Hard Drive Issues - smartmontools
Hello, folks!
Please help me save my old Sony VAIO desktop system.
I have two very old Sony VAIO systems, one desktop and one
notebook. They have PATA drives. I run Debian testing (updated
every day) on them. They've run testing (as a "rolling" release
using "testing" instead of the codename in sources.list) for years.
A few weeks ago when I upgraded smartmontools to 6.3+svn3990-1 I
started seeing warnings of uncorrectable read errors from the
e-mail notifier for both systems. The ensuing upgrades to
versions 6.3+svn4002-1 and 6.3+svn4002-2 didn't improve matters.
I edited smartd.conf to notify only in case of an increase in
the error count for both systems. The notebook has been quiet
since then, but the desktop continued to warn me every day.
I purchased a replacement drive (Maxtor DiamondMax 16, model
4R120L0). I installed testing on it, ran the short and long
tests from gsmartcontrol, and saw that both tests ended
prematurely with read errors. I didn't examine the logs from
these tests, but just sent the drive back to the vendor.
I purchased another drive of the same model from a different
vendor. I got the same results from the the short and long tests.
This time I recorded the results of the short and long tests and
am attaching them here.
I also ran memtest86+ 5.01 (all 11 tests) on the system for over
40 hours with 0 errors detected.
System specs:
Intel Pentium 4 CPU 2.20GHz
Chipset: SiS 650 - FSB:100
RAM type: DDR-SDRAM
Memory 1536M
I saw this bug:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=764233
At first I was going to add a comment to that bug to that bug
report, thinking there must be something wrong with
smartmontools, but I scanned down through the test logs this
time and saw that stuff about 42,000+ hours. Does that mean what
I think it means?
Both of the drives I purchase were sold as NEW drives (through
Amazon.com vendors). They were not supposed to be refurbished.
My questions are --
1. Is there something wrong with this drive, or is it possibly
just a drive that doesn't get along with smartmontools. Seems to
be in the database, and I don't know (yet) how to check with
Maxtor to see if the firmware for the drive needs an update.
2. Is this vendor pulling a fast one? Is this a used drive?
3. If #2 is the case, where can I find an honest vendor that
will sell me an unused PATA drive to use with this system?
Thank you for your patience, and for any help you can give me.
Best,
JP
smartctl 6.4 2014-10-07 r4002 [i686-linux-3.16.0-4-686-pae] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Maxtor DiamondMax 16
Device Model: Maxtor 4R120L0
Serial Number: R34K39WE
Firmware Version: RAMB1TU0
User Capacity: 122,942,324,736 bytes [122 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 T13/1532D revision 0
Local Time is: Tue Jan 6 11:35:38 2015 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 116) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 30) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 68) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
3 Spin_Up_Time 0x0027 219 218 063 Pre-fail Always - 13606
4 Start_Stop_Count 0x0032 228 228 000 Old_age Always - 49546
5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail Always - 3
6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0
7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 0
8 Seek_Time_Performance 0x0027 244 243 187 Pre-fail Always - 33706
9 Power_On_Minutes 0x0032 124 124 000 Old_age Always - 148h+15m
10 Spin_Retry_Count 0x002b 253 252 157 Pre-fail Always - 0
11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 253 253 000 Old_age Always - 80
192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 0
193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0
194 Temperature_Celsius 0x0032 253 253 000 Old_age Always - 35
195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always - 57671
196 Reallocated_Event_Count 0x0008 252 252 000 Old_age Offline - 1
197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline - 1
198 Offline_Uncorrectable 0x0008 252 252 000 Old_age Offline - 1
199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age Offline - 0
200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 6
202 Data_Address_Mark_Errs 0x000a 253 251 000 Old_age Always - 0
203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 18
204 Soft_ECC_Correction 0x000a 253 252 000 Old_age Always - 0
205 Thermal_Asperity_Rate 0x000a 253 252 000 Old_age Always - 0
207 Spin_High_Current 0x002a 253 252 000 Old_age Always - 0
208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 0
209 Offline_Seek_Performnce 0x0024 253 253 000 Old_age Offline - 0
99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
SMART Error Log Version: 1
Warning: ATA error count 19 inconsistent with error log pointer 5
ATA Error Count: 19 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 19 occurred at disk power-on lifetime: 42122 hours (1755 days + 2 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 07 d0 29 01 e0 Error: UNC 7 sectors at LBA = 0x000129d0 = 76240
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 d0 29 01 e0 08 2d+07:41:38.768 READ DMA
27 00 00 00 00 00 e0 08 2d+07:41:38.736 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 0a 2d+07:41:38.736 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 0a 2d+07:41:38.720 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 08 2d+07:41:38.720 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 18 occurred at disk power-on lifetime: 42122 hours (1755 days + 2 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 07 d0 29 01 e0 Error: UNC 7 sectors at LBA = 0x000129d0 = 76240
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 d0 29 01 e0 08 2d+07:41:37.360 READ DMA
c8 00 08 c8 29 01 e0 08 2d+07:41:37.344 READ DMA
c8 00 08 c0 29 01 e0 08 2d+07:41:37.344 READ DMA
c8 00 08 b8 29 01 e0 08 2d+07:41:37.344 READ DMA
c8 00 08 b0 29 01 e0 08 2d+07:41:37.328 READ DMA
Error 17 occurred at disk power-on lifetime: 42122 hours (1755 days + 2 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 8f 98 29 01 e0 Error: UNC 143 sectors at LBA = 0x00012998 = 76184
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 c8 98 29 01 e0 08 2d+07:41:35.936 READ DMA
c8 00 a0 00 29 04 e0 08 2d+07:41:35.920 READ DMA
c8 00 60 38 29 01 e0 08 2d+07:41:35.920 READ DMA
e7 00 00 47 52 c4 a0 08 2d+07:41:35.872 FLUSH CACHE
ca 00 08 40 52 c4 e6 08 2d+07:41:35.872 WRITE DMA
Error 16 occurred at disk power-on lifetime: 42070 hours (1752 days + 22 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 08 0b 41 e0 Error: UNC 8 sectors at LBA = 0x00410b08 = 4262664
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 08 0b 41 e0 08 02:46:00.928 READ DMA
c8 00 08 d8 2f 41 e0 08 02:46:00.928 READ DMA
c8 00 08 d0 2f 41 e0 08 02:46:00.928 READ DMA
c8 00 08 18 52 41 e0 08 02:46:00.928 READ DMA
c8 00 08 10 52 41 e0 08 02:46:00.928 READ DMA
Error 15 occurred at disk power-on lifetime: 42070 hours (1752 days + 22 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 18 80 15 44 e0 Error: UNC 24 sectors at LBA = 0x00441580 = 4461952
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 18 80 15 44 e0 08 02:22:05.472 READ DMA
c8 00 60 20 9e 04 ea 08 02:22:05.440 READ DMA
c8 00 20 00 9e 04 ea 08 02:22:05.440 READ DMA
c8 00 08 c8 0c 44 e0 08 02:22:05.424 READ DMA
c8 00 18 88 88 44 ea 08 02:22:05.376 READ DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 40% 42122 76241
# 2 Short offline Completed: read failure 60% 42122 76241
# 3 Extended offline Completed: read failure 40% 42085 76241
# 4 Short offline Completed: read failure 60% 42085 76241
# 5 Short offline Completed: read failure 60% 42085 76241
# 6 Extended offline Completed: read failure 40% 42084 76241
# 7 Short captive Completed without error 00% 42065 -
# 8 Extended offline Completed without error 00% 9 -
# 9 Short offline Completed without error 00% 8 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.smartctl 6.4 2014-10-07 r4002 [i686-linux-3.16.0-4-686-pae] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Maxtor DiamondMax 16
Device Model: Maxtor 4R120L0
Serial Number: R34K39WE
Firmware Version: RAMB1TU0
User Capacity: 122,942,324,736 bytes [122 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 T13/1532D revision 0
Local Time is: Tue Jan 6 11:31:08 2015 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 118) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 30) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 68) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
3 Spin_Up_Time 0x0027 219 218 063 Pre-fail Always - 13606
4 Start_Stop_Count 0x0032 228 228 000 Old_age Always - 49546
5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail Always - 3
6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0
7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 0
8 Seek_Time_Performance 0x0027 245 243 187 Pre-fail Always - 62081
9 Power_On_Minutes 0x0032 124 124 000 Old_age Always - 148h+11m
10 Spin_Retry_Count 0x002b 253 252 157 Pre-fail Always - 0
11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 253 253 000 Old_age Always - 80
192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 0
193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0
194 Temperature_Celsius 0x0032 253 253 000 Old_age Always - 35
195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always - 49931
196 Reallocated_Event_Count 0x0008 252 252 000 Old_age Offline - 1
197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline - 1
198 Offline_Uncorrectable 0x0008 252 252 000 Old_age Offline - 1
199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age Offline - 0
200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 7
202 Data_Address_Mark_Errs 0x000a 253 251 000 Old_age Always - 0
203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 29
204 Soft_ECC_Correction 0x000a 253 252 000 Old_age Always - 0
205 Thermal_Asperity_Rate 0x000a 253 252 000 Old_age Always - 0
207 Spin_High_Current 0x002a 253 252 000 Old_age Always - 0
208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 0
209 Offline_Seek_Performnce 0x0024 253 253 000 Old_age Offline - 0
99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
SMART Error Log Version: 1
Warning: ATA error count 19 inconsistent with error log pointer 5
ATA Error Count: 19 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 19 occurred at disk power-on lifetime: 42122 hours (1755 days + 2 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 07 d0 29 01 e0 Error: UNC 7 sectors at LBA = 0x000129d0 = 76240
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 d0 29 01 e0 08 2d+07:41:38.768 READ DMA
27 00 00 00 00 00 e0 08 2d+07:41:38.736 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 0a 2d+07:41:38.736 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 0a 2d+07:41:38.720 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 08 2d+07:41:38.720 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 18 occurred at disk power-on lifetime: 42122 hours (1755 days + 2 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 07 d0 29 01 e0 Error: UNC 7 sectors at LBA = 0x000129d0 = 76240
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 d0 29 01 e0 08 2d+07:41:37.360 READ DMA
c8 00 08 c8 29 01 e0 08 2d+07:41:37.344 READ DMA
c8 00 08 c0 29 01 e0 08 2d+07:41:37.344 READ DMA
c8 00 08 b8 29 01 e0 08 2d+07:41:37.344 READ DMA
c8 00 08 b0 29 01 e0 08 2d+07:41:37.328 READ DMA
Error 17 occurred at disk power-on lifetime: 42122 hours (1755 days + 2 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 8f 98 29 01 e0 Error: UNC 143 sectors at LBA = 0x00012998 = 76184
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 c8 98 29 01 e0 08 2d+07:41:35.936 READ DMA
c8 00 a0 00 29 04 e0 08 2d+07:41:35.920 READ DMA
c8 00 60 38 29 01 e0 08 2d+07:41:35.920 READ DMA
e7 00 00 47 52 c4 a0 08 2d+07:41:35.872 FLUSH CACHE
ca 00 08 40 52 c4 e6 08 2d+07:41:35.872 WRITE DMA
Error 16 occurred at disk power-on lifetime: 42070 hours (1752 days + 22 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 08 0b 41 e0 Error: UNC 8 sectors at LBA = 0x00410b08 = 4262664
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 08 0b 41 e0 08 02:46:00.928 READ DMA
c8 00 08 d8 2f 41 e0 08 02:46:00.928 READ DMA
c8 00 08 d0 2f 41 e0 08 02:46:00.928 READ DMA
c8 00 08 18 52 41 e0 08 02:46:00.928 READ DMA
c8 00 08 10 52 41 e0 08 02:46:00.928 READ DMA
Error 15 occurred at disk power-on lifetime: 42070 hours (1752 days + 22 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 18 80 15 44 e0 Error: UNC 24 sectors at LBA = 0x00441580 = 4461952
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 18 80 15 44 e0 08 02:22:05.472 READ DMA
c8 00 60 20 9e 04 ea 08 02:22:05.440 READ DMA
c8 00 20 00 9e 04 ea 08 02:22:05.440 READ DMA
c8 00 08 c8 0c 44 e0 08 02:22:05.424 READ DMA
c8 00 18 88 88 44 ea 08 02:22:05.376 READ DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 60% 42122 76241
# 2 Extended offline Completed: read failure 40% 42085 76241
# 3 Short offline Completed: read failure 60% 42085 76241
# 4 Short offline Completed: read failure 60% 42085 76241
# 5 Extended offline Completed: read failure 40% 42084 76241
# 6 Short captive Completed without error 00% 42065 -
# 7 Extended offline Completed without error 00% 9 -
# 8 Short offline Completed without error 00% 8 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Reply to: