[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: need help on pptp config



How about using graphical pptp client, like network manager?

Eero

2016-10-07 4:04 GMT+03:00 Li Wei <rootof3@yahoo.com>:
I want to use vpn to bypass censor.
In XP, it's OK
In Linux I have installed and run pptp-linux:

Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
CHAP authentication succeeded
MPPE 128-bit stateless compression enabled
local  IP address 192.168.115.34
remote IP address 192.168.115.1

though I can visit sites not blocked by censor in Iceweasel
I still can't visit sites blocked by censor

below is by the Linux route command:

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
default         www.routerlogin 0.0.0.0         UG    0      0        0 eth0
192.168.1.0     *               255.255.255.0   U     0      0        0 eth0

I think sth. is wrong. Below is by Windows XP route command:
(Note that I have changed the real IP to 103.72.6.116.)

===========================================================================
Interface List
0x1 ........................... MS TCP Loopback interface
0x10003 ...00 19 21 d1 80 74 ...... Realtek RTL8139 Family PCI Fast Ethernet NIC
0x20004 ...00 53 45 00 00 00 ...... WAN (PPP/SLIP) Interface
===========================================================================
===========================================================================
Active Routes:
Network Destination        Netmask          Gateway       Interface  Metric
          0.0.0.0          0.0.0.0      192.168.1.1     192.168.1.3       21
          0.0.0.0          0.0.0.0   192.168.115.34  192.168.115.34       1
     103.72.6.116  255.255.255.255      192.168.1.1     192.168.1.3       20
        127.0.0.0        255.0.0.0        127.0.0.1       127.0.0.1       1
      192.168.1.0    255.255.255.0      192.168.1.3     192.168.1.3       20
      192.168.1.3  255.255.255.255        127.0.0.1       127.0.0.1       20
    192.168.1.255  255.255.255.255      192.168.1.3     192.168.1.3       20
   192.168.115.34  255.255.255.255        127.0.0.1       127.0.0.1       50
  192.168.115.255  255.255.255.255   192.168.115.34  192.168.115.34       50
        224.0.0.0        240.0.0.0      192.168.1.3     192.168.1.3       20
        224.0.0.0        240.0.0.0   192.168.115.34  192.168.115.34       1
  255.255.255.255  255.255.255.255      192.168.1.3     192.168.1.3       1
  255.255.255.255  255.255.255.255   192.168.115.34  192.168.115.34       1
Default Gateway:    192.168.115.34
===========================================================================
Persistent Routes:
  None



What should I do to get iceweasel working?
Thanks in advance!





Reply to: