XFree 4.1-6 crashes on Notebook with ati Grafik card
Hello everybody.
Please excuse me, if I'm wrong here with my problems here and tell me
were to go.
I recently upgraded my woody, and XFree 4.1 fell out of the apt-get.
So far I had no problems with stability, but now I have...
The XFREE-Packages I have now installed have the Version-Tags:
ii xserver-common 4.1.0-6 files and utilities common to all X servers
ii xserver-xfree8 4.1.0-6 the XFree86 X server
The previous ones were:
xserver-xfree86_4.0.3-4_i386.deb
I'll put more about my machine in the first appendix,
The stuff gdb told me about the crash in the second one.
After i swapped the /usr/X11R6/lib/modules/drivers/ati* with the ones
from the xfree4.0.3 package, the system ran stable again.
If I can provide you more information, please tell me how.
If there's a way to make gdb more informative, please send
me binaries. (is there a monolitic way for XFree 4?)
Willi
torres:~# lspci
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge
(rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev
03)
00:04.0 CardBus bridge: Texas Instruments PCI1225 (rev 01)
00:04.1 CardBus bridge: Texas Instruments PCI1225 (rev 01)
00:07.0 Bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 03)
00:08.0 Multimedia audio controller: ESS Technology ES1978 Maestro 2E (rev
10)
01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage P/M Mobility
AGP 2x (rev 64)
torres:~# cat /proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev
3).
Master Capable. Latency=64.
Prefetchable 32 bit memory at 0xe0000000 [0xe3ffffff].
Bus 0, device 1, function 0:
PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 3).
Master Capable. Latency=128. Min Gnt=140.
Bus 0, device 4, function 0:
CardBus bridge: Texas Instruments PCI1225 (rev 1).
IRQ 11.
Master Capable. Latency=168. Min Gnt=192.Max Lat=5.
Non-prefetchable 32 bit memory at 0x10000000 [0x10000fff].
Bus 0, device 4, function 1:
CardBus bridge: Texas Instruments PCI1225 (#2) (rev 1).
IRQ 11.
Master Capable. Latency=168. Min Gnt=192.Max Lat=5.
Non-prefetchable 32 bit memory at 0x10001000 [0x10001fff].
Bus 0, device 7, function 0:
Bridge: Intel Corporation 82371AB PIIX4 ISA (rev 2).
Bus 0, device 7, function 1:
IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 1).
Master Capable. Latency=64.
I/O at 0x1080 [0x108f].
Bus 0, device 7, function 2:
USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 1).
IRQ 5.
Master Capable. Latency=64.
I/O at 0x1060 [0x107f].
Bus 0, device 7, function 3:
Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 3).
IRQ 9.
Bus 0, device 8, function 0:
Multimedia audio controller: ESS Technology ES1978 Maestro 2E (rev 16).
IRQ 5.
Master Capable. Latency=64. Min Gnt=2.Max Lat=24.
I/O at 0x1400 [0x14ff].
Bus 1, device 0, function 0:
VGA compatible controller: ATI Technologies Inc 3D Rage P/M Mobility AGP
2x (rev 100).
IRQ 11.
Master Capable. Latency=66. Min Gnt=8.
Non-prefetchable 32 bit memory at 0xfd000000 [0xfdffffff].
I/O at 0x2000 [0x20ff].
Non-prefetchable 32 bit memory at 0xfc000000 [0xfc000fff].
willi@torres:~$ uname -a
Linux torres 2.4.10 #1 Don Sep 27 10:15:25 CEST 2001 i686 unknown
torres:~# gdb `which X`
(no debugging symbols found)...(gdb) run -ac
Starting program: /usr/bin/X11/X -ac
(no debugging symbols found)...(no debugging symbols found)...
Program received signal SIGTRAP, Trace/breakpoint trap.
0x40001f30 in _start () from /lib/ld-linux.so.2
(gdb) cont
Continuing.
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)
XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: xx August 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.7 i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Sep 27 10:53:30 2001
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "Compaq QVision 200"
(**) | |-->Device "ATI Rage Mobility"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "ArtPad"
(**) |-->Input Device "eraser"
(**) |-->Input Device "Keyboard1"
(WW) Option "XkbCompat" requires an string value
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc105"
(**) XKB: layout: "dvorak"
(WW) The directory "/usr/X11R6/lib/X11/fonts/SUN/F3bitmaps/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/SUN/dtfonts/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/Type1/more" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/Type1/more2" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/Type1/corel" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/SUN/F3bitmaps/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/SUN/dtfonts" does not exist.
Entry deleted from font path.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11
R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/misc/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 8
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(1:0:0) ATI Mach64 LM rev 100, Mem @ 0xfd000000/24, 0xfc000000/12, I/O @ 0x2000/8
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.1.9
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/input/wacom_drv.o
(II) Module wacom: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Wacom driver level: 23 $
(II) Loading /usr/X11R6/lib/modules/drivers/apm_drv.o
(EE) LoadModule: Module apm_drv does not have a apm_drvModuleData data object.
(II) Unloading /usr/X11R6/lib/modules/drivers/apm_drv.o
(EE) Failed to load module "apm_drv" (invalid module, 0)
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 6.3.6
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Wacom driver level: 23 $
(II) Loading /usr/X11R6/lib/modules/drivers/apm_drv.o
(EE) LoadModule: Module apm_drv does not have a apm_drvModuleData data object.
(II) Unloading /usr/X11R6/lib/modules/drivers/apm_drv.o
(EE) Failed to load module "apm_drv" (invalid module, 0)
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 6.3.6
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Wacom driver level: 23 $
(II) ATI: ATI driver (version 6.3.6) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (PCI),
ATI Rage 128 Pro PF (AGP), ATI Rage 128 Mobility LE (PCI),
ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE (AGP)
(II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o
(II) Module atimisc: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 6.3.6
(==) ATI(0): Chipset: "ati".
(**) ATI(0): Depth 16, (--) framebuffer bpp 16
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) ATI(0): Primary V_BIOS segment is: 0xc000
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) ATI(0): VESA BIOS detected
(II) ATI(0): VESA VBE DDC supported
(--) ATI(0): ATI 3D Rage Mobility graphics controller detected.
(--) ATI(0): Chip type 4C4D "LM", version 4, foundry TSMC, class 0, revision 0x01.
(--) ATI(0): AGP bus interface detected; block I/O base is 0x2000.
(--) ATI(0): ATI Mach64 adapter detected.
(--) ATI(0): Internal RAMDAC (subtype 1) detected.
(==) ATI(0): RGB weight 565
(==) ATI(0): Default visual is TrueColor
(==) ATI(0): Using gamma correction (1.0, 1.0, 1.0)
(II) ATI(0): Using Mach64 accelerator CRTC.
(WW) ATI(0): Inconsistent panel horizontal dimension: 1400 and 1401.
(--) ATI(0): 1400x1050 panel (ID 11) detected.
(--) ATI(0): Panel model Samsung LTN150P1-L01.
(--) ATI(0): Panel clock is 107.859 MHz.
(II) ATI(0): Using digital flat panel interface.
(II) ATI(0): Storing hardware cursor image at 0xFD7FFC00.
(II) ATI(0): Using 8 MB linear aperture at 0xFD000000.
(!!) ATI(0): Virtual resolutions will be limited to 8191 kB
due to linear aperture size and/or placement of hardware cursor image area.
(II) ATI(0): Using Block 0 MMIO aperture at 0xFC000400.
(II) ATI(0): Using Block 1 MMIO aperture at 0xFC000000.
(==) ATI(0): Write-combining range (0xfd000000,0x800000)
(II) ATI(0): MMIO write caching enabled.
(--) ATI(0): 8192 kB of SGRAM (1:1) detected (using 8191 kB).
(WW) ATI(0): Cannot shadow an accelerated frame buffer.
(--) ATI(0): Internal programmable clock generator detected.
(--) ATI(0): Reference clock 29.500 MHz.
(II) ATI(0): Maximum clock: 230.00 MHz
(II) ATI(0): Not using mode "1600x1200" (exceeds panel dimensions)
(II) ATI(0): Not using mode "1600x1200" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(--) ATI(0): Virtual size is 1400x1050 (pitch 1408)
(**) ATI(0): Mode "1400x1050": 107.9 MHz, 67.4 kHz, 62.0 Hz
(**) ATI(0): Mode "1280x960": 107.9 MHz, 56.9 kHz, 52.7 Hz
(**) ATI(0): Mode "1152x864": 107.9 MHz, 55.7 kHz, 51.4 Hz
(**) ATI(0): Mode "800x600": 107.9 MHz, 56.6 kHz, 52.5 Hz
(**) ATI(0): Mode "512x384D": 107.9 MHz, 59.7 kHz, 55.5 Hz (D)
(**) ATI(0): Mode "640x480": 107.9 MHz, 56.9 kHz, 52.3 Hz
(==) ATI(0): DPI set to (75, 75)
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(==) ATI(0): Write-combining range (0xfd000000,0x800000)
(II) ATI(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
13 256x256 slots
5 512x512 slots
(==) ATI(0): Backing store disabled
(==) ATI(0): Silken mouse enabled
(**) Mouse1: Protocol: "microsoft"
(**) Mouse1: Core Pointer
(==) Mouse1: Buttons: 3
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Mouse1: BaudRate: 1200
(**) Mouse1: Resolution: 200
(**) ArtPad: always reports core events
(**) ArtPad serial device is /dev/tts/0
(**) ArtPad is in absolute mode
(**) ArtPad: max x = 6150
(**) ArtPad: max x = 4550
(**) ArtPad: resol x = 1270
(**) ArtPad: serial speed 9600
(**) eraser: always reports core events
(**) eraser serial device is /dev/tts/0
(**) eraser is in absolute mode
(**) eraser: max x = 6150
(**) eraser: max x = 4550
(**) eraser: resol x = 1270
(**) eraser: serial speed 9600
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(II) XINPUT: Adding extended input device "ArtPad" (type: Wacom Stylus)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(==) Wacom tablet model : KT-0405-R00 V1.3-6
(==) Wacom IV tablet maximum X=6150 maximum Y=4550 X resolution=1270 Y resolution=1270 suppress=4
(==) Wacom tablet top X=0 top Y=0 bottom X=6150 bottom Y=4550
(==) Wacom tablet top X=0 top Y=0 bottom X=6150 bottom Y=4550
Program received signal SIGSEGV, Segmentation fault.
0x857778f in ?? ()
(gdb) bt
#0 0x857778f in ?? ()
#1 0x857dafa in ?? ()
#2 0x857e0e0 in ?? ()
#3 0x857e4a1 in ?? ()
#4 0x857e568 in ?? ()
#5 0x832e65e in ?? ()
#6 0x80b0abe in ?? ()
#7 0x80ae9c6 in ?? ()
#8 0x80beb1b in ?? ()
#9 0x4007764f in vfprintf () from /lib/libc.so.6
Reply to: