Re: New motherboard, no network
Hi Tony,
> /etc/udev/70-persistent-net.rules presumably contains the addresses for
> the old motherboard:
>
> # This file was automatically generated by the /lib/udev/write_net_rules
> # program, run by the persistent-net-generator.rules rules file.
> #
> # You can modify it, as long as you keep each rule on a single
> # line, and change only the value of the NAME= key.
>
> # PCI device 0x10ec:0x8169 (r8169)
> SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
> ATTR{address}=="6c:fd:b9:00:6f:76", ATTR{dev_id}=="0x0",
> ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
>
> # PCI device 0x10ec:0x8168 (r8169)
> SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
> ATTR{address}=="bc:ae:c5:29:77:d8", ATTR{dev_id}=="0x0",
> ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
>
> ############################################
>
> So, how do I get the network active?
>
> Thanks,
You have twice the same entry, but one is pointing to eth0 and the second one
is naming the same as eth1. I suppose, one of it is the card from the old pc.
What happens, if you delete the orphaned entry manually?
You can delte it, and rename the last entry to "eth0" (if this is our primary
card). I am sure, you will know, hich MAC is the active one.
Good luck!
Hans
Reply to: