Re: Re (2): MTI camera and Hauppauge PVR-150 framegrabber.
On Thu, Mar 09, 2017 at 06:10:44PM -0800, peter@easthope.ca wrote:
> * From: Dan Ritter
> > I would start with making sure the cable to the camera is good,
>
> Tried three different coax cables. All give essentially the window
> illustrated in http://easthope.ca/MTItoPVR150screen.jpg . Bright
> strip at the top; black below.
Coax?
The coax connector on the PVR150 expects to be connecting a CATV
signal. Is your camera sending that? If so, which channel?
You'll need to set the PVR150's tuner to match.
You should also have inputs for RCA composite and SVideo Y/C,
which don't need to be tuned.
-dsr-
Reply to: