Re: network managet and 10.42.0.1/24
https://bhaskerv.blogspot.de/2016/06/network-maanget-changing-default-1042.html
Managed to change the IP to any IP you want to setup and use.
On Wed, Jun 15, 2016 at 3:22 AM, Rodary Jacques <rodaryj@free.fr> wrote:
> I had (and still partly have) the same questions. I know where to find the
> answers, but didn't dare to use them.
>
> --First "nmcli -p connection show --active" will show all your connections.
> Or me the access point has name (not id) "Hotspot" (I don't know if the name
> depends on the device and driver).
>
> --Then "nmcli -p connection show --active Hotspot" gives all the details,
> including 802-11-wireless.ssid (the hostname), 802-11-wireless.mode ap
> (access-point I guess),IP4.ADRESSE[1] (ip = 10.42.0.1/24, gw = 0.0.0.0),
> IP6.ADRESSE[1] (ip = fe80::7e5c:f8ff:fe8e:9473/64, gw = ::) and many other
> infos.
>
> --What I didn't dare to do was to try "nmcli connection edit (or modify)
> Hotspot".
>
> --What I did was to modify my DNS setup. In my master zone I added 10.42.0.1
> as ip-address for my server (which now has 3 addresses, one for the outside,
> from my ISP, one not routable for my local network 192.168.xxx.1, and
> 10.42.0.1, not routable also). In the zone file I added also fixed addresses
> 10.42.0.xxx for some devices (e.g. a printer which has two addresses
> 192.168.10.6 and 10.42.0.6; this allows wifi clients to use this printer. I
> also added a reverse zone 10.42.0.zone.
>
> I can't remember how I managed to exclude the fixed addresses from dhcpd
> range to avoid conflicts but it works. Hope this will help.
>
> Sorry for my English.
>
> Jacques
Reply to: