Unstable WiFi
Hello list,
I'm running Debian 9, and I'm having issues with WiFi being occasionally
unstable. It will run just fine for a while, but sometimes it will
suddenly fail.
/etc/network/interfaces:
> allow-hotplug wlo1
> iface wlo1 inet manual
> wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf
>
> # default wireless interface
> iface default inet dhcp
> openvpn-client chaos
>
> # home
> iface home inet static
> address 192.168.0.2/24
> gateway 192.168.0.1
> openvpn-client chaos
openvpn-client is just a modified version of
/etc/network/if-up.d/openvpn that uses openvpn-client@* units instead of
openvpn@*.
/etc/wpa_supplicant/wpa_supplicant.conf:
> ctrl_interface=DIR=/run/wpa_supplicant GROUP=netdev
> country=KR
then the network blocks, like so:
> network={
> ssid="<snip>"
> psk="<snip>"
> id_str="home"
> }
dmesg:
> [ 6919.168438] rt2x00mmio_regbusy_read() Indirect register access failed: offset=0x0000101c, value=0xffffffff
> [ 6921.211274] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
> [ 6921.410607] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
> [ 6921.813303] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
> [ 6922.016635] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
> [ 6922.215970] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
> [ 6922.419375] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
> [ 6926.407143] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
> [ 6926.610495] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
> [ 6926.857821] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
> [ 6927.061267] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
> [ 6928.433354] ieee80211 phy0: rt2800_wait_csr_ready: Error - Unstable hardware
lspci -vvv:
> 09:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe
> Subsystem: Hewlett-Packard Company Ralink RT3290LE 802.11bgn 1x1 Wi-Fi and Bluetooth 4.0 Combo Adapter
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin A routed to IRQ 16
> Region 0: [virtual] Memory at b2510000 (32-bit, non-prefetchable) [size=64K]
> Capabilities: [40] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
> Capabilities: [50] MSI: Enable- Count=1/32 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [70] Express (v2) Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <128ns, L1 <2us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <64us
> ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported
> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
> LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> Capabilities: [100 v1] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO+ CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr+ BadTLP- BadDLLP+ Rollover+ Timeout+ NonFatalErr+
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> AERCap: First Error Pointer: 0e, GenCap+ CGenEn- ChkCap+ ChkEn-
> Capabilities: [140 v1] Device Serial Number 00-00-ef-dc-2a-9a-48-90
> Kernel driver in use: rt2800pci
> Kernel modules: rt2800pci
Any help in fixing this issue is appreciated.
Thanks.
Reply to: