confused, seems to be my normal state

[Gene Heskett <gheskett@shentel.net>]

Greetings to all debian puzzle solvers incorporated;

I once wrote the "debian-10.0.0-arm64-netinst.iso" to an u-sd card, which 
booted and did a net-install on an rpi-3b but my user software, linuxcnc 
was built for armhf and would not run.

I'm capable of building that from src, but was not able to satisfy all 
its dependencies, so gave it up. Apparently the arm64 is not capable of 
supporting a 32 bit program.

This morning I pull a copy of "debian-10.1.0-arm64-netinst.iso" to see if 
it worked any better, but it makes no attempt to boot when plugged into 
the pi-3b.  That card, plugged back into a reader, looks like this:

/dev/sde1 /media/sde1 iso9660 ro,relatime 0 0
/dev/sde2 /media/sde2 vfat 
rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro 
0 0

first partition is iso9660 ? Don't recall seeing that before.

I also have that in armhf, so I'm about to rewrite that card with it.

Was the first install a fluke, or was something changed between 10.0 and 
10.1 that would explain the failure?

Thanks all.

Cheers, Gene Heskett
-- 
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
If we desire respect for the law, we must first make the law respectable.
 - Louis D. Brandeis
Genes Web page <http://geneslinuxbox.net:6309/gene>