Re: Error when compiling drivers for Asus PEB-10G/57811-1S

[Leslie Rhorer <lrhorer@mygrande.net>]

Backup:/# ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
    link/ether 50:46:5d:65:15:9c brd ff:ff:ff:ff:ff:ff
3: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop portid 086266a14051 state DOWN mode DEFAULT group default qlen 1000
    link/ether 08:62:66:a1:40:51 brd ff:ff:ff:ff:ff:ff


Also:

Backup:/# ifconfig -a
eth0      Link encap:Ethernet  HWaddr 08:62:66:a1:40:51  
          inet addr:192.168.1.91  Bcast:192.168.1.255  Mask:255.255.255.0
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:36 Memory:d3000000-d37fffff 

eth2      Link encap:Ethernet  HWaddr 50:46:5d:65:15:9c  
          inet addr:192.168.1.51  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::5246:5dff:fe65:159c/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:47553 errors:0 dropped:2 overruns:0 frame:0
          TX packets:272930 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:15175818 (14.4 MiB)  TX bytes:392583400 (374.3 MiB)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:52 errors:0 dropped:0 overruns:0 frame:0
          TX packets:52 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:5802 (5.6 KiB)  TX bytes:5802 (5.6 KiB)