon 9200 SE (chip ID: 5964)


These are some related kernel messages:
...
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: Detected Via Apollo Pro KT400 chipset
agpgart: unable to determine aperture size.
...
[drm] Initialized radeon 1.7.0 20020828 on minor 0
[drm:radeon_unlock] *ERROR* Process 11592 using kernel context 0
[drm:radeon_ioremapfree:mappings] *ERROR* Attempt to free NULL pointer
[drm:radeon_ioremapfree:mappings] *ERROR* Excess frees: 1 frees, 0
allocs
...

And part of the XFree86 log file:
...
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x5964) rev 1,
Mem @ 0xe
8000000/27, 0xd7000000/16, I/O @ 0xd800/8, BIOS @ 0xe7fe0000/17
(--) PCI: (1:0:1) ATI Technologies Inc unknown chipset (0x5d44) rev 1,
Mem @ 0xd
...
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1)
found
(--) Chipset ATI Radeon 9200 5964 (AGP) found
...
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
0x0000
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 16, (--) framebuffer bpp 16
(II) RADEON(0): Pixel depth = 16 bits stored in 2 bytes (16 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(==) RADEON(0): RGB weight 565
(II) RADEON(0): Using 6 bits per RGB (8 bit DAC)
...
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon 9200 5964 (AGP)" (ChipID = 0x5964)
(--) RADEON(0): Linear framebuffer at 0xe8000000
(--) RADEON(0): MMIO registers at 0xd7000000
(--) RADEON(0): BIOS at 0xe7fe0000
(--) RADEON(0): VideoRAM: 131072 kByte (64-bit DDR SDRAM)
...
(==) RADEON(0): Write-combining range (0xe8000000,0x8000000)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) RADEON(0): [drm] created "radeon" driver at busid "PCI:1:0:0"
(II) RADEON(0): [drm] added 8192 byte SAREA at 0xf88f3000
(II) RADEON(0): [drm] mapped SAREA 0xf88f3000 to 0x40014000
(II) RADEON(0): [drm] framebuffer handle = 0xe8000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(WW) RADEON(0): [agp] AGP not available
(II) RADEON(0): [drm] removed 1 reserved context for kernel
(II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xf88f3000 at
0x40014000
(II) RADEON(0): Memory manager initialized to (0,0) (2048,8191)
(II) RADEON(0): Reserved area from (0,1536) to (2048,1538)
(II) RADEON(0): Largest offscreen area available: 2048 x 6653
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
...
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): Backing store disabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 1538)
(II) RADEON(0): Largest offscreen area available: 2048 x 6649
(II) RADEON(0): Direct rendering disabled
(==) RandR enabled
...



-- 
                                                     O__
Enzo.                                                ,>/
____________________________________________________()_\()____
Enzo A. Dari  |  Instituto Balseiro / Centro Atomico Bariloche
Web page: http://cabmec1.cnea.gov.ar/darie/darie.html



Reply to: