Re: smartctl cannot access my storage, need syntax help
On 1/20/24 21:48, gene heskett wrote:
New -x version for this SSD attached
> SMART Attributes Data Structure revision number: 1
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
>   5 Reallocated_Sector_Ct   PO--CK   094   094   010    -    64
> 183 Runtime_Bad_Block       PO--C-   094   094   010    -    64
> 187 Uncorrectable_Error_Cnt -O--CK   099   099   000    -    392
> 195 ECC_Error_Rate          -O-RC-   199   199   000    -    392
> 199 CRC_Error_Count         -OSRCK   099   099   000    -    2
Those attributes are worrisome.  Especially Reallocated_Sector_Ct and 
Runtime_Bad_Block -- I am confident those are inside the SSD.
>   9 Power_On_Hours          -O--CK   095   095   000    -    21194
That is equivalent to 10.2 years at 40 hours/week.
> 241 Total_LBAs_Written      -O--CK   099   099   000    -    38429262625
TBW specification for 1 TB drive is 600TB.  You are at 19.7.
> Error 466 [1] occurred at disk power-on lifetime: 21078 hours (878 
days + 6 hours)
>   When the command that caused the error occurred, the device was 
active or idle.
>
>   After command completion occurred, registers were:
>   ER -- ST COUNT  LBA_48  LH LM LL DV DC
>   -- -- -- == -- == == == -- -- -- -- --
>   40 -- 51 00 40 00 00 1b a4 0d 18 40 00  Error: WP at LBA = 
0x1ba40d18 = 463736088
>
>   Commands leading to the command that caused the error were:
>   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time 
Command/Feature_Name
>   -- == -- == -- == == == -- -- -- -- --  --------------- 
--------------------
>   61 00 08 00 40 00 00 1b a4 0d 18 40 08  1d+03:35:20.430  WRITE 
FPDMA QUEUED
>   60 0a 00 00 38 00 00 70 f1 a4 00 40 07  1d+03:35:20.430  READ FPDMA 
QUEUED
>   60 07 80 00 30 00 00 70 f1 3c 80 40 06  1d+03:35:20.430  READ FPDMA 
QUEUED
>   61 00 28 00 28 00 00 1b a4 0d 38 40 05  1d+03:35:20.430  WRITE 
FPDMA QUEUED
>   47 00 00 00 01 00 00 00 00 00 00 40 02  1d+03:35:20.430  READ LOG 
DMA EXT
>
> Error 465 [0] occurred at disk power-on lifetime: 21078 hours (878 
days + 6 hours)
> ...
> Error 464 [3] occurred at disk power-on lifetime: 21078 hours (878 
days + 6 hours)
> ...
> Error 463 [2] occurred at disk power-on lifetime: 21078 hours (878 
days + 6 hours)
I am still uncertain if those are internal SSD errors or SATA errors. 
Please check if you see matching errors in dmesg(1).
David
Reply to:
- References:
- Re: smartctl cannot access my storage, need syntax help
- From: Curt <curty@free.fr>
 
 
- Re: smartctl cannot access my storage, need syntax help
- From: "Thomas Schmitt" <scdbackup@gmx.net>
 
 
- Re: smartctl cannot access my storage, need syntax help
- From: gene heskett <gheskett@shentel.net>
 
 
- Re: smartctl cannot access my storage, need syntax help
- From: David Christensen <dpchrist@holgerdanske.com>
 
 
- Re: smartctl cannot access my storage, need syntax help
- From: gene heskett <gheskett@shentel.net>
 
 
- Re: smartctl cannot access my storage, need syntax help
- From: David Christensen <dpchrist@holgerdanske.com>
 
 
- Re: smartctl cannot access my storage, need syntax help
- From: gene heskett <gheskett@shentel.net>
 
 
- Re: smartctl cannot access my storage, need syntax help
- From: David Christensen <dpchrist@holgerdanske.com>
 
 
- Re: smartctl cannot access my storage, need syntax help
- From: gene heskett <gheskett@shentel.net>
 
 
- Re: smartctl cannot access my storage, need syntax help
- From: David Christensen <dpchrist@holgerdanske.com>
 
 
- Re: smartctl cannot access my storage, need syntax help
- From: gene heskett <gheskett@shentel.net>
 
 
- Re: smartctl cannot access my storage, need syntax help
- From: David Christensen <dpchrist@holgerdanske.com>
 
 
- Re: smartctl cannot access my storage, need syntax help
- From: gene heskett <gheskett@shentel.net>
 
 
- Re: smartctl cannot access my storage, need syntax help
- From: Max Nikulin <manikulin@gmail.com>
 
 
- Re: smartctl cannot access my storage, need syntax help
- From: gene heskett <gheskett@shentel.net>
 
 
- Re: smartctl cannot access my storage, need syntax help
- From: Max Nikulin <manikulin@gmail.com>
 
 
- Re: smartctl cannot access my storage, need syntax help
- From: gene heskett <gheskett@shentel.net>