Re: Apple Multiscan 1705 - writing Xf86Config
According to Michel Dänzer on Thu, Feb 14, 2002 at 03:19:44AM +0100:
> On Don, 2002-02-14 at 01:55, Eric Smith wrote:
> > Is this an appropriate forum to ask for assistance in writing
> > modelines for my specific hardware above?
>
> Actually it's not, anyway with XFree86 4.x, you normally don't have to
> worry about modelines. Knowing the frequency ranges the monitor can
> handle should be enough, or is there a specific problem?
Seems 4.x aint compatible with my display card, so using 3.3.6a
and cannot get a resolution higher than 640 x 480 - see output below.
If I try to run the fbdev server, I get a compaint that the
/dev/... does not exist.
Cannot achieve a higher resolution under windows either though.
(If there is a more appropriate forum for me to go with this, then please advise.)
XFree86 Version 3.3.6a / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: xx November 2000
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.4.13 i686 [ELF]
Configured drivers:
S3: accelerated server for S3 graphics adaptors (Patchlevel 0)
newmmio, mmio_928, s3_generic
(using VT number 9)
F86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keymap: "xfree86(us)" (overrides other XKB settings)
(**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200
(**) Mouse: buttons: 3, Chorded middle button
(**) S3: Graphics device ID: "g"
(**) S3: Monitor ID: "g"
(--) S3: Mode "800x600" needs hsync freq of 35.16 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 35.52 kHz. Deleted.
(--) S3: Mode "640x400" needs hsync freq of 37.86 kHz. Deleted.
(--) S3: Mode "640x480" needs hsync freq of 36.46 kHz. Deleted.
(--) S3: Mode "640x480" needs hsync freq of 37.50 kHz. Deleted.
(--) S3: Mode "800x600" needs hsync freq of 37.88 kHz. Deleted.
(--) S3: Mode "640x480" needs hsync freq of 43.27 kHz. Deleted.
(--) S3: Mode "1152x864" needs hsync freq of 43.92 kHz. Deleted.
(--) S3: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 48.36 kHz. Deleted.
(--) S3: Mode "640x480" needs hsync freq of 53.01 kHz. Deleted.
(--) S3: Mode "1152x864" needs hsync freq of 53.51 kHz. Deleted.
(--) S3: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted.
(--) S3: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) S3: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
(--) S3: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) S3: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) S3: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) S3: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) S3: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(--) S3: Mode "512x384" needs vert refresh rate of 77.97 Hz. Deleted.
(--) S3: Mode "512x384" needs vert refresh rate of 85.09 Hz. Deleted.
(--) S3: Mode "320x240" needs hsync freq of 39.38 kHz. Deleted.
(--) S3: Mode "400x300" needs hsync freq of 35.16 kHz. Deleted.
(--) S3: Mode "400x300" needs hsync freq of 37.88 kHz. Deleted.
(--) S3: Mode "400x300" needs hsync freq of 48.08 kHz. Deleted.
(--) S3: Mode "480x300" needs hsync freq of 35.16 kHz. Deleted.
(--) S3: Mode "480x300" needs hsync freq of 37.80 kHz. Deleted.
(--) S3: Mode "480x300" needs hsync freq of 39.56 kHz. Deleted.
(--) S3: Mode "480x300" needs hsync freq of 48.00 kHz. Deleted.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/75dpi/"
(--) S3: PCI: Trio32/64 rev 0, Linear FB @ 0xff000000
(--) S3: chipset: Trio64 rev. 20
(--) S3: chipset driver: mmio_928
(--) S3: card type: PCI
(--) S3: Diamond Stealth BIOS found
(--) S3: videoram: 1024k
(--) S3: Ramdac type: s3_trio64
(--) S3: Ramdac speed: 135 MHz
(--) S3: Using Trio32/64 programmable clock (MCLK 59.957 MHz)
(--) S3: Maximum allowed dot-clock: 135.000 MHz
(**) S3: Mode "640x480": mode clock = 25.175
(--) S3: There is no mode definition named "800x600"
(--) S3: Removing mode "800x600" from list of valid modes.
(--) S3: Using 6 bits per RGB value
(--) S3: Virtual resolution set to 640x480
(--) S3: Local bus LAW is 0xFF000000
(--) S3: Using a banksize of 1024k, line width of 640
(--) S3: Using a single 64x64 area at (576,482) for expanding pixmaps
(--) S3: Using 8 planes of 640x1092 at (0,546) aligned 8 as font cache
System: `/usr/X11R6/lib/X11/xkb/xkbcomp -w 1 -R/usr/X11R6/lib/X11/xkb -xkm -m us -em1 "The XKEYBOARD keymap compiler (xkbcomp) reports:" -emp "> " -eml "Errors from xkbcomp are not fatal to the X server" keymap/xfree86 /var/tmp/xfree86.xkm'
--
Eric Smith
Reply to: