X Strike Force XFree86 SVN commit: r1460 - branches/4.3.0/sid/debian
Author: branden
Date: 2004-05-28 12:29:21 -0500 (Fri, 28 May 2004)
New Revision: 1460
Modified:
branches/4.3.0/sid/debian/CHANGESETS
branches/4.3.0/sid/debian/TODO
branches/4.3.0/sid/debian/changelog
branches/4.3.0/sid/debian/control
branches/4.3.0/sid/debian/libx11-dev.install
branches/4.3.0/sid/debian/libxi-dev.install
branches/4.3.0/sid/debian/xserver-xfree86.config.in
branches/4.3.0/sid/debian/xserver-xfree86.templates
Log:
Merge revisions 1453 to HEAD from trunk.
Modified: branches/4.3.0/sid/debian/CHANGESETS
===================================================================
--- branches/4.3.0/sid/debian/CHANGESETS 2004-05-28 17:24:29 UTC (rev 1459)
+++ branches/4.3.0/sid/debian/CHANGESETS 2004-05-28 17:29:21 UTC (rev 1460)
@@ -14,4 +14,23 @@
#251119: Fix breakage of NumLock.
1452
+Rework xserver-xfree86/config/device/driver debconf logic. Attempt to populate
+driver choices by scanning filesystem first. observe() if we do not find any.
+Set default driver on an architecture-specific basis. Use vga for alpha; vesa
+for amd64, hurd-i386, and i386; and fbdev for everyone else, except mips and
+mipsel boxen that report themselves as "SGI Ind*" machines via /proc/cpuinfo,
+for which we default to newport. (Closes: #226193, #249614) Update
+xserver-xfree86/config/device/bus_id logic. Add comments describing why we
+don't default to a blank answer all the time. Use "1" as the default answer on
+systems that identify themselves as "SGI Indigo2" machines via /proc/cpuinfo.
+Update template description to tell SGI Indigo2 XL users to specify "1" for the
+BusID.
+ 1454
+
+Move XDeviceTimeCoord(3x) manpage from libx11-dev to libxi-dev, where it
+belongs. Make libxi-dev conflict/replace libx11-dev (<< 4.3.0.dfsg.1-3)
+so that upgrades proceed smoothly. Thanks to Stephen Kitt for identifying
+this problem. (Closes: #233839)
+ 1459
+
vim:set ai et sts=4 sw=4 tw=80:
Modified: branches/4.3.0/sid/debian/TODO
===================================================================
--- branches/4.3.0/sid/debian/TODO 2004-05-28 17:24:29 UTC (rev 1459)
+++ branches/4.3.0/sid/debian/TODO 2004-05-28 17:29:21 UTC (rev 1460)
@@ -12,8 +12,31 @@
These items are listed in descending order of priority; that is, the most
important items come first.
-Post 4.3.0-1
-------------
+4.3.0.dfsg.1-4
+--------------
+
+* #237583: xlibs: BKSL key doesn't work when 'us' is one of multiple layouts;
+ patch in upstream CVS by 2003-12-18
+* Merge Josh Triplett's clean-room reimplementation of post-#187 changes to
+ XTerm in XFree86 CVS.
+* Upgrade XTerm to #190. Check for changes pulled from XFree86 CVS and deal
+ with them appropriately.
+* #236187: xserver-xfree86: [ati/r128] xscreensaver screenhacks lock system
+ ('(EE) R128(0): Idle timed out, resetting engine...') on Rage 128 RE/SG rev 0
+ + Apply patch from Dan Jacobowitz.
+* #247387: xlibs: Can't type numbers with AltGr with /etc/X11/xkb/symbols/pc/lt
+ key map
+ + Apply patch by Mantas Kriaučiūnas via Vytautas Lukenskas.
+* #225526: Fix PCI domains / Mach64 cards on SPARCs running Linux 2.6. Apply
+ patch from "the Gentoo SPARC folks" -- would be nice to find out who they
+ are.]
+* #245246: Apply hot pokers to Ben Collins until we extract a working patch for
+ XAA and Render support for the sunffb driver. Mmmm, burning manflesh...
+* Apply "other half" of SPARC 64-bit avoidance patch to Mesa; see #241331.
+
+4.3.0.dfsg.1-5
+--------------
+
* Re-do migration of /usr/X11R6/lib/X11/{app-defaults,xkb}:
+ stop shipping symlink
+ In {libxt6,xlibs}.preinst:
@@ -37,8 +60,6 @@
configuration with readline frontend; lack of defaults
+ #229097: xserver-xfree86: [debconf] should tell the user the file is not
going to be rewritten earlier [BR]
- + #226193: xserver-xfree86: [debconf] need better (and arch-specific) video
- driver defaults when discover fails [BR]
+ #226365: xserver-xfree86: [debconf] ask monitor/selection-method at medium
priority, and make the default answer medium [BR]
+ #149586: xserver-xfree86: [debconf] errors from discover should not be
@@ -54,8 +75,9 @@
+ #229850: xserver-xfree86: [debconf] monitor selection methods need to be
more careful about clobbering autodetected monitor sync ranges; study Jay
Berkenbilt's feedback [BR]
- + #249614: xserver-xfree86: [debconf] autodetect SGI Indy and Indigo2 systems
- [BR]
+
+Post 4.3.0-1
+------------
* hurd-i386 MANIFEST, and probably some debhelper files, are out of date.
* Should xc/include/{Xw32defs.h,Xwinsock.h} be installed (and shipped) for
the benefit of cross-compilers? Check upstream Imakeage.
@@ -97,25 +119,10 @@
generic ones by fixing upstream Imakeage to not turn extra stuff off when
the XFree86 X server is not being built (like xmodmap.std). It ships
libXxf86vm.a but not the corresponding manpages.
-* #246782: apply "carbonated beverage <ramune@net-ronin.org>"'s patch to enable
- PCI domain support on SPARCs for kernel 2.6. Consider cleaning up the logic a
- little bit.
* Make an xlibmesa-dri.bug script to gather some info --- video card vendor and
model, if nothing else.
* Scan all -dev packages' *.h files for undeclared dependencies due to
#includes.
-* #237583: xlibs: BKSL key doesn't work when 'us' is one of multiple layouts;
- patch in upstream CVS by 2003-12-18
-* Merge Josh Triplett's clean-room reimplementation of post-#187 changes to
- XTerm in XFree86 CVS.
-* Upgrade XTerm to #190. Check for changes pulled from XFree86 CVS and deal
- with them appropriately.
-* #236817: xserver-xfree86: [ati/r128] xscreensaver screenhacks lock system
- ('(EE) R128(0): Idle timed out, resetting engine...') on Rage 128 RE/SG rev 0
- + Apply patch from Dan Jacobowitz.
-* #247387: xlibs: Can't type numbers with AltGr with /etc/X11/xkb/symbols/pc/lt
- key map
- + Apply patch by Mantas Kriaučiūnas via Vytautas Lukenskas.
* Stop building fonts (and possibly docs?) when building binary-arch target.
[Fabio, you're going to drag me into this kicking and screaming, aren't you?]
Modified: branches/4.3.0/sid/debian/changelog
===================================================================
--- branches/4.3.0/sid/debian/changelog 2004-05-28 17:24:29 UTC (rev 1459)
+++ branches/4.3.0/sid/debian/changelog 2004-05-28 17:29:21 UTC (rev 1460)
@@ -4,8 +4,30 @@
warped the XKB types/basic file 7 years backwards in time.
(Closes: #251119)
- -- Branden Robinson <branden@debian.org> Thu, 27 May 2004 03:58:57 -0500
+ * Rework xserver-xfree86/config/device/driver debconf logic.
+ + Attempt to populate driver choices by scanning filesystem first.
+ + observe() if we do not find any.
+ + Set default driver on an architecture-specific basis. Use vga for
+ alpha; vesa for amd64, hurd-i386, and i386; and fbdev for everyone else,
+ except mips and mipsel boxen that report themselves as "SGI Ind*"
+ machines via /proc/cpuinfo, for which we default to newport.
+ (Closes: #226193, #249614)
+ * Update xserver-xfree86/config/device/bus_id logic.
+ + Add comments describing why we don't default to a blank answer all the
+ time.
+ + Use "1" as the default answer on systems that identify themselves as
+ "SGI Indigo2" machines via /proc/cpuinfo.
+ + Update template description to tell SGI Indigo2 XL users to specify "1"
+ for the BusID.
+
+ * Move XDeviceTimeCoord(3x) manpage from libx11-dev to libxi-dev, where it
+ belongs. Make libxi-dev conflict/replace libx11-dev (<< 4.3.0.dfsg.1-3)
+ so that upgrades proceed smoothly. Thanks to Stephen Kitt for identifying
+ this problem. (Closes: #233839)
+
+ -- Branden Robinson <branden@debian.org> Fri, 28 May 2004 12:15:50 -0500
+
xfree86 (4.3.0.dfsg.1-2) unstable; urgency=low
Changes by Branden Robinson:
Modified: branches/4.3.0/sid/debian/control
===================================================================
--- branches/4.3.0/sid/debian/control 2004-05-28 17:24:29 UTC (rev 1459)
+++ branches/4.3.0/sid/debian/control 2004-05-28 17:29:21 UTC (rev 1460)
@@ -456,13 +456,17 @@
Section: libdevel
Architecture: any
Depends: libxi6 (= ${Source-Version}), x-dev, libxext-dev, libx11-dev, libc6-dev | libc-dev
-Conflicts: xlibs-dev (<< 4.3.0)
-Replaces: xlibs-dev (<< 4.3.0)
+Conflicts: xlibs-dev (<< 4.3.0), libx11-dev (<< 4.3.0.dfsg.1-3)
+Replaces: xlibs-dev (<< 4.3.0), libx11-dev (<< 4.3.0.dfsg.1-3)
Description: X Window System Input extension library development files
Header files and a static version of the Xi library are provided by this
package.
.
See the libxi6 package for further information.
+ .
+ This package declares a versioned conflict with and replacement of
+ libx11-dev because some versions of the latter package mistakenly shipped
+ a maual page that should have been in this package intead.
Package: libxmu6
Section: libs
Modified: branches/4.3.0/sid/debian/libx11-dev.install
===================================================================
--- branches/4.3.0/sid/debian/libx11-dev.install 2004-05-28 17:24:29 UTC (rev 1459)
+++ branches/4.3.0/sid/debian/libx11-dev.install 2004-05-28 17:29:21 UTC (rev 1460)
@@ -163,7 +163,6 @@
usr/X11R6/man/man3/XDestroySubwindows.3x
usr/X11R6/man/man3/XDestroyWindow.3x
usr/X11R6/man/man3/XDestroyWindowEvent.3x
-usr/X11R6/man/man3/XDeviceTimeCoord.3x
usr/X11R6/man/man3/XDirectionalDependentDrawing.3x
usr/X11R6/man/man3/XDisableAccessControl.3x
usr/X11R6/man/man3/XDisplayKeycodes.3x
Modified: branches/4.3.0/sid/debian/libxi-dev.install
===================================================================
--- branches/4.3.0/sid/debian/libxi-dev.install 2004-05-28 17:24:29 UTC (rev 1459)
+++ branches/4.3.0/sid/debian/libxi-dev.install 2004-05-28 17:29:21 UTC (rev 1460)
@@ -11,6 +11,7 @@
usr/X11R6/man/man3/XChangePointerDevice.3x
usr/X11R6/man/man3/XCloseDevice.3x
usr/X11R6/man/man3/XDeviceBell.3x
+usr/X11R6/man/man3/XDeviceTimeCoord.3x
usr/X11R6/man/man3/XFreeDeviceList.3x
usr/X11R6/man/man3/XGetDeviceButtonMapping.3x
usr/X11R6/man/man3/XGetDeviceControl.3x
Modified: branches/4.3.0/sid/debian/xserver-xfree86.config.in
===================================================================
--- branches/4.3.0/sid/debian/xserver-xfree86.config.in 2004-05-28 17:24:29 UTC (rev 1459)
+++ branches/4.3.0/sid/debian/xserver-xfree86.config.in 2004-05-28 17:29:21 UTC (rev 1460)
@@ -548,81 +548,108 @@
# priority of xserver-xfree86/config/device/driver
PRIORITY=high
-# set a failsafe answer for xserver-xfree86/config/device/driver
-DEFAULT=vesa
+DRIVER_DIR=/usr/X11R6/lib/modules/drivers
+
+# Build list of available video drivers, omitting the atimisc, r128, and
+# radeon sub-modules (the ati driver knows when and how to load these).
+# v4l is not a display driver, and dummy is for advanced users.
+DRIVER_LIST="$(echo $(find "$DRIVER_DIR" -name '*_drv.o' 2>/dev/null \
+ | sed 's|^.*/\(.*\)_drv\.o|\1|' \
+ | egrep -v '(atimisc|dummy|r128|radeon|v4l)' | sort) \
+ | sed 's/ /, /g')"
+
+if [ -z "$DRIVER_LIST" ]; then
+ observe "no video driver modules found in $DRIVER_DIR"
+fi
+
+# Set a hard-coded module list (if necessary) and default driver module on an
+# architecture-specific basis.
+case "$ARCH" in
+ alpha)
+ DRIVER_LIST=${DRIVER_LIST:=ati, cirrus, glint, mga, nv, rendition, s3, s3virge, savage, siliconmotion, tdfx, tga, vga}
+ DEFAULT_DRIVER=vga
+ ;;
+ amd64)
+ DRIVER_LIST=${DRIVER_LIST:=apm, ark, ati, chips, cirrus, cyrix, fbdev, glint, i128, i740, i810, imstt, mga, neomagic, newport, nsc, nv, rendition, s3, s3virge, savage, siliconmotion, sis, tdfx, tga, trident, tseng, vesa, vga, via, vmware}
+ DEFAULT_DRIVER=vesa
+ ;;
+ arm|hppa)
+ DRIVER_LIST=${DRIVER_LIST:=ati, chips, fbdev, glint, mga, nv, s3, s3virge, savage, sis, tdfx, trident, vga}
+ DEFAULT_DRIVER=fbdev
+ ;;
+ hurd-i386)
+ DRIVER_LIST=${DRIVER_LIST:=apm, ark, ati, chips, cirrus, cyrix, fbdev, glint, i128, i740, i810, imstt, mga, neomagic, newport, nsc, nv, rendition, s3, s3virge, savage, siliconmotion, sis, tdfx, tga, trident, tseng, vesa, vga, vmware}
+ DEFAULT_DRIVER=vesa
+ ;;
+ i386)
+ DRIVER_LIST=${DRIVER_LIST:=apm, ark, ati, chips, cirrus, cyrix, fbdev, glide, glint, i128, i740, i810, imstt, mga, neomagic, newport, nsc, nv, rendition, s3, s3virge, savage, siliconmotion, sis, tdfx, tga, trident, tseng, vesa, vga, vmware}
+ DEFAULT_DRIVER=vesa
+ ;;
+ ia64)
+ DRIVER_LIST=${DRIVER_LIST:=apm, ark, ati, chips, cirrus, cyrix, fbdev, glint, i128, i740, i810, imstt, mga, neomagic, newport, nv, rendition, s3, s3virge, savage, siliconmotion, sis, tdfx, tga, trident, tseng, vesa, vga, vmware}
+ DEFAULT_DRIVER=fbdev
+ ;;
+ m68k|powerpc)
+ DRIVER_LIST=${DRIVER_LIST:=ati, chips, fbdev, glint, imstt, mga, nv, s3, s3virge, savage, sis, tdfx, trident, vga}
+ DEFAULT_DRIVER=fbdev
+ ;;
+ mips|mipsel)
+ DRIVER_LIST=${DRIVER_LIST:=ati, chips, fbdev, glint, mga, newport, nv, s3, s3virge, savage, sis, tdfx, trident}
+ # Are we dealing with an SGI Indy or Indigo2?
+ if [ -e /proc/cpuinfo ]; then
+ if grep -q "system type.*:.*SGI Ind"; then
+ PRIORITY=medium
+ DEFAULT_DRIVER=newport
+ fi
+ fi
+ DEFAULT_DRIVER=${DEFAULT_DRIVER:=fbdev}
+ ;;
+ sparc)
+ DRIVER_LIST=${DRIVER_LIST:=apm, ark, ati, chips, cirrus, fbdev, glint, i128, i740, imstt, mga, neomagic, nv, rendition, s3virge, savage, siliconmotion, sunbw2, suncg14, suncg3, suncg6, sunffb, sunleo, suntcx, tdfx, trident, vesa, vga}
+ DEFAULT_DRIVER=fbdev
+ ;;
+ *)
+ internal_error "no driver list known for architecture $ARCH"
+ ;;
+esac
+
+observe "available video driver list set to \"$DRIVER_LIST\""
+
# attempt to autodetect
-if which discover > /dev/null 2>&1; then
+if which discover >/dev/null 2>&1; then
if [ "$AUTODETECT_VIDEO_CARD" = "true" ]; then
if [ $NDRIVERS -eq 0 ]; then
- debug_echo "could not autodetect X server driver: no video card detected, or no driver known for it"
+ observe "could not autodetect X server driver: no video card" \
+ "detected, or no driver known for it"
elif [ $NDRIVERS -eq 1 ]; then
- debug_echo "autodetected X server driver: $DRIVERS"
+ observe "autodetected X server driver: $DRIVERS"
PRIORITY=low
- DEFAULT="$DRIVERS"
+ DEFAULT_DRIVER="$DRIVERS"
elif [ $NDRIVERS -gt 1 ]; then
- debug_echo "could not autodetect X server driver: multiple drivers for video cards"
- VIDEOCARD_DRIVER_REPORT=$(echo "$DISCOVERED_VIDEO" | awk 'BEGIN { FS="\t"; printf " %-30s%30s\n .\n", "Detected Video Card", "Suggested driver module" } { printf " %-50s%10s\n", $1, $3 } END { printf " .\n" }')
- # can't do this until there is a way to embed newlines into debconf command streams :(
- #db_subst shared/multiple_possible_x-drivers detected_cards "$VIDEOCARD_DRIVER_REPORT"
- debug_echo "$VIDEOCARD_DRIVER_REPORT"
+ observe "could not autodetect X server driver: multiple drivers for" \
+ "video cards"
+ VIDEOCARD_DRIVER_REPORT=$(echo "$DISCOVERED_VIDEO" \
+ | awk 'BEGIN { FS="\t"; printf " %-30s%30s\n .\n", "Detected Video Card", "Suggested driver module" } { printf " %-50s%10s\n", $1, $3 } END { printf " .\n" }')
+ # can't do this until there is a way to embed newlines into debconf
+ # command streams :(
+ # db_subst shared/multiple_possible_x-drivers detected_cards \
+ # "$VIDEOCARD_DRIVER_REPORT"
+ observe "$VIDEOCARD_DRIVER_REPORT"
+ PRIORITY=high
db_input "$(priority_ceil high)" xserver-xfree86/multiple_possible_x-drivers || debug_report_status "db_input $(priority_ceil high) xserver-xfree86/multiple_possible_x-drivers" "$?"
db_go
fi
else
- debug_echo "user declined video card autodetection (driver)"
+ observe "user declined video card autodetection (driver)"
fi
else
- debug_echo "could not autodetect X server driver: discover not found"
+ observe "could not autodetect X server driver: discover not found"
fi
-# Build list of available video drivers, omitting the atimisc, r128, and
-# radeon sub-modules (the ati driver knows when and how to load these).
-# v4l is not a display driver, and dummy is for advanced users.
-DRIVER_LIST="$(echo $(find /usr/X11R6/lib/modules/drivers -name '*_drv.o' \
- 2>/dev/null | sed 's|^.*/\(.*\)_drv\.o|\1|' \
- | egrep -v '(atimisc|dummy|r128|radeon|v4l)' | sort) \
- | sed 's/ /, /g')"
-
-if [ -z "$DRIVER_LIST" ]; then
- observe "no modules found in module directory; falling back to hard-coded" \
- "list for $ARCH"
- case "$ARCH" in
- alpha)
- DRIVER_LIST="ati, cirrus, glint, mga, nv, rendition, s3, s3virge, savage, siliconmotion, tdfx, tga, vga"
- ;;
- amd64)
- DRIVER_LIST="apm, ark, ati, chips, cirrus, cyrix, fbdev, glint, i128, i740, i810, imstt, mga, neomagic, newport, nsc, nv, rendition, s3, s3virge, savage, siliconmotion, sis, tdfx, tga, trident, tseng, vesa, vga, via, vmware"
- ;;
- arm|hppa)
- DRIVER_LIST="ati, chips, fbdev, glint, mga, nv, s3, s3virge, savage, sis, tdfx, trident, vga"
- ;;
- hurd-i386)
- DRIVER_LIST="apm, ark, ati, chips, cirrus, cyrix, fbdev, glint, i128, i740, i810, imstt, mga, neomagic, newport, nsc, nv, rendition, s3, s3virge, savage, siliconmotion, sis, tdfx, tga, trident, tseng, vesa, vga, via, vmware"
- ;;
- i386)
- DRIVER_LIST="apm, ark, ati, chips, cirrus, cyrix, fbdev, glide, glint, i128, i740, i810, imstt, mga, neomagic, newport, nsc, nv, rendition, s3, s3virge, savage, siliconmotion, sis, tdfx, tga, trident, tseng, vesa, vga, via, vmware"
- ;;
- ia64)
- DRIVER_LIST="apm, ark, ati, chips, cirrus, cyrix, fbdev, glint, i128, i740, i810, imstt, mga, neomagic, newport, nv, rendition, s3, s3virge, savage, siliconmotion, sis, tdfx, tga, trident, tseng, vesa, vga, vmware"
- ;;
- m68k|powerpc)
- DRIVER_LIST="ati, chips, fbdev, glint, imstt, mga, nv, s3, s3virge, savage, sis, tdfx, trident, vga"
- ;;
- mips|mipsel)
- DRIVER_LIST="ati, chips, fbdev, glint, mga, newport, nv, s3, s3virge, savage, sis, tdfx, trident"
- ;;
- sparc)
- DRIVER_LIST="apm, ark, ati, chips, cirrus, fbdev, glint, i128, i740, imstt, mga, neomagic, nv, rendition, s3virge, savage, siliconmotion, sunbw2, suncg14, suncg3, suncg6, sunffb, sunleo, suntcx, tdfx, trident, vesa, vga"
- ;;
- *)
- internal_error "no driver list known for architecture $ARCH"
- ;;
- esac
-fi
-
db_subst xserver-xfree86/config/device/driver choices "$DRIVER_LIST"
-auto_answer db_input "$(priority_ceil $PRIORITY)" xserver-xfree86/config/device/driver "$DEFAULT"
+auto_answer db_input "$(priority_ceil $PRIORITY)" \
+ xserver-xfree86/config/device/driver "$DEFAULT_DRIVER"
# card identifier; try to set a sensible default
DEFAULT=
@@ -657,6 +684,11 @@
# BusID
PRIORITY=low
DEFAULT=
+
+# Some PowerPCs need to be told where to find the video card even if there is
+# only one in the machine (broken PCI bus code in the XFree86 X server, most
+# likely). If there are multiple video cards, we need to configure one as the
+# primary head.
if [ "$ARCH" = "powerpc" -o "$MULTIHEAD" = "yes" ]; then
if [ "$ARCH" = "powerpc" ]; then
PRIORITY=medium
@@ -676,6 +708,16 @@
fi
fi
fi
+
+# SGI Indigo2 XLs require a special hack, per Guido Guenther (see Debian
+# #249614).
+if [ -e /proc/cpuinfo ]; then
+ if grep -q "system type.*:.*SGI Indigo2"; then
+ PRIORITY=medium
+ DEFAULT=1
+ fi
+fi
+
# this question requires input validation
if [ -n "$DEFAULT" ]; then
auto_answer validate_bus_id_db_input "$(priority_ceil $PRIORITY)" xserver-xfree86/config/device/bus_id "$DEFAULT"
Modified: branches/4.3.0/sid/debian/xserver-xfree86.templates
===================================================================
--- branches/4.3.0/sid/debian/xserver-xfree86.templates 2004-05-28 17:24:29 UTC (rev 1459)
+++ branches/4.3.0/sid/debian/xserver-xfree86.templates 2004-05-28 17:29:21 UTC (rev 1460)
@@ -157,6 +157,8 @@
heads. Further configuration will have to be done manually in the X server
configuration file, /etc/X11/XF86Config-4.
.
+ Users of SGI Indigo2 XL machines should specify simply "1" here.
+ .
You may wish to use the "lspci" command to determine the bus location of your
PCI or AGP video card. Keep in mind that lspci reports the bus, device, and
function numbers in hexadecimal, not decimal.
@@ -164,8 +166,8 @@
When possible, this question has been pre-answered for you and you should
accept the default unless you know it doesn't work.
.
- Users of non-PowerPC machines with only one video card should leave this
- entry blank.
+ Users of machines other than PowerPCs or SGI Indigo2 XLs with only one video
+ card should leave this entry blank.
Template: xserver-xfree86/config/device/bus_id_error
Type: note
Reply to: