On 07/22/2018 10:39 AM, john doe wrote:
On
7/22/2018 4:08 PM, Dave wrote:
On 07/22/2018 09:17 AM, john doe wrote:
On 7/22/2018 2:57 PM, Dave wrote:
On 07/22/2018 02:14 AM, john doe wrote:
On 7/21/2018 11:22 PM, Dave wrote:
On 07/21/2018 11:38 AM, john doe wrote:
On 7/21/2018 3:46 PM, Dave
wrote:
On 07/21/2018 08:42 AM, mick crane wrote:
On 2018-07-21 13:00, john
doe wrote:
On 7/21/2018 11:21 AM,
mick crane wrote:
On 2018-07-21 09:56,
mick crane wrote:
On 2018-07-21 09:39,
john doe wrote:
my interfaces file
is identical and apache starts OK so it
is probably something else.
in /lib/systemd/system/apache2.target
do you have the "after" bit
1 [Unit]
2 Description=The Apache HTTP
Server
3 After=network.target
remote-fs.target nss-lookup.target
Or looking if
"NetworkManager-wait-online.service" is
enabled.
For systemd-networkd that is :
"systemd-networkd-wait-online.service".
https://www.freedesktop.org/wiki/Software/systemd/NetworkTarget/
If your '/etc/network/interfaces' file is
empty with the exception of
the 'lo' interface, your interfaces are
probably handled by an other
"program" and you need to determine which
"program" is responsible for
your interfaces.
I'm quite cheerful as everything seems to be
working but it wouldn't
hurt to find out and may assist OP.
Appologies for the confusion, I read your answer
and think I could add
to it but was not in anycase directed towards
you! :)
Yes, my comment was for the OP (taking into
account other answers he
has sent to the list).
looking at links you posted if I was OP I would
probably try adding
After=network-online.target
Wants=network-online.target
to /lib/systemd/system/apache2.target
and see if apache starts at boot
mick
hello - my Deb 9.4 / Apache 2.4 has no file called
apache2.target, however there is a
/lib/systemd/system/apache2.service file:: the
contents as follows
Description=The Apache HTTP Server
After=network.target remote-fs.target
nss-lookup.target
[Service]
Type=forking
Environment=APACHE_STARTED_BY_SYSTEMD=true
ExecStart=/usr/sbin/apachectl start
ExecStop=/usr/sbin/apachectl stop
ExecReload=/usr/sbin/apachectl graceful
PrivateTmp=true
Restart=on-abort
[Install]
WantedBy=multi-user.target
root@culser:/lib/systemd/system#
Ok -- lets try:
Undo any changes in '/etc/network/interfaces'.
As root:
$ mkdir -p /etc/systemd/apache2.d
$ printf "%s\n%s\n" "After=network-online.target"
"Wants=network-online.target" >
/etc/systemd/apache2.d/boot-args.conf
Then try:
$ systemctl enable NetworkManager-wait-online
$ systemctl reboot
If it is not working:
$ systemctl disable NetworkManager-wait-online.service
$ systemctl enable
systemd-networkd-wait-online.service
$ systemctl reboot
Note that the lines starting with a '$' are commands
and should be entered on one line.
https://www.freedesktop.org/wiki/Software/systemd/NetworkTarget/
https://www.freedesktop.org/software/systemd/man/systemd.unit.html
I tried both those options, apache2 does not start at
boot.
the contents of /boot-args.conf is as follows:
After=network-online.target
Wants=network-online.target
To check if apache is running after boot i check the
/var/run/apache2.pid file is present. it is not present.
I also use ps -e | grep apache and nothing is returned.
After a reboot what output do you get:
$ systemctl status apache2
after boot or reboot the systemctl cmd prints the following:
● apache2.service - The Apache HTTP Server
Loaded: loaded (/lib/systemd/system/apache2.service;
enabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Sun 2018-07-22
08:55:17 EDT; 51s ago
Process: 588 ExecStart=/usr/sbin/apachectl start
(code=exited, status=1/FAILURE)
Jul 22 08:55:17 culser systemd[1]: Starting The Apache HTTP
Server...
Jul 22 08:55:17 culser apachectl[588]: (99)Cannot assign
requested address: AH00072: make_sock: coul
Jul 22 08:55:17 culser apachectl[588]: no listening sockets
available, shutting down
Jul 22 08:55:17 culser apachectl[588]: AH00015: Unable to
open logs
Jul 22 08:55:17 culser apachectl[588]: Action 'start'
failed.
Jul 22 08:55:17 culser apachectl[588]: The Apache error log
may have more information.
Jul 22 08:55:17 culser systemd[1]: apache2.service: Control
process exited, code=exited status=1
Jul 22 08:55:17 culser systemd[1]: Failed to start The
Apache HTTP Server.
Jul 22 08:55:17 culser systemd[1]: apache2.service: Unit
entered failed state.
Jul 22 08:55:17 culser systemd[1]: apache2.service: Failed
with result 'exit-code'.
Is it properly starting if you do?:
$ systemctl start apache2
$/usr/sbin/apachectl start
If you get any errors it is most likely that the issue lies in
Apache's configuration.
John,
After boot - systemctl start apache2, gets no errors.
ps -e shows apache2 is running.
/var/run/apache.pid is present.
systemctl status apache2 produces the following:
● apache2.service - The Apache HTTP Server
Loaded: loaded (/lib/systemd/system/apache2.service;
enabled; vendor preset: enabled)
Active: active (running) since Sun 2018-07-22 10:02:57 EDT;
47s ago
Process: 1518 ExecStart=/usr/sbin/apachectl start
(code=exited, status=0/SUCCESS)
Main PID: 1522 (apache2)
Tasks: 6 (limit: 4915)
CGroup: /system.slice/apache2.service
├─1522 /usr/sbin/apache2 -k start
├─1523 /usr/sbin/apache2 -k start
├─1524 /usr/sbin/apache2 -k start
├─1525 /usr/sbin/apache2 -k start
├─1526 /usr/sbin/apache2 -k start
└─1527 /usr/sbin/apache2 -k start
Jul 22 10:02:57 culser systemd[1]: Starting The Apache HTTP
Server...
Jul 22 10:02:57 culser systemd[1]: Started The Apache HTTP
Server.
I am still baffled as to why apache2 will not start
automatically when booting.
I can run apache2 -k start/restart systemctl start apache2
manually after boot, but i may forget to do this. many
installations such as php, mysql depend on seeing the
apache2.pid file.
A poorly and temporary work around could be to add in
'/etc/rc.local' the command:
$ systemctl restart apache2
What is the output of:
$ systemctl status systemd-networkd
$ systemctl status NetworkManager
In the apache configuration, as pointed out by others on this
list, you use some options to bind to a specific address.
It would be interesting to remove those options and see how it
goes; that is clearly the issue at hand.
Some hints (look at what the command does and the inplication of
executing that command):
- $ dpkg-reconfigure apache2
- Understanding what is configuring your interfaces (which "prg")
is paramount.
Hopefully others on the list will jump in because I'm running out
of ideas.
the output of:
systemctl status systemd-networkd
● systemd-networkd.service - Network Service
Loaded: loaded (/lib/systemd/system/systemd-networkd.service;
disabled; vendor preset: enabled)
Active: inactive (dead)
Docs: man:systemd-networkd.service(8)
The output of:
systemctl status NetworkManager
● NetworkManager.service - Network Manager
Loaded: loaded (/lib/systemd/system/NetworkManager.service;
enabled; vendor preset: enabled)
Active: active (running) since Sun 2018-07-22 10:42:56 EDT;
2min 51s ago
Docs: man:NetworkManager(8)
Main PID: 574 (NetworkManager)
Tasks: 4 (limit: 4915)
CGroup: /system.slice/NetworkManager.service
├─574 /usr/sbin/NetworkManager --no-daemon
└─818 /sbin/dhclient -d -q -sf
/usr/lib/NetworkManager/nm-dhcp-helper -pf /var/run/dhclie
Jul 22 10:42:59 culser NetworkManager[574]: <info>
[1532270579.0341] dhcp4 (enp5s0): domain name
Jul 22 10:42:59 culser NetworkManager[574]: <info>
[1532270579.0341] dhcp4 (enp5s0): state changed
Jul 22 10:42:59 culser NetworkManager[574]: <info>
[1532270579.0359] device (enp5s0): state change:
Jul 22 10:42:59 culser NetworkManager[574]: <info>
[1532270579.0372] device (enp5s0): state change:
Jul 22 10:42:59 culser NetworkManager[574]: <info>
[1532270579.0377] device (enp5s0): state change:
Jul 22 10:42:59 culser NetworkManager[574]: <info>
[1532270579.0378] manager: NetworkManager state
Jul 22 10:42:59 culser NetworkManager[574]: <info>
[1532270579.0397] manager: NetworkManager state
Jul 22 10:42:59 culser NetworkManager[574]: <info>
[1532270579.0398] policy: set 'Wired connection
Jul 22 10:42:59 culser NetworkManager[574]: <info>
[1532270579.0418] device (enp5s0): Activation: s
Jul 22 10:43:03 culser NetworkManager[574]: <info>
[1532270583.9253] manager: startup complete
|