$ sudo lspci | grep --ignore-case Wireless
02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless
Network Adapter (rev 31)
$
$ sudo lshw -class network
*-network DISABLED
description: Ethernet interface
product: RTL810xE PCI Express Fast Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:01:00.0
logical name: enp1s0
version: 07
serial: c0:3e:ba:26:aa:93
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd cap_list ethernet physical
configuration: broadcast=yes driver=r8169
driverversion=5.10.0-18-amd64 latency=0 link=no multicast=yes
resources: irq:16 ioport:3000(size=256)
memory:91400000-91400fff memory:91200000-91203fff
*-network
description: Network controller
product: QCA9377 802.11ac Wireless Network Adapter
vendor: Qualcomm Atheros
physical id: 0
bus info: pci@0000:02:00.0
version: 31
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=ath10k_pci latency=0
resources: irq:127 memory:91000000-911fffff
$
The difference between the wired Ethernet controller and the Wireless
Network Adapter are obvious, but what is the "logical name" of the
internal wireless card, which as I read:
Just run `ip link` or `ip address` and it will show you the name.
https://forums.debian.net/viewtopic.php?t=136212
is supported in the kernel since version 4.4?
How can you go: "ip link set dev <logical name for wireless adapter>
up" when I don't even see what the logical name is?