[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#268015: xserver-xfree86: [ati/atimic] ATI 3D Rage LT Pro line drawing buggy



Package: xserver-xfree86
Version: 4.3.0.dfsg.1-6
Severity: normal


sometimes lines are drawn incorrectly
e.g. x11perf -seg500 shows the problem instantly
as the lines are drawn outside of the test window

This might be related to bug #176091
I have added the following lines to my XF86Config-4 file:
	# because acceleration hardware might have problems.
	Option "XaaNoSolidBresenhamLine"
	Option "XaaNoSolidHorVertLine"
	Option "XaaNoSolidTwoPointLine"
This made the problem going away.

So this bug report is adding information that this problem in the XAA
code might still be exist and would need fixing or
that somehow those configuration lines should be suggested for affected
cards if this really is a hardware problem (note that #176091 only 
mentions Ati Radeon which makes a bug in Xfree more likely).

(There might have been a premature version of this bugreport submitted,
due to a usability problem with a reportbug version.)


-- Package-specific info:
Contents of /var/lib/xfree86/X.roster:
xserver-xfree86

/etc/X11/X target unchanged from checksum in /var/lib/xfree86/X.md5sum.

X server symlink status:
lrwxrwxrwx    1 root     root           20 2004-02-24 17:07 /etc/X11/X -> /usr/bin/X11/XFree86
-rwxr-xr-x    1 root     root      1898712 2004-07-09 08:53 /usr/bin/X11/XFree86

Contents of /var/lib/xfree86/XF86Config-4.roster:
xserver-xfree86

VGA-compatible devices on PCI bus:
0000:00:11.0 VGA compatible controller: ATI Technologies Inc 3D Rage LT Pro (rev dc)
0000:00:11.0 Class 0300: 1002:4c49 (rev dc)

/etc/X11/XF86Config-4 does not match checksum in /var/lib/xfree86/XF86Config-4.md5sum.

XFree86 X server configuration file status:
-rw-r--r--    1 root     root         3175 2004-02-25 12:55 /etc/X11/XF86Config-4

Contents of /etc/X11/XF86Config-4:
# XF86Config-4 (XFree86 X server configuration file) generated by dexconf, the
# Debian X Configuration tool, using values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# This file is automatically updated on xserver-xfree86 package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xfree86
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
#   cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
#   md5sum /etc/X11/XF86Config-4 > /var/lib/xfree86/XF86Config-4.md5sum
#   dpkg-reconfigure xserver-xfree86

Section "Files"
	FontPath	"unix/:7100"			# local font server
	# if the local font server has problems, we can fall back on these
	FontPath	"/usr/lib/X11/fonts/Type1"
	FontPath	"/usr/lib/X11/fonts/CID"
	FontPath	"/usr/lib/X11/fonts/Speedo"
	FontPath	"/usr/lib/X11/fonts/misc"
	FontPath	"/usr/lib/X11/fonts/cyrillic"
	FontPath	"/usr/lib/X11/fonts/100dpi"
	FontPath	"/usr/lib/X11/fonts/75dpi"
EndSection

Section "Module"
	Load	"GLcore"
	Load	"bitmap"
	Load	"dbe"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"record"
	Load	"speedo"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
# Motfied after  Instruction from:
# http://libarynth.f0.am/cgi-bin/view/Libarynth/DebianPPC
# Bernhard 20040225
	Identifier	"Generic Keyboard"
	Driver		"keyboard"
	Option		"CoreKeyboard"
        Option          "LeftAlt"       "Meta"
        Option          "RightAlt"      "Meta"
        Option          "ScrollLock"    "Compose"
	Option          "RightCtl"      "Control"
	Option		"XkbRules"	"xfree86"
	# We don't use macintosh
	#Option		"XkbModel"	"macintosh"
	Option		"XkbLayout"	"de"
	Option		"XkbVariant"	"nodeadkeys"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "Device"
	Identifier	"ATI 3D Rage LT Pro"
	Driver		"ati"
	ChipSet		"mach64"
	BusID		"PCI:0:17:0"
	# not necessary anymore?
	#Option		"UseFBDev"		"true"
	# might be used later
	Option "DMAMode"	"mmio"
EndSection

Section "Monitor"
	Identifier	"powerbook g3 lcd"
	HorizSync	30-60
	VertRefresh	50-75
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI 3D Rage LT Pro"
	Monitor		"powerbook g3 lcd"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1024x768"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
EndSection

Section "DRI"
	Mode	0666
EndSection



XFree86 X server log files on system:
-rw-r--r--    1 root     root        21630 2004-02-25 12:56 /var/log/XFree86.1.log
-rw-r--r--    1 root     root        32826 2004-08-25 15:17 /var/log/XFree86.0.log

Contents of most recent XFree86 X server log file
/var/log/XFree86.0.log:

This is a pre-release version of XFree86, and is not supported in any
way.  Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org.  Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs).

XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-6 20040709050738 branden@redwald.deadbeast.net)
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.25-powerpc-smp ppc [ELF] 
Build Date: 09 July 2004
	Before reporting problems, check http://www.XFree86.Org/
	to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.6.8-powerpc (root@dhcppc1) (gcc version 3.3.4 (Debian 1:3.3.4-9)) #1 Wed Aug 18 16:56:08 CEST 2004 
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Aug 25 14:42:18 2004
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "powerbook g3 lcd"
(**) |   |-->Device "ATI 3D Rage LT Pro"
(**) |-->Input Device "Generic Keyboard"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbLayout" "de"
(**) XKB: layout: "de"
(**) Option "XkbVariant" "nodeadkeys"
(**) XKB: variant: "nodeadkeys"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Configured Mouse"
(WW) The directory "/usr/lib/X11/fonts/CID" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
	Entry deleted from font path.
(**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(++) using VT number 7

(II) Open APM successful
(II) Module ABI versions:
	XFree86 ANSI C Emulation: 0.2
	XFree86 Video Driver: 0.6
	XFree86 XInput driver : 0.4
	XFree86 Server Extension : 0.2
	XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.6
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1057,0002 card 0000,0000 rev 40 class 06,00,00 hdr 00
(II) PCI: 00:0e:0: chip 11c1,5801 card 11c1,5801 rev 12 class 0c,03,10 hdr 00
(II) PCI: 00:0f:0: chip 123f,8888 card 123f,8888 rev 02 class 04,80,00 hdr 00
(II) PCI: 00:10:0: chip 106b,0017 card 0000,0000 rev 00 class ff,00,00 hdr 00
(II) PCI: 00:11:0: chip 1002,4c49 card 0000,0000 rev dc class 03,00,00 hdr 00
(II) PCI: 00:13:0: chip 104c,ac1e card 1400,0000 rev 00 class 06,07,00 hdr 02
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 1: bridge is at (0:19:0), (0,1,4), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 1 I/O range:
	[0] -1	0	0x00001400 - 0x000014ff (0x100) IX[B]
	[1] -1	0	0x00001800 - 0x000018ff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0x80000000 - 0x803fffff (0x400000) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0xfd000000 - 0xfd1fffff (0x200000) MX[B]
(--) PCI:*(0:17:0) ATI Technologies Inc 3D Rage LT Pro rev 220, Mem @ 0x81000000/24, 0x80881000/12, I/O @ 0x1000/8
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x00000000 - 0x00000000 (0x1) MX[B]
	[2] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[3] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) Active PCI resource ranges:
	[0] -1	0	0x80800000 - 0x8087ffff (0x80000) MX[B]
	[1] -1	0	0x80882000 - 0x80882fff (0x1000) MX[B]
	[2] -1	0	0x80881000 - 0x80881fff (0x1000) MX[B](B)
	[3] -1	0	0x81000000 - 0x81ffffff (0x1000000) MX[B](B)
	[4] -1	0	0x00000c00 - 0x00000cff (0x100) IX[B]
	[5] -1	0	0x00001000 - 0x000010ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0x80800000 - 0x8087ffff (0x80000) MX[B]
	[1] -1	0	0x80882000 - 0x80882fff (0x1000) MX[B]
	[2] -1	0	0x80881000 - 0x80881fff (0x1000) MX[B](B)
	[3] -1	0	0x81000000 - 0x81ffffff (0x1000000) MX[B](B)
	[4] -1	0	0x00000c00 - 0x00000cff (0x100) IX[B]
	[5] -1	0	0x00001000 - 0x000010ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x00000000 - 0x00000000 (0x1) MX[B]
	[2] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[3] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) All system resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x00000000 - 0x00000000 (0x1) MX[B]
	[2] -1	0	0x80800000 - 0x8087ffff (0x80000) MX[B]
	[3] -1	0	0x80882000 - 0x80882fff (0x1000) MX[B]
	[4] -1	0	0x80881000 - 0x80881fff (0x1000) MX[B](B)
	[5] -1	0	0x81000000 - 0x81ffffff (0x1000000) MX[B](B)
	[6] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[7] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[8] -1	0	0x00000c00 - 0x00000cff (0x100) IX[B]
	[9] -1	0	0x00001000 - 0x000010ff (0x100) IX[B](B)
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o":  No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o":  No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o":  No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_vertex.o":  No symbols found
(II) Module GLcore: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.2
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 2.0.2
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/libint10.a
(II) Module int10: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.13.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o":  No symbols found
(II) Module speedo: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.1
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.2
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.1.0
	ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 6.5.5
	Module class: XFree86 Video Driver
	ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	Module class: XFree86 XInput Driver
	ABI class: XFree86 XInput driver, version 0.4
(II) ATI: ATI driver (version 6.5.5) for chipset: ati
(II) R128: Driver for ATI Rage 128 chipsets:
	ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
	ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
	ATI Rage 128 Pro GL PA (AGP?), ATI Rage 128 Pro GL PB (AGP?),
	ATI Rage 128 Pro GL PC (AGP?), ATI Rage 128 Pro GL PD (PCI),
	ATI Rage 128 Pro GL PE (AGP?), ATI Rage 128 Pro GL PF (AGP),
	ATI Rage 128 Pro VR PG (AGP?), ATI Rage 128 Pro VR PH (AGP?),
	ATI Rage 128 Pro VR PI (AGP?), ATI Rage 128 Pro VR PJ (AGP?),
	ATI Rage 128 Pro VR PK (AGP?), ATI Rage 128 Pro VR PL (AGP?),
	ATI Rage 128 Pro VR PM (AGP?), ATI Rage 128 Pro VR PN (AGP?),
	ATI Rage 128 Pro VR PO (AGP?), ATI Rage 128 Pro VR PP (PCI),
	ATI Rage 128 Pro VR PQ (AGP?), ATI Rage 128 Pro VR PR (PCI),
	ATI Rage 128 Pro VR PS (AGP?), ATI Rage 128 Pro VR PT (AGP?),
	ATI Rage 128 Pro VR PU (AGP?), ATI Rage 128 Pro VR PV (AGP?),
	ATI Rage 128 Pro VR PW (AGP?), ATI Rage 128 Pro VR PX (AGP?),
	ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
	ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
	ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (AGP?),
	ATI Rage 128 4X SF (AGP?), ATI Rage 128 4X SG (AGP?),
	ATI Rage 128 4X SH (AGP?), ATI Rage 128 4X SK (AGP?),
	ATI Rage 128 4X SL (AGP?), ATI Rage 128 4X SM (AGP),
	ATI Rage 128 4X SN (AGP?), ATI Rage 128 Pro ULTRA TF (AGP),
	ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
	ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
	ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
	ATI Radeon IGP330/340/350 (A4) 4137,
	ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
	ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP),
	ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835,
	ATI Radeon 9200PRO 5960 (AGP), ATI Radeon 9200 5961 (AGP),
	ATI Radeon 9200 5962 (AGP), ATI Radeon 9200SE 5964 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
	ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9700 NF (AGP),
	ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
	ATI FireGL RV360 AV (AGP), ATI Radeon Mobility 9600 (M10) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2 (M11) NV (AGP), ATI Radeon 9800SE AH (AGP),
	ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
	ATI FireGL X2 AK (AGP), ATI Radeon 9800PRO NH (AGP),
	ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
	ATI Radeon 9800XT NJ (AGP)
(II) Primary Device is: PCI 00:11:0
(II) ATI:  Candidate "Device" section "ATI 3D Rage LT Pro".
(II) ATI:  Shared PCI/AGP Mach64 in slot 0:17:0 detected.
(II) ATI:  Shared PCI/AGP Mach64 in slot 0:17:0 assigned to active "Device" section "ATI 3D Rage LT Pro".
(II) Loading sub module "atimisc"
(II) LoadModule: "atimisc"
(II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o
(II) Module atimisc: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 6.5.5
	Module class: XFree86 Video Driver
	ABI class: XFree86 Video Driver, version 0.6
(II) resource ranges after probing:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x00000000 - 0x00000000 (0x1) MX[B]
	[2] -1	0	0x80800000 - 0x8087ffff (0x80000) MX[B]
	[3] -1	0	0x80882000 - 0x80882fff (0x1000) MX[B]
	[4] -1	0	0x80881000 - 0x80881fff (0x1000) MX[B](B)
	[5] -1	0	0x81000000 - 0x81ffffff (0x1000000) MX[B](B)
	[6] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[7] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[8] -1	0	0x00000c00 - 0x00000cff (0x100) IX[B]
	[9] -1	0	0x00001000 - 0x000010ff (0x100) IX[B](B)
(**) ATI(0): Chipset:  "mach64".
(**) ATI(0): Depth 24, (--) framebuffer bpp 32
(II) ATI(0): BIOS Data:  BIOSSize=0x0000, ROMTable=0x0000.
(II) ATI(0): BIOS Data:  ClockTable=0x0000, FrequencyTable=0x0000.
(II) ATI(0): BIOS Data:  LCDTable=0x0000, LCDPanelInfo=0x0000.
(II) ATI(0): BIOS Data:  VideoTable=0x0000, HardwareTable=0x0000.
(II) ATI(0): BIOS Data:  I2CType=0x00, Tuner=0x00, Decoder=0x00, Audio=0x0F.
(--) ATI(0): ATI 3D Rage LT Pro graphics controller detected.
(--) ATI(0): Chip type 4C49 "LI", version 4, foundry UMC, class 0, revision 0x03.
(--) ATI(0): PCI bus interface detected.
(--) ATI(0): ATI Mach64 adapter detected.
(!!) ATI(0): For information on using the multimedia capabilities
	of this adapter, please see http://gatos.sf.net.
(--) ATI(0): Internal RAMDAC (subtype 1) detected.
(==) ATI(0): RGB weight 888
(==) ATI(0): Default visual is TrueColor
(==) ATI(0): Using gamma correction (1.0, 1.0, 1.0)
(II) ATI(0): Using Mach64 accelerator CRTC.
(--) ATI(0): 1024x768 panel (ID 0) detected.
(--) ATI(0): Panel clock is 31.500 MHz.
(II) ATI(0): Using digital flat panel interface.
(II) ATI(0): Storing hardware cursor image at 0x817FFC00.
(II) ATI(0): Using 8 MB linear aperture at 0x81800000.
(!!) ATI(0): Virtual resolutions will be limited to 8191 kB
 due to linear aperture size and/or placement of hardware cursor image area.
(II) ATI(0): Using Block 0 MMIO aperture at 0x80881400.
(II) ATI(0): Using Block 1 MMIO aperture at 0x80881000.
(II) ATI(0): MMIO write caching enabled.
(--) ATI(0): 8192 kB of SDRAM (1:1) detected (using 8191 kB).
(WW) ATI(0): Cannot shadow an accelerated frame buffer.
(II) ATI(0): Engine XCLK 48.462 MHz;  Refresh rate code 7.
(--) ATI(0): Internal programmable clock generator detected.
(--) ATI(0): Reference clock 157.5/11 (14.318) MHz.
(!!) ATI(0): Conflicting XF86Config HorizSync specification(s) ignored.
(!!) ATI(0): Conflicting XF86Config VertRefresh specification(s) ignored.
(II) ATI(0): Maximum clock:  96.00 MHz
(II) ATI(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "576x432" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "640x480" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "640x480" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "640x512" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "640x512" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "640x512" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "800x600" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "800x600" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "800x600" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) ATI(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) ATI(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) ATI(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) ATI(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) ATI(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) ATI(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1152x768" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "700x525" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "700x525" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1024" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "800x512" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) ATI(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) ATI(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) ATI(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) ATI(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(--) ATI(0): Virtual size is 1024x768 (pitch 1024)
(**) ATI(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) ATI(0): Modeline "1024x768"   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync
(**) ATI(0):  Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) ATI(0): Modeline "1024x768"   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync
(**) ATI(0):  Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) ATI(0): Modeline "1024x768"   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync
(**) ATI(0):  Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) ATI(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync
(**) ATI(0):  Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.1 Hz (I)
(II) ATI(0): Modeline "1024x768"   44.90  1024 1032 1208 1264  768 768 776 817 interlace +hsync +vsync
(**) ATI(0):  Built-in mode "Native panel mode": 31.5 MHz, 30.3 kHz, 39.3 Hz
(II) ATI(0): Modeline "Native panel mode"   31.50  1024 1024 1032 1040  768 768 769 770
(**) ATI(0):  Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) ATI(0): Modeline "832x624"   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync
(**) ATI(0):  Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) ATI(0): Modeline "800x600"   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync
(**) ATI(0):  Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) ATI(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync
(**) ATI(0):  Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) ATI(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync
(**) ATI(0):  Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) ATI(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
(**) ATI(0):  Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) ATI(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync
(**) ATI(0):  Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) ATI(0): Modeline "640x480"   36.00  640 696 752 832  480 481 484 509 -hsync -vsync
(**) ATI(0):  Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) ATI(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 -hsync -vsync
(**) ATI(0):  Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) ATI(0): Modeline "640x480"   31.50  640 664 704 832  480 489 491 520 -hsync -vsync
(**) ATI(0):  Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) ATI(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(**) ATI(0):  Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) ATI(0): Modeline "720x400"   35.50  720 756 828 936  400 401 404 446 -hsync +vsync
(**) ATI(0):  Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) ATI(0): Modeline "640x400"   31.50  640 672 736 832  400 401 404 445 -hsync +vsync
(**) ATI(0):  Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) ATI(0): Modeline "640x350"   31.50  640 672 736 832  350 382 385 445 +hsync -vsync
(**) ATI(0):  Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) ATI(0): Modeline "576x384"   32.50  576 589 657 736  384 385 388 403 doublescan +hsync +vsync
(**) ATI(0):  Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
(II) ATI(0): Modeline "512x384"   47.25  512 536 584 688  384 384 386 404 doublescan +hsync +vsync
(**) ATI(0):  Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(II) ATI(0): Modeline "512x384"   39.40  512 520 568 656  384 384 386 400 doublescan +hsync +vsync
(**) ATI(0):  Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) ATI(0): Modeline "512x384"   37.50  512 524 592 664  384 385 388 403 doublescan -hsync -vsync
(**) ATI(0):  Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) ATI(0): Modeline "512x384"   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync
(**) ATI(0):  Default mode "512x384": 22.4 MHz, 35.5 kHz, 87.1 Hz (D)
(II) ATI(0): Modeline "512x384"   22.45  512 516 604 632  384 384 388 409 interlace doublescan +hsync +vsync
(**) ATI(0):  Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) ATI(0): Modeline "416x312"   28.64  416 432 464 576  312 312 314 333 doublescan -hsync -vsync
(**) ATI(0):  Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) ATI(0): Modeline "400x300"   28.15  400 416 448 524  300 300 302 315 doublescan +hsync +vsync
(**) ATI(0):  Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) ATI(0): Modeline "400x300"   24.75  400 408 448 528  300 300 302 312 doublescan +hsync +vsync
(**) ATI(0):  Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) ATI(0): Modeline "400x300"   25.00  400 428 488 520  300 318 321 333 doublescan +hsync +vsync
(**) ATI(0):  Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) ATI(0): Modeline "400x300"   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync
(**) ATI(0):  Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) ATI(0): Modeline "400x300"   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync
(**) ATI(0):  Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(II) ATI(0): Modeline "320x240"   18.00  320 348 376 416  240 240 242 254 doublescan -hsync -vsync
(**) ATI(0):  Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) ATI(0): Modeline "320x240"   15.75  320 328 360 420  240 240 242 250 doublescan -hsync -vsync
(**) ATI(0):  Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) ATI(0): Modeline "320x240"   15.75  320 332 352 416  240 244 245 260 doublescan -hsync -vsync
(**) ATI(0):  Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) ATI(0): Modeline "320x240"   12.60  320 328 376 400  240 245 246 262 doublescan -hsync -vsync
(**) ATI(0):  Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
(II) ATI(0): Modeline "360x200"   17.75  360 378 414 468  200 200 202 223 doublescan -hsync +vsync
(**) ATI(0):  Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) ATI(0): Modeline "320x200"   15.75  320 336 368 416  200 200 202 222 doublescan -hsync +vsync
(**) ATI(0):  Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) ATI(0): Modeline "320x175"   15.75  320 336 368 416  175 191 192 222 doublescan +hsync -vsync
(++) ATI(0): DPI set to (91, 91)
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.1.0
	ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.2.0
	ABI class: XFree86 Video Driver, version 0.6
(II) ATI(0): I2C bus "Mach64" initialized.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0x80881000 - 0x80881fff (0x1000) MS[B]
	[1] 0	0	0x81000000 - 0x81ffffff (0x1000000) MS[B]
	[2] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[3] -1	0	0x00000000 - 0x00000000 (0x1) MX[B]
	[4] -1	0	0x80800000 - 0x8087ffff (0x80000) MX[B]
	[5] -1	0	0x80882000 - 0x80882fff (0x1000) MX[B]
	[6] -1	0	0x80881000 - 0x80881fff (0x1000) MX[B](B)
	[7] -1	0	0x81000000 - 0x81ffffff (0x1000000) MX[B](B)
	[8] 0	0	0x00001000 - 0x000010ff (0x100) IS[B]
	[9] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[10] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[11] -1	0	0x00000c00 - 0x00000cff (0x100) IX[B]
	[12] -1	0	0x00001000 - 0x000010ff (0x100) IX[B](B)
(II) ATI(0): Largest offscreen areas (with overlaps):
(II) ATI(0): 	1024 x 1279 rectangle at 0,768
(II) ATI(0): 	768 x 1280 rectangle at 0,768
(II) ATI(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		32 128x128 slots
		10 256x256 slots
(==) ATI(0): Backing store disabled
(==) ATI(0): Silken mouse enabled
(**) Option "dpms"
(**) ATI(0): DPMS enabled
(WW) ATI(0): Option "DMAMode" is not used
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) Option "Protocol" "ImPS/2"
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 5
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Warning: font renderer for ".pcf" already registered at priority 0
Warning: font renderer for ".pcf.Z" already registered at priority 0
Warning: font renderer for ".pcf.gz" already registered at priority 0
Warning: font renderer for ".snf" already registered at priority 0
Warning: font renderer for ".snf.Z" already registered at priority 0
Warning: font renderer for ".snf.gz" already registered at priority 0
Warning: font renderer for ".bdf" already registered at priority 0
Warning: font renderer for ".bdf.Z" already registered at priority 0
Warning: font renderer for ".bdf.gz" already registered at priority 0
Warning: font renderer for ".pmf" already registered at priority 0
GetModeLine - scrn: 0 clock: 31500
GetModeLine - hdsp: 1024 hbeg: 1064 hend: 1200 httl: 1344
              vdsp: 768 vbeg: 771 vend: 777 vttl: 806 flags: 5
(II) 3rd Button detected: disabling emulate3Button
GetModeLine - scrn: 0 clock: 31500
GetModeLine - hdsp: 1024 hbeg: 1064 hend: 1200 httl: 1344
              vdsp: 768 vbeg: 771 vend: 777 vttl: 806 flags: 5
GetModeLine - scrn: 0 clock: 31500
GetModeLine - hdsp: 1024 hbeg: 1064 hend: 1200 httl: 1344
              vdsp: 768 vbeg: 771 vend: 777 vttl: 806 flags: 5
GetModeLine - scrn: 0 clock: 31500
GetModeLine - hdsp: 1024 hbeg: 1064 hend: 1200 httl: 1344
              vdsp: 768 vbeg: 771 vend: 777 vttl: 806 flags: 5


-- System Information:
Debian Release: testing/unstable
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: powerpc (ppc)
Kernel: Linux 2.6.8-powerpc
Locale: LANG=de_DE@euro, LC_CTYPE=de_DE@euro

Versions of packages xserver-xfree86 depends on:
ii  debconf [debconf-2.0]     1.4.29         Debian configuration management sy
ii  libc6                     2.3.2.ds1-13   GNU C Library: Shared libraries an
ii  xserver-common            4.3.0.dfsg.1-6 files and utilities common to all 
ii  zlib1g                    1:1.2.1.1-3    compression library - runtime

-- debconf information:
* xserver-xfree86/config/device/identifier: ATI 3D Rage LT Pro
  xserver-xfree86/config/monitor/screen-size: 17 inches (430 mm)
* xserver-xfree86/config/device/use_fbdev: true
* xserver-xfree86/config/monitor/selection-method: Medium
  xserver-xfree86/config/doublequote_in_string_error:
  shared/default-x-server: xserver-xfree86
* xserver-xfree86/config/inputdevice/mouse/emulate3buttons: false
* xserver-xfree86/config/device/bus_id: PCI:0:17:0
* xserver-xfree86/config/inputdevice/keyboard/layout: de
  xserver-xfree86/config/monitor/horiz-sync: 30-60
* xserver-xfree86/config/monitor/identifier: powerbook g3 lcd
  shared/no_known_x-server:
  xserver-xfree86/autodetect_mouse: true
* xserver-xfree86/config/device/video_ram:
* xserver-xfree86/config/monitor/mode-list: 1024x768 @ 75Hz
* xserver-xfree86/config/monitor/lcd: true
  xserver-xfree86/config/inputdevice/keyboard/internal:
* xserver-xfree86/config/inputdevice/keyboard/rules: xfree86
  xserver-xfree86/multiple_possible_x-drivers:
* xserver-xfree86/config/inputdevice/keyboard/model: macintosh
* xserver-xfree86/config/write_dri_section: true
* xserver-xfree86/config/device/driver: ati
  xserver-xfree86/config/monitor/vert-refresh: 50-75
* xserver-xfree86/config/display/default_depth: 24
* xserver-xfree86/config/inputdevice/mouse/zaxismapping: true
* xserver-xfree86/config/display/modes: 1024x768
  xserver-xfree86/config/device/bus_id_error:
* xserver-xfree86/config/modules: GLcore, bitmap, dbe, ddc, dri, extmod, freetype, glx, int10, record, speedo, type1, vbe
* xserver-xfree86/config/inputdevice/keyboard/options:
  xserver-xfree86/config/nonnumeric_string_error:
  xserver-xfree86/config/inputdevice/mouse/protocol: ImPS/2
  shared/multiple_possible_x-servers:
  xserver-xfree86/config/null_string_error:
  xserver-xfree86/config/monitor/range_input_error:
* xserver-xfree86/autodetect_video_card: false
* xserver-xfree86/config/inputdevice/keyboard/variant: nodeadkeys
* xserver-xfree86/config/inputdevice/mouse/port: /dev/input/mice
* xserver-xfree86/config/write_files_section: true
  xserver-xfree86/autodetect_monitor: true



Reply to: