Im having an unsual issue with my debian 6.0.7 server. This is a fresh install and i set the IP settings to DHCP. It get the IP from my router(192.168.1.1), I tried to ping the router IP but it doesn't reply i tried to ping a computers it replies fine, I don't know what's going on here this is the first time i had an issue with debian in terms of network. The router is accessible and can be ping from my laptop.
$ ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1): 56 data bytes
64 bytes from
192.168.1.1: icmp_seq=0 ttl=254 time=2.623 ms
64 bytes from
192.168.1.1: icmp_seq=1 ttl=254 time=1.000 ms
$ ping 192.168.1.200
PING 192.168.1.200 (192.168.1.200): 56 data bytes
---from debian server---
root@debian:~# ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
PING 192.168.1.2 (192.168.1.2) 56(84) bytes of data.
64 bytes from
192.168.1.2: icmp_req=1 ttl=64 time=40.5 ms
64 bytes from
192.168.1.2: icmp_req=2 ttl=64 time=1.96 ms
64 bytes from
192.168.1.2: icmp_req=3 ttl=64 time=2.08 ms
^C
--- 192.168.1.2 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2003ms
rtt min/avg/max/mdev = 1.967/14.861/40.532/18.152 ms
I don't know if there's an issue with TTL or even if it's related at all. I also run arp from the debian server and it can see the router's IP(192.168.1.1)
root@debian:~# arp -a
? (192.168.1.1) at 40:4a:03:d6:ac:a9 [ether] on eth1
? (192.168.1.101) at e0:f8:47:1e:a0:a6 [ether] on eth1
? (192.168.1.105) at 08:00:27:b3:86:01 [ether] on eth1
? (192.168.1.200) at 00:16:b6:1e:01:a0 [ether] on eth1