Re: (Repeat) Incessant Random Eth Disconnect/Reconnect
> Hi.
>
> On Fri, Jan 29, 2016 at 10:30:26AM +0200, David Baron wrote:
> > Note: The reported dmesg sequence is on start up, not on expiry problem.
> >
> > ~$ sudo ethtool eth0
>
> > Settings for eth0:
> <skip>
>
> > Link partner advertised auto-negotiation: Yes
>
> <skip>
>
> > ~$ sudo ethtool eth1
>
> > Settings for eth1:
> <skip>
>
> > Attempts to set values get "cannot advertise ..."
>
> This is to be expected. You cannot force speed or duplex on a NIC unless
> you turn auto-negotiation off first.
>
> So start with "ethtool -s eth0 autoneg off" first.
>
> And you *did* try using a different cable, do you?
>
> Reco
Cable was tried.
I have set autoneg off, see what happens.
How do I make such a setting persistant?
Reply to: