siliconmotion driver crashes on gnome session startup
Hi,
I have just updated a tablet PC after about 1 year. This included
switching to gnome2, and from sawfish to metacity. Since this change, I
cannot start gnome anymore. GDM still comes up fine, but with gnome
session and debian session, the splash still comes up, and then the X
server crashes and restarts. I've upgraded to the experimental xfree
drivers, but the problem remains. Xsession works fine.
The machine is a transmeta-based device, using 2.4.19 kernel. I've set
the NoAccel option in the Xfree config. Maybe some codepath gets
triggered that uses an instruction that's not available on transmeta?
The X log after the crash is attached. Only the last few lines are
actually produced after starting the debian session
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs).
XFree86 Version 4.3.0.1 (Debian 4.3.0-0pre1v5 20031207095205
daniels@debian.org)Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.23-pre6 i686 [ELF]
Build Date: 07 December 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.4.19 (root@mrs_cake) (gcc version 2.95.4
20011002 (Debian prerelease)) #1 Thu Nov 7 19:21:33 GMT 2002
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sat Jan 10 19:55:57 2004
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "cake"
(**) | |-->Device "cake"
(**) |-->Input Device "Generic Keyboard"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "touchscreen0"
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(**) FontPath set to
"unix/:7110,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(++) using VT number 8
(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1279,0295 card 1279,0295 rev 01 class 06,00,00
hdr 00
(II) PCI: 00:04:0: chip 10b9,5451 card 10b9,5451 rev 01 class 04,01,00
hdr 00
(II) PCI: 00:05:0: chip 104c,ac50 card 4000,0000 rev 01 class 06,07,00
hdr 02
(II) PCI: 00:06:0: chip 126f,0710 card 126f,0710 rev a3 class 03,00,00
hdr 00
(II) PCI: 00:07:0: chip 10b9,1533 card 10b9,1533 rev 00 class 06,01,00
hdr 00
(II) PCI: 00:0f:0: chip 10b9,5229 card 0000,0000 rev c3 class 01,01,b4
hdr 00
(II) PCI: 00:11:0: chip 10b9,7101 card 10b9,7101 rev 00 class 06,80,00
hdr 00
(II) PCI: 00:14:0: chip 10b9,5237 card 0000,0000 rev 03 class 0c,03,10
hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 1: bridge is at (0:5:0), (0,1,4), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0x10800000 - 0x10bfffff (0x400000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0x10400000 - 0x107fffff (0x400000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:6:0) Silicon Motion, Inc. SM710 LynxEM rev 163, Mem @
0xfd000000/24(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xfc000000 from 0xfc0fffff to
0xfbffffff
(II) Active PCI resource ranges:
[0] -1 0 0x000d8000 - 0x000d8fff (0x1000) MX[B]
[1] -1 0 0xfc100000 - 0xfc100fff (0x1000) MX[B]
[2] -1 0 0xfc000000 - 0xfbffffff (0x0) MX[B]O
[3] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[4] -1 0 0x00001000 - 0x0000100f (0x10) IX[B]
[5] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0x000d8000 - 0x000d8fff (0x1000) MX[B]
[1] -1 0 0xfc100000 - 0xfc100fff (0x1000) MX[B]
[2] -1 0 0xfc000000 - 0xfbffffff (0x0) MX[B]O
[3] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[4] -1 0 0x00001000 - 0x0000100f (0x10) IX[B]
[5] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000d7fff (0x18000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000d7fff (0x18000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x000d8000 - 0x000d8fff (0x1000) MX[B]
[6] -1 0 0xfc100000 - 0xfc100fff (0x1000) MX[B]
[7] -1 0 0xfc000000 - 0xfbffffff (0x0) MX[B]O
[8] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0 0x00001000 - 0x0000100f (0x10) IX[B]
[12] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
Skipping
"/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o": No
symbols found
Skipping
"/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o": No
symbols found
Skipping
"/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o": No
symbols found
Skipping
"/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_vertex.o": No
symbols found
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No
symbols found
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mutouch"
(II) Loading /usr/X11R6/lib/modules/input/mutouch_drv.o
(II) Module mutouch: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) LoadModule: "siliconmotion"
(II) Loading /usr/X11R6/lib/modules/drivers/siliconmotion_drv.o
(II) Module siliconmotion: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.3.1
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mutouch"
(II) Reloading /usr/X11R6/lib/modules/input/mutouch_drv.o
(II) Silicon Motion: driver (version 1.3.1) for Silicon Motion Lynx
chipsets:
Lynx, LynxE, Lynx3D, LynxEM, LynxEM+, Lynx3DM
(II) Primary Device is: PCI 00:06:0
(--) Assigning device section with no busID to primary device
(--) Chipset LynxEM found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000d7fff (0x18000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x000d8000 - 0x000d8fff (0x1000) MX[B]
[6] -1 0 0xfc100000 - 0xfc100fff (0x1000) MX[B]
[7] -1 0 0xfc000000 - 0xfbffffff (0x0) MX[B]O
[8] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0 0x00001000 - 0x0000100f (0x10) IX[B]
[12] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000d7fff (0x18000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x000d8000 - 0x000d8fff (0x1000) MX[B]
[6] -1 0 0xfc100000 - 0xfc100fff (0x1000) MX[B]
[7] -1 0 0xfc000000 - 0xfbffffff (0x0) MX[B]O
[8] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[9] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[10] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[11] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x00001000 - 0x0000100f (0x10) IX[B]
[15] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[16] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[17] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(**) Silicon Motion(0): Depth 24, (--) framebuffer bpp 24
(==) Silicon Motion(0): RGB weight 888
(==) Silicon Motion(0): Default visual is TrueColor
(**) Silicon Motion(0): Option "NoAccel" "True"
(**) Silicon Motion(0): Option: NoAccel - Acceleration disabled
(==) Silicon Motion(0): Using Hardware Cursor
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) Silicon Motion(0): Primary V_BIOS segment is: 0xc000
(WW) System lacks support for changing MTRRs
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/X11R6/lib/modules/libvbe.a
(II) Silicon Motion(0): VESA BIOS detected
(II) Silicon Motion(0): VESA VBE Version 2.0
(II) Silicon Motion(0): VESA VBE Total Mem: 4096 kB
(II) Silicon Motion(0): VESA VBE OEM: Silicon Motion SM710 VGA BIOS
(II) Silicon Motion(0): VESA VBE OEM Software Rev: 2.0
(II) Silicon Motion(0): VESA VBE OEM Vendor: SM710
(II) Silicon Motion(0): VESA VBE OEM Product: SM710
(II) Silicon Motion(0): VESA VBE OEM Product Rev:
(--) Silicon Motion(0): Chipset: "LynxEM"
(II) Silicon Motion(0): Cursor Offset: FFFFFC00 Reserved: FFFFF800
(II) Silicon Motion(0): TFT Panel Size = 1024x768
(II) Silicon Motion(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0,
hwp->PIOOffset is 0x0000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.6
(II) Silicon Motion(0): I2C bus "I2C bus" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) Silicon Motion(0): VESA VBE DDC supported
(II) Silicon Motion(0): VESA VBE DDC Level none
(II) Silicon Motion(0): VESA VBE DDC transfer in appr. 0 sec.
(II) Silicon Motion(0): VESA VBE DDC read successfully
(==) Silicon Motion(0): Using gamma correction (1.0, 1.0, 1.0)
(--) Silicon Motion(0): videoram: 4096kB
(--) Silicon Motion(0): Detected current MCLK value of 85.909 MHz
(II) Silicon Motion(0): cake: Using hsync range of 28.00-49.00 kHz
(II) Silicon Motion(0): cake: Using vrefresh range of 40.00-70.00 Hz
(II) Silicon Motion(0): Clock range: 20.00 to 135.00 MHz
(II) Silicon Motion(0): Mode: 640x350 24-bpp, 85.079948Hz
(II) Silicon Motion(0): Not using default mode "640x350" (vrefresh out
of range)(II) Silicon Motion(0): Not using default mode "320x175" (bad
mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 640x400 24-bpp, 85.079948Hz
(II) Silicon Motion(0): Not using default mode "640x400" (vrefresh out
of range)(II) Silicon Motion(0): Not using default mode "320x200" (bad
mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 720x400 24-bpp, 85.038902Hz
(II) Silicon Motion(0): Not using default mode "720x400" (vrefresh out
of range)(II) Silicon Motion(0): Not using default mode "360x200" (bad
mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 640x480 24-bpp, 60.000000Hz
(II) Silicon Motion(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 640x480 24-bpp, 72.808800Hz
(II) Silicon Motion(0): Not using default mode "640x480" (vrefresh out
of range)(II) Silicon Motion(0): Not using default mode "320x240" (bad
mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 640x480 24-bpp, 75.000000Hz
(II) Silicon Motion(0): Not using default mode "640x480" (vrefresh out
of range)(II) Silicon Motion(0): Not using default mode "320x240" (bad
mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 640x480 24-bpp, 85.008308Hz
(II) Silicon Motion(0): Not using default mode "640x480" (vrefresh out
of range)(II) Silicon Motion(0): Not using default mode "320x240" (bad
mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 800x600 24-bpp, 56.250000Hz
(II) Silicon Motion(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 800x600 24-bpp, 60.316540Hz
(II) Silicon Motion(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 800x600 24-bpp, 72.187569Hz
(II) Silicon Motion(0): Not using default mode "800x600" (vrefresh out
of range)(II) Silicon Motion(0): Not using default mode "400x300" (bad
mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 800x600 24-bpp, 75.000000Hz
(II) Silicon Motion(0): Not using default mode "800x600" (vrefresh out
of range)(II) Silicon Motion(0): Not using default mode "400x300" (bad
mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 800x600 24-bpp, 85.136887Hz
(II) Silicon Motion(0): Not using default mode "800x600" (hsync out of
range)
(II) Silicon Motion(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 1024x768 24-bpp, 60.003841Hz
(II) Silicon Motion(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 1024x768 24-bpp, 70.069359Hz
(II) Silicon Motion(0): Not using default mode "1024x768" (hsync out of
range)
(II) Silicon Motion(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 1024x768 24-bpp, 75.076218Hz
(II) Silicon Motion(0): Not using default mode "1024x768" (hsync out of
range)
(II) Silicon Motion(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 1024x768 24-bpp, 84.996689Hz
(II) Silicon Motion(0): Not using default mode "1024x768" (hsync out of
range)
(II) Silicon Motion(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 1152x864 24-bpp, 75.000000Hz
(II) Silicon Motion(0): Not using default mode "1152x864" (exceeds panel
dimensions)
(II) Silicon Motion(0): Not using default mode "576x432" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 1280x960 24-bpp, 60.000000Hz
(II) Silicon Motion(0): Not using default mode "1280x960" (exceeds panel
dimensions)
(II) Silicon Motion(0): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1280x960" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 1280x1024 24-bpp, 60.019741Hz
(II) Silicon Motion(0): Not using default mode "1280x1024" (exceeds
panel dimensions)
(II) Silicon Motion(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 1280x1024 24-bpp, 75.024673Hz
(II) Silicon Motion(0): Not using default mode "1280x1024" (exceeds
panel dimensions)
(II) Silicon Motion(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1280x1024" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1600x1200" (insufficient
memory for mode)
(II) Silicon Motion(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1600x1200" (insufficient
memory for mode)
(II) Silicon Motion(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1600x1200" (insufficient
memory for mode)
(II) Silicon Motion(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1600x1200" (insufficient
memory for mode)
(II) Silicon Motion(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1600x1200" (insufficient
memory for mode)
(II) Silicon Motion(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1792x1344" (insufficient
memory for mode)
(II) Silicon Motion(0): Not using default mode "896x672" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1792x1344" (insufficient
memory for mode)
(II) Silicon Motion(0): Not using default mode "896x672" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1856x1392" (insufficient
memory for mode)
(II) Silicon Motion(0): Not using default mode "928x696" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1856x1392" (insufficient
memory for mode)
(II) Silicon Motion(0): Not using default mode "928x696" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1920x1440" (insufficient
memory for mode)
(II) Silicon Motion(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1920x1440" (insufficient
memory for mode)
(II) Silicon Motion(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 832x624 24-bpp, 74.551270Hz
(II) Silicon Motion(0): Not using default mode "832x624" (hsync out of
range)
(II) Silicon Motion(0): Not using default mode "416x312" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 1152x768 24-bpp, 54.781902Hz
(II) Silicon Motion(0): Not using default mode "1152x768" (exceeds panel
dimensions)
(II) Silicon Motion(0): Not using default mode "576x384" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1400x1050" (insufficient
memory for mode)
(II) Silicon Motion(0): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1400x1050" (insufficient
memory for mode)
(II) Silicon Motion(0): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1600x1024" (insufficient
memory for mode)
(II) Silicon Motion(0): Not using default mode "800x512" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1920x1440" (insufficient
memory for mode)
(II) Silicon Motion(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "2048x1536" (insufficient
memory for mode)
(II) Silicon Motion(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "2048x1536" (insufficient
memory for mode)
(II) Silicon Motion(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "2048x1536" (insufficient
memory for mode)
(II) Silicon Motion(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 1024x768 24-bpp, 60.003841Hz
(II) Silicon Motion(0): Mode: 800x600 24-bpp, 60.316540Hz
(II) Silicon Motion(0): Mode: 640x480 24-bpp, 60.000000Hz
(II) Silicon Motion(0): Mode: 800x600 24-bpp, 56.250000Hz
(--) Silicon Motion(0): Virtual size is 1024x768 (pitch 1024)
(**) Silicon Motion(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz,
60.0 Hz
(II) Silicon Motion(0): Modeline "1024x768" 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync
(**) Silicon Motion(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) Silicon Motion(0): Modeline "800x600" 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync
(**) Silicon Motion(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) Silicon Motion(0): Modeline "640x480" 25.20 640 656 752 800 480
490 492 525 -hsync -vsync
(**) Silicon Motion(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) Silicon Motion(0): Modeline "800x600" 36.00 800 824 896 1024
600 601 603 625 +hsync +vsync
(==) Silicon Motion(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(--) Depth 24 pixmap format is 24 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B]
[1] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000d7fff (0x18000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0x000d8000 - 0x000d8fff (0x1000) MX[B]
[7] -1 0 0xfc100000 - 0xfc100fff (0x1000) MX[B]
[8] -1 0 0xfc000000 - 0xfbffffff (0x0) MX[B]O
[9] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0x00001000 - 0x0000100f (0x10) IX[B]
[16] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[17] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[18] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Silicon Motion(0): Cursor Offset: 003FFC00 Reserved: 003FF800
(II) Silicon Motion(0): TFT Panel Size = 1024x768
(II) Silicon Motion(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0,
hwp->PIOOffset is 0x0000
(II) Silicon Motion(0): Primary V_BIOS segment is: 0xc000
(II) Silicon Motion(0): Current mode 0x03.
(II) Silicon Motion(0): Setting mode 0x63
(II) Silicon Motion(0): FrameBuffer Box: 0,0 - 1024,1364
(**) Option "dpms"
(**) Silicon Motion(0): DPMS enabled
(II) Silicon Motion(0): I2C device "I2C bus:SAA 7111A" registered at
address 0x48.
(II) Silicon Motion(0): I2C device "I2C bus:SAA 7111A" removed.
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) MicroTouch FINGER input device: /dev/ttyS0
(**) Option "CorePointer"
(**) FINGER: Core Pointer
(**) Microtouch X device name: MuTFinger
(**) Option "ScreenNo" "0"
(**) Microtouch associated screen: 0
(**) Option "MaxX" "-300"
(**) Microtouch maximum x position: -300
(**) Option "MinX" "16883"
(**) Microtouch minimum x position: 16883
(**) Option "MaxY" "-400"
(**) Microtouch maximum y position: -400
(**) Option "MinY" "16683"
(**) Microtouch minimum y position: 16683
(**) Microtouch ThruGlass frequency is: 0
(**) Option "DebugLevel" "5"
(**) Microtouch debug level sets to 5
(**) Option "PortraitMode" "Landscape"
(**) Microtouch device will work in Landscape mode
(II) MicroTouch: reverse x mode (minimum x position >= maximum x position)
(II) MicroTouch: reverse y mode (minimum y position >= maximum y position)
(WW) MuTFinger: does not have core pointer capabilities
(II) XINPUT: Adding extended input device "MuTFinger" (type: MicroTouch
Finger)
(II) Server_Terminate keybinding not found
MicroTouch finger init...
Done.
MicroTouch finger on...
MicroTouch touchscreen opening : /dev/ttyS0
(**) Option "Device" "/dev/ttyS0"
(**) Option "BaudRate" "9600"
(**) Option "StopBits" "1"
(**) Option "DataBits" "8"
(**) Option "Parity" "None"
(**) Option "Vmin" "10"
(**) Option "Vtime" "1"
(**) Option "FlowControl" "None"
Sending packet : 0x1 0x52 0xD 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Waiting a reply
Waiting 300 ms for data from port
Entering xf86MuTGetReply with buffer_p == 0
buffer_p is 0, Trying to read 256 bytes from port
Read 3 bytes of reply
Sending packet : 0x1 0x4F 0x49 0xD 0x0 0x0 0x0 0x0 0x0 0x0
Waiting a reply
Waiting 300 ms for data from port
Entering xf86MuTGetReply with buffer_p == 0
buffer_p is 0, Trying to read 256 bytes from port
Read 8 bytes of reply
(--) MicroTouch touchscreen is a , connected through a serial port.
(--) MicroTouch controller firmware revision is 2.40.
Sending packet : 0x1 0x55 0x54 0xD 0x0 0x0 0x0 0x0 0x0 0x0
Waiting a reply
Waiting 300 ms for data from port
Entering xf86MuTGetReply with buffer_p == 0
buffer_p is 0, Trying to read 256 bytes from port
Read 10 bytes of reply
(--) MicroTouch status of errors: 00.
Sending packet : 0x1 0x46 0x54 0xD 0x0 0x0 0x0 0x0 0x0 0x0
Waiting a reply
Waiting 300 ms for data from port
Entering xf86MuTGetReply with buffer_p == 0
buffer_p is 0, Trying to read 256 bytes from port
Read 3 bytes of reply
Sending packet : 0x1 0x4D 0x53 0xD 0x0 0x0 0x0 0x0 0x0 0x0
Waiting a reply
Waiting 300 ms for data from port
Entering xf86MuTGetReply with buffer_p == 0
buffer_p is 0, Trying to read 256 bytes from port
Read 3 bytes of reply
Sending packet : 0x1 0x50 0x4F 0xD 0x0 0x0 0x0 0x0 0x0 0x0
Waiting a reply
Waiting 300 ms for data from port
Entering xf86MuTGetReply with buffer_p == 0
buffer_p is 0, Trying to read 256 bytes from port
Read 3 bytes of reply
Sending packet : 0x1 0x46 0x4F 0xD 0x0 0x0 0x0 0x0 0x0 0x0
Waiting a reply
Waiting 300 ms for data from port
Entering xf86MuTGetReply with buffer_p == 0
buffer_p is 0, Trying to read 256 bytes from port
Read 3 bytes of reply
Done
Warning: font renderer for ".pcf" already registered at priority 0
Warning: font renderer for ".pcf.Z" already registered at priority 0
Warning: font renderer for ".pcf.gz" already registered at priority 0
Warning: font renderer for ".snf" already registered at priority 0
Warning: font renderer for ".snf.Z" already registered at priority 0
Warning: font renderer for ".snf.gz" already registered at priority 0
Warning: font renderer for ".bdf" already registered at priority 0
Warning: font renderer for ".bdf.Z" already registered at priority 0
Warning: font renderer for ".bdf.gz" already registered at priority 0
Warning: font renderer for ".pmf" already registered at priority 0
*** If unresolved symbols were reported above, they might not
*** be the reason for the server aborting.
Fatal server error:
Caught signal 4. Server aborting
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to debian-x@lists.debian.org.
(II) Silicon Motion(0): Setting mode 0x03
mrs_cake:/usr/src#
--
-----------------------------------------------------------------------
Thorsten Schnier
School of Computer Science
University of Birminghan
T.Schnier@cs.bham.ac.uk
thorsten@schnier.net
Reply to: