Re: Need current Debian _specific_ HOWTO for vnstat

[Greg Wooledge <greg@wooledge.org>]

On Thu, Oct 16, 2025 at 12:44:18 -0500, Richard Owlett wrote:
> On my machine I get
> 
> > richard@debian12:~$ ip link show
> > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
> >     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> > 2: eno1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN mode DEFAULT group default qlen 1000
> >     link/ether 5c:26:0a:35:91:9f brd ff:ff:ff:ff:ff:ff
> >     altname enp0s25
> > 3: wlp2s0b1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DORMANT group default qlen 1000
> >     link/ether e6:ae:b5:94:25:ed brd ff:ff:ff:ff:ff:ff permaddr 5c:ac:4c:15:2a:30
> > 74: enxce36b5aed86e: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN mode DEFAULT group default qlen 1000
> >     link/ether ce:36:b5:ae:d8:6e brd ff:ff:ff:ff:ff:ff
> 
> I don't see any "default via…" !

That would be in "ip route".

hobbit:~$ ip route
default via 192.168.1.1 dev eno1 
192.168.1.0/24 dev eno1 proto kernel scope link src 192.168.1.105