Hi all,
I'm working on SONiC project management vrf function under debian with kernel 4.3.
This is my OS:
# uname -a
Linux dut211 4.9.0-7-amd64 #1 SMP Debian 4.9.110-3+deb9u2 (2015-12-19) x86_64 GNU/Linux
This is SONiC project management vrf function:
https://www.youtube.com/watch?v=uAHmZKEdqDE&feature=youtu.be
Now I have to rewrite /etc/network/interfaces to implement this function, but I got errors, so I want to know if there is demo about how to define VRF interface and implement VRF function in /etc/network/interfaces.
As I follow your man file, I don't know how to do, and gots errors.
This is my try on this feature, rewrite /etc/network/interfaces like this
iface eth0 inet static
address 172.18.8.211
netmask 255.255.255.0
########## management network policy routing rules
# management port up rules
up ip -4 link add mgmtvrf type vrf table 10
up ip -4 link set dev mgmtvrf up
up ip -4 link set dev eth0 master mgmtvrf
up ip -4 route add default via 172.18.8.1 dev eth0 table 10
up ip -4 route add 172.18.8.0/24 dev eth0 table 10
up ip -4 rule add from 172.18.8.211/32 table 10
post-up sysctl -w net.ipv4.tcp_l3mdev_accept=1
# management port down rules
down ip -4 route delete default via 172.18.8.1 dev eth0 table 10
down ip -4 route delete 172.18.8.0/24 dev eth0 table 10
down ip -4 rule delete from 172.18.8.211/32 table 10
down ip -4 link set dev eth0 nomaster
This is errors I got
Dec 29 02:38:48 dut211 ifup[8690]: RTNETLINK answers: File exists
Dec 29 02:38:48 dut211 ifup[8690]: ifup: failed to bring up eth0
Dec 29 02:38:48 dut211 systemd[1]: networking.service: Main process exited, code=exited, status=1/FAILURE
Dec 29 02:38:48 dut211 systemd[1]: Failed to start Raise network interfaces.
-- Subject: Unit networking.service has failed
-- Defined-By: systemd
-- Support: https://www.debian.org/support
--
-- Unit networking.service has failed.
--
-- The result is failed.
Dec 29 02:38:48 dut211 systemd[1]: networking.service: Unit entered failed state.
Dec 29 02:38:48 dut211 systemd[1]: networking.service: Failed with result 'exit-code’.
Thank you.