Re: GRUB loading.. Welcome to GRUB! error: incompatible license Entering rescue mode..
On 03/28/2015 03:24 PM, Lisi Reisz wrote:
Try googling the error.
Been there, done that. I was hoping this was a known issue. This is
the best clue I've found so far:
http://marc.info/?l=debian-user&m=133683363210396&w=1
See console session below.
Any suggestions?
David
# grub-install --recheck hd0
/usr/sbin/grub-probe: error: cannot find a GRUB drive for
/dev/mapper/sda3_crypt. Check your device.map.
Auto-detection of a filesystem of /dev/mapper/sda3_crypt failed.
Try with --recheck.
If the problem persists please report this together with the output of
"/usr/sbin/grub-probe --device-map="/boot/grub/device.map" --target=fs
-v /boot/grub" to <bug-grub@gnu.org>
# cat /boot/grub/device.map
(fd0) /dev/fd0
(hd0) /dev/disk/by-id/usb-SanDisk_Ultra_Fit_4C530123140926106290-0:0
# /usr/sbin/grub-probe --device-map="/boot/grub/device.map" --target=fs
-v /boot/grub
/usr/sbin/grub-probe: info: `/dev/fd0' looks like a floppy drive, skipping.
/usr/sbin/grub-probe: info: Scanning for dmraid_nv RAID devices on disk hd0.
/usr/sbin/grub-probe: info: the size of hd0 is 31266816.
/usr/sbin/grub-probe: info: the size of hd0 is 31266816.
/usr/sbin/grub-probe: info: Scanning for dmraid_nv RAID devices on disk hd1.
/usr/sbin/grub-probe: info: the size of hd1 is 253952.
/usr/sbin/grub-probe: info: the size of hd1 is 253952.
/usr/sbin/grub-probe: info: scanning hd0 for LVM.
/usr/sbin/grub-probe: info: the size of hd0 is 31266816.
/usr/sbin/grub-probe: info: no LVM signature found.
/usr/sbin/grub-probe: info: the size of hd0 is 31266816.
/usr/sbin/grub-probe: info: scanning hd1 for LVM.
/usr/sbin/grub-probe: info: the size of hd1 is 253952.
/usr/sbin/grub-probe: info: no LVM signature found.
/usr/sbin/grub-probe: info: the size of hd1 is 253952.
/usr/sbin/grub-probe: info: Scanning for mdraid09 RAID devices on disk hd0.
/usr/sbin/grub-probe: info: the size of hd0 is 31266816.
/usr/sbin/grub-probe: info: the size of hd0 is 31266816.
/usr/sbin/grub-probe: info: Scanning for mdraid09 RAID devices on disk hd1.
/usr/sbin/grub-probe: info: the size of hd1 is 253952.
/usr/sbin/grub-probe: info: the size of hd1 is 253952.
/usr/sbin/grub-probe: info: Scanning for mdraid1x RAID devices on disk hd0.
/usr/sbin/grub-probe: info: the size of hd0 is 31266816.
/usr/sbin/grub-probe: info: the size of hd0 is 31266816.
/usr/sbin/grub-probe: info: Scanning for mdraid1x RAID devices on disk hd1.
/usr/sbin/grub-probe: info: the size of hd1 is 253952.
/usr/sbin/grub-probe: info: the size of hd1 is 253952.
/usr/sbin/grub-probe: info: Scanning for mdraid09 RAID devices on disk hd0.
/usr/sbin/grub-probe: info: the size of hd0 is 31266816.
/usr/sbin/grub-probe: info: the size of hd0 is 31266816.
/usr/sbin/grub-probe: info: Scanning for mdraid09 RAID devices on disk
hd0,msdos3.
/usr/sbin/grub-probe: info: the size of hd0 is 31266816.
/usr/sbin/grub-probe: info: Scanning for mdraid09 RAID devices on disk
hd0,msdos2.
/usr/sbin/grub-probe: info: the size of hd0 is 31266816.
/usr/sbin/grub-probe: info: Scanning for mdraid09 RAID devices on disk
hd0,msdos1.
/usr/sbin/grub-probe: info: the size of hd0 is 31266816.
/usr/sbin/grub-probe: info: Scanning for mdraid09 RAID devices on disk hd1.
/usr/sbin/grub-probe: info: the size of hd1 is 253952.
/usr/sbin/grub-probe: info: the size of hd1 is 253952.
/usr/sbin/grub-probe: info: Scanning for mdraid09 RAID devices on disk
hd1,msdos1.
/usr/sbin/grub-probe: info: the size of hd1 is 253952.
/usr/sbin/grub-probe: info: Scanning for mdraid1x RAID devices on disk hd0.
/usr/sbin/grub-probe: info: the size of hd0 is 31266816.
/usr/sbin/grub-probe: info: the size of hd0 is 31266816.
/usr/sbin/grub-probe: info: Scanning for mdraid1x RAID devices on disk
hd0,msdos3.
/usr/sbin/grub-probe: info: the size of hd0 is 31266816.
/usr/sbin/grub-probe: info: Scanning for mdraid1x RAID devices on disk
hd0,msdos2.
/usr/sbin/grub-probe: info: the size of hd0 is 31266816.
/usr/sbin/grub-probe: info: Scanning for mdraid1x RAID devices on disk
hd0,msdos1.
/usr/sbin/grub-probe: info: the size of hd0 is 31266816.
/usr/sbin/grub-probe: info: Scanning for mdraid1x RAID devices on disk hd1.
/usr/sbin/grub-probe: info: the size of hd1 is 253952.
/usr/sbin/grub-probe: info: the size of hd1 is 253952.
/usr/sbin/grub-probe: info: Scanning for mdraid1x RAID devices on disk
hd1,msdos1.
/usr/sbin/grub-probe: info: the size of hd1 is 253952.
/usr/sbin/grub-probe: info: scanning hd0 for LVM.
/usr/sbin/grub-probe: info: the size of hd0 is 31266816.
/usr/sbin/grub-probe: info: no LVM signature found.
/usr/sbin/grub-probe: info: the size of hd0 is 31266816.
/usr/sbin/grub-probe: info: scanning hd0,msdos3 for LVM.
/usr/sbin/grub-probe: info: the size of hd0 is 31266816.
/usr/sbin/grub-probe: info: no LVM signature found.
/usr/sbin/grub-probe: info: scanning hd0,msdos2 for LVM.
/usr/sbin/grub-probe: info: the size of hd0 is 31266816.
/usr/sbin/grub-probe: info: no LVM signature found.
/usr/sbin/grub-probe: info: scanning hd0,msdos1 for LVM.
/usr/sbin/grub-probe: info: the size of hd0 is 31266816.
/usr/sbin/grub-probe: info: no LVM signature found.
/usr/sbin/grub-probe: info: scanning hd1 for LVM.
/usr/sbin/grub-probe: info: the size of hd1 is 253952.
/usr/sbin/grub-probe: info: no LVM signature found.
/usr/sbin/grub-probe: info: the size of hd1 is 253952.
/usr/sbin/grub-probe: info: scanning hd1,msdos1 for LVM.
/usr/sbin/grub-probe: info: the size of hd1 is 253952.
/usr/sbin/grub-probe: info: no LVM signature found.
/usr/sbin/grub-probe: info: no mapping exists for `/dev/mapper/sda3_crypt'.
/usr/sbin/grub-probe: error: cannot find a GRUB drive for
/dev/mapper/sda3_crypt. Check your device.map.
# ls -l /dev/mapper/sda3_crypt
brw------- 1 root root 253, 0 Mar 28 15:55 /dev/mapper/sda3_crypt
# cat /etc/crypttab
sda2_crypt /dev/sda2 /dev/urandom cipher=aes-xts-plain64,size=256,swap
sda3_crypt UUID=a1281263-ae35-4ea1-8a62-54748aa481d6 none luks
# cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
/dev/mapper/sda3_crypt / ext4 errors=remount-ro 0 1
# /boot was on /dev/sda1 during installation
UUID=086acfbb-eaae-4788-8357-90ed7c807583 /boot ext4
defaults 0 2
/dev/mapper/sda2_crypt none swap sw 0 0
/dev/sr0 /media/cdrom0 udf,iso9660 user,noauto 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto 0 0
/dev/sda1 /media/usb0 auto rw,user,noauto 0 0
/dev/sda2 /media/usb1 auto rw,user,noauto 0 0
/dev/sda3 /media/usb2 auto rw,user,noauto 0 0
Reply to: