[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

lm_sensors log



Bonjour,

After the last upgrade of my debien sid, lm_sensors reports in logwatch
(first time I see that! I didn't change anything in my config). Here is
the last report:

--------------------- lm_sensors output Begin ------------------------

 acpitz-virtual-0
 Adapter: Virtual device
 temp1:        +27.8 C  (crit = +106.0 C)
 temp2:        +29.8 C  (crit = +106.0 C)

 coretemp-isa-0000
 Adapter: ISA adapter
 Physical id 0:  +37.0 C  (high = +85.0 C, crit = +105.0 C)
 Core 0:         +37.0 C  (high = +85.0 C, crit = +105.0 C)
 Core 1:         +34.0 C  (high = +85.0 C, crit = +105.0 C)
 Core 2:         +32.0 C  (high = +85.0 C, crit = +105.0 C)
 Core 3:         +33.0 C  (high = +85.0 C, crit = +105.0 C)

 nct6779-isa-0290
 Adapter: ISA adapter
 in0:                    +0.94 V  (min =  +0.00 V, max =  +1.74 V)
 in1:                    +1.01 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
 in2:                    +3.33 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
 in3:                    +3.33 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
 in4:                    +1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
 in5:                    +2.04 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
 in6:                    +2.04 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
 in7:                    +3.38 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
 in8:                    +3.30 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
 in9:                    +1.07 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
 in10:                   +2.04 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
 in11:                   +2.04 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
 in12:                   +0.26 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
 in13:                   +0.17 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
 in14:                   +2.04 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
 fan1:                     0 RPM  (min =    0 RPM)
 fan2:                  1166 RPM  (min =    0 RPM)
 fan3:                     0 RPM  (min =    0 RPM)
 fan4:                     0 RPM  (min =    0 RPM)
 fan5:                     0 RPM  (min =    0 RPM)
 SYSTIN:                 +30.0 C  (high =  +0.0 C, hyst =  +0.0 C)
ALARM  sensor = thermistor
 CPUTIN:                 +27.0 C  (high = +80.0 C, hyst = +75.0 C)
sensor = thermistor
 AUXTIN0:                -63.0 C    sensor = thermistor
 AUXTIN1:                -63.0 C    sensor = thermistor
 AUXTIN2:                -63.0 C    sensor = thermistor
 AUXTIN3:                -62.0 C    sensor = thermistor
 PCH_CHIP_CPU_MAX_TEMP:   +0.0 C
 PCH_CHIP_TEMP:           +0.0 C
 PCH_CPU_TEMP:            +0.0 C
 PCH_MCH_TEMP:            +0.0 C
 intrusion0:            ALARM
 intrusion1:            ALARM
 beep_enable:           disabled


 ---------------------- lm_sensors output End -------------------------

What does it mean?

Thank you.

-- 
François Patte
UFR de mathématiques et informatique
Laboratoire CNRS MAP5, UMR 8145
Université Paris Descartes
45, rue des Saints Pères
F-75270 Paris Cedex 06
Tél. +33 (0)1 8394 5849
http://www.math-info.univ-paris5.fr/~patte

Attachment: signature.asc
Description: OpenPGP digital signature


Reply to: