Re: How to blocks clients between them in subnet
On Monday, July 18, 2016 10:11:24 AM Bonno Bloksma wrote:
> > I've a network 192.168.2.0/24 connected by routing to 192.168.1.0/24
>
> Ok, 2 different network segment and something between that might stop
> unwanted communication
>
> > I'd like blocks clients on 192.168.2.0/24 between then in same network.
> >
> > So, client1 can go to 192.168.1.0/24 but can't see other clients in
> > 192.168.2.0/24. And so for all clients.
>
> This looks to be impossible. The whole idea of having 1 network segment is
> that members can communicate directly over layer 2 without ant
> router/firewall in between.
I don't fool with my network that often, but, if you have less than ~252
clients, I think you could put each on its own network (e.g., 192.168.2.1,
192.168.3.1, 192.168.4.1, ... 192.168.254.1).
Reply to: