x server crashes on unstable...
Hi All,
I had recently changed my system from debian testing
to unstable. I am using the same XFConfig-4 file but
new xserver doesn't start. I am posting the outputs of
some commands and XFConfig-4 file. I would appreciate
any help.
========================================
startx:
X: warning; process set to priority -11 instead of
requested priority -10
X: exec of ../../usr/X11R6/bin/XF86_S3 failed
giving up.
xinit: No such file or directory (errno 2): unable
to connect to X server
xinit: No such process (errno 3): Server error.
===========================
XFree86.0.log file:
XFree86 Version 4.2.1.1 (Debian 4.2.1-6 20030225230350
branden@progeny.com) / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 18 October 2002
If the server is older than 6-12 months, or if your
card is
newer than the above date, look for a newer version
before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.20-586tsc i686 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==)
default setting,
(++) from command line, (!!) notice, (II)
informational,
(WW) warning, (EE) error, (NI) not
implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Apr
10 22:06:35 2003
(EE) Unable to locate/open config file
(EE) Error from xf86HandleConfigFile()
Fatal server error:
no screens found
When reporting a problem related to a server crash,
please send
the full server output, not just the last messages.
This can be found in the log file
"/var/log/XFree86.0.log".
Please report problems to debian-x@lists.debian.org.
===================================
X -configure:
X: exec of ../../usr/X11R6/bin/XF86_S3 failed
===================================
xf86cfg:
This is a pre-release version of XFree86, and is not
supported in any
way. Bugs may be reported to XFree86@XFree86.Org and
patches submitted
to fixes@XFree86.Org. Before reporting bugs in
pre-release versions,
please check the latest version in the XFree86 CVS
repository
(http://www.XFree86.Org/cvs)
XFree86 Version 4.2.1.1 (Debian 4.2.1-6 20030225230350
branden@progeny.com) / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 18 October 2002
If the server is older than 6-12 months, or if your
card is
newer than the above date, look for a newer version
before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.20-586tsc i686 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==)
default setting,
(++) from command line, (!!) notice, (II)
informational,
(WW) warning, (EE) error, (NI) not
implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.8.log", Time: Thu Apr
10 22:28:48 2003
List of video drivers:
nsc
radeon
atimisc
r128
dummy
mga
glint
nv
tga
s3
s3virge
sis
rendition
neomagic
i740
tdfx
savage
cirrus
vmware
tseng
trident
chips
apm
glide
fbdev
i128
ati
i810
imstt
newport
ark
cyrix
siliconmotion
vesa
vga
v4l
(EE) module ABI minor version (6) is newer than the
server's version (5)
(EE) Failed to load module "nsc" (module requirement
mismatch, 0)
(EE) module ABI minor version (6) is newer than the
server's version (5)
(EE) Failed to load module "dummy" (module requirement
mismatch, 0)
Fatal server error:
XFree86 has found a valid card configuration.
Unfortunately the appropriate data has not been added
to xf86PciInfo.h.
Please forward 'scanpci -v' output to XFree86 support
team.
When reporting a problem related to a server crash,
please send
the full server output, not just the last messages.
This can be found in the log file
"/var/log/XFree86.8.log".
Please report problems to debian-x@lists.debian.org.
Failed to run "X -configure".
=============================
scanpci -v:
pci bus 0x0000 cardnum 0x00 function 0x00: vendor
0x1039 device 0x0650
SiS Device unknown
CardVendor 0x1039 card 0x0650 (SiS, Card unknown)
STATUS 0x2210 COMMAND 0x0007
CLASS 0x06 0x00 0x00 REVISION 0x01
BIST 0x00 HEADER 0x80 LATENCY 0x20 CACHE
0x00
BASE0 0xe8000000 addr 0xe8000000 MEM
pci bus 0x0000 cardnum 0x01 function 0x00: vendor
0x1039 device 0x0001
SiS SG86C201
STATUS 0x0000 COMMAND 0x0107
CLASS 0x06 0x04 0x00 REVISION 0x00
HEADER 0x01 LATENCY 0x40
PRIBUS 0x00 SECBUS 0x01 SUBBUS 0x01 SECLT 0x20
IOBASE 0xc000 IOLIM 0xcfff SECSTATUS 0x2000
NOPREFETCH_MEMBASE 0xec000000 MEMLIM 0xec0fffff
PREFETCH_MEMBASE 0xe0000000 MEMLIM 0xe7ffffff
NO_FAST_B2B NO_SEC_BUS_RST NO_M_ABRT VGA_EN ISA_EN
SERR_EN NO_PERR_EN
pci bus 0x0000 cardnum 0x02 function 0x00: vendor
0x1039 device 0x0008
SiS Device unknown
STATUS 0x0200 COMMAND 0x000f
CLASS 0x06 0x01 0x00 REVISION 0x10
BIST 0x00 HEADER 0x80 LATENCY 0x00 CACHE
0x00
BYTE_0 0x800b0590 BYTE_1 0x00 BYTE_2 0x00
BYTE_3 0x00
pci bus 0x0000 cardnum 0x02 function 0x02: vendor
0x1039 device 0x7001
SiS Device unknown
CardVendor 0x1039 card 0x7001 (SiS, Card unknown)
STATUS 0x0280 COMMAND 0x0007
CLASS 0x0c 0x03 0x10 REVISION 0x07
BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE
0x08
BASE0 0xec100000 addr 0xec100000 MEM
MAX_LAT 0x50 MIN_GNT 0x00 INT_PIN 0x04 INT_LINE
0x09
pci bus 0x0000 cardnum 0x02 function 0x03: vendor
0x1039 device 0x7001
SiS Device unknown
CardVendor 0x1039 card 0x7001 (SiS, Card unknown)
STATUS 0x0280 COMMAND 0x0007
CLASS 0x0c 0x03 0x10 REVISION 0x07
BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE
0x08
BASE0 0xec101000 addr 0xec101000 MEM
MAX_LAT 0x50 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE
0x0b
pci bus 0x0000 cardnum 0x02 function 0x05: vendor
0x1039 device 0x5513
SiS Device unknown
CardVendor 0x1039 card 0x5513 (SiS, Card unknown)
STATUS 0x0000 COMMAND 0x0007
CLASS 0x01 0x01 0x80 REVISION 0xd0
BIST 0x00 HEADER 0x80 LATENCY 0x10 CACHE
0x00
BASE4 0x0000f001 addr 0x0000f000 I/O
BYTE_0 0x8331 BYTE_1 0x00 BYTE_2 0x80721d0
BYTE_3 0xffffffff
pci bus 0x0000 cardnum 0x02 function 0x07: vendor
0x1039 device 0x7012
SiS Device unknown
CardVendor 0x1458 card 0xa002 (Card unknown)
STATUS 0x0290 COMMAND 0x0005
CLASS 0x04 0x01 0x00 REVISION 0xa0
BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE
0x00
BASE0 0x0000d801 addr 0x0000d800 I/O
BASE1 0x0000dc01 addr 0x0000dc00 I/O
MAX_LAT 0x0b MIN_GNT 0x34 INT_PIN 0x03 INT_LINE
0x09
BYTE_0 0x04 BYTE_1 0x00 BYTE_2 0x8072548
BYTE_3 0xffffffff
pci bus 0x0000 cardnum 0x10 function 0x00: vendor
0x10ec device 0x8139
Realtek RTL8139 10/100 Ethernet
CardVendor 0x10ec card 0x8139 (Realtek Generic)
STATUS 0x0290 COMMAND 0x0007
CLASS 0x02 0x00 0x00 REVISION 0x10
BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE
0x00
BASE0 0x0000e001 addr 0x0000e000 I/O
BASE1 0xec102000 addr 0xec102000 MEM
MAX_LAT 0x40 MIN_GNT 0x20 INT_PIN 0x01 INT_LINE
0x0b
pci bus 0x0001 cardnum 0x00 function 0x00: vendor
0x1039 device 0x6325
SiS Device unknown
CardVendor 0x1039 card 0x6325 (SiS, Card unknown)
STATUS 0x02b0 COMMAND 0x0003
CLASS 0x03 0x00 0x00 REVISION 0x00
BIST 0x80 HEADER 0x00 LATENCY 0x00 CACHE
0x00
BASE0 0xe0000008 addr 0xe0000000 MEM
PREFETCHABLE
BASE1 0xec000000 addr 0xec000000 MEM
BASE2 0x0000c001 addr 0x0000c000 I/O
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE
0x05
BYTE_0 0x6015001 BYTE_1 0x00 BYTE_2 0x8072c38
BYTE_3 0xffffffff
=============================
XF86Config-4 file:
Section "Files"
# Multiple FontPath entries are allowed (they are
concatenated together)
FontPath
"/usr/X11R6/lib/X11/fonts/turkishfonts/misc"
FontPath
"/usr/X11R6/lib/X11/fonts/turkishfonts/75dpi"
FontPath
"/usr/X11R6/lib/X11/fonts/turkishfonts/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/CID"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
EndSection
Section "ServerFlags"
#DontZap # disable <Crtl><Alt><BS> (server abort)
AllowMouseOpenFail # allows the server to start up
even if the mouse doesn't work
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_->
(resolution switching)
EndSection
Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "glx" # 3D layer
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "tr"
Option "XkbOptions" ""
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons"
Option "Emulate3Timeout" "50"
EndSection
Section "Monitor"
Identifier "monitor1"
VendorName "Generic"
ModelName "1024x768 @ 60 Hz"
HorizSync 31.5-48.5
VertRefresh 50-70
# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344
480 488 494 563 -hsync -vsync
# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000
576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024
576 578 590 616
EndSection
Section "Device"
Identifier "device1"
VendorName "S3 Inc."
BoardName "S3 Trio64 (generic)"
Driver "s3"
VideoRam 2048
Option "DPMS"
EndSection
Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 16
Subsection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubsection
EndSection
Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
Screen "screen1"
EndSection
__________________________________________________
Do you Yahoo!?
Yahoo! Tax Center - File online, calculators, forms, and more
http://tax.yahoo.com
Reply to: