----- Original Message -----From:"Karl E. Jorgensen" <karl@jorgensen.org.uk>To:<debian-user@lists.debian.org>Cc:Sent:Wed, 27 Nov 2013 22:00:49 +0000Subject:Re: No Video
On Wed, Nov 27, 2013 at 02:35:57PM -0500, erosenberg@hygeiabiomedical.com wrote:
> Dear List  -
>
> I was having problems with the video on my Linux box; ie no video, only
> terminal after an update. Â I am running jessy/sid 32 bit. Â The question was
> whether the hard drive and/or the Intel video chip on the board were bad. Â A
> disk test showed no errors, Â and a clean boot from a live CD showed that the
> video chip was good.
What makes you think the hard drive is bad?
If you only get text mode, then it sounds more like your X server is
having a problem.
And since it happened as a result of an update, I'd suspect the
software, rather than the hardware. A dive into the X logs might help here..
--
Karl E. Jorgensen
Karl -
Thanks.
Here is Xorg.0.log -- I appologise for its length, but I AM A NEWBIE and do not know what could be left out
...
[ 40.730]X.Org X Server 1.143Release Date: 2013-09-12[ 40.730] X Protocol Version 11, Revision 0[ 40.730] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian[ 40.730] Current Operating System: Linux rosenberg 3.10-3-686-pae #1 SMP Debian 3.10.11-1 (2013-09-10) i686[ 40.730] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.10-3-686-pae root=UUID=128e2d3c-719a-4801-95a4-2829cc94d547 ro quiet[ 40.730] Build Date: 08 October 2013 09:42:53PM[ 40.730] xorg-server 2:1.14.3-4 (Julien Cristau <jcristau@debian.org>)[ 40.730] Current version of pixman: 0.30.2[ 40.730] Before reporting problems, check http://wiki.x.orgto make sure that you have the latest version.[ 40.730] Markers: (--) probed, (**) from config file, (==) default setting,(++) from command line, (!!) notice, (II) informational,(WW) warning, (EE) error, (NI) not implemented, (??) unknown.[ 40.731] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 28 19:27:32 2013[ 40.900] (==) Using system config directory "/usr/share/X11/xorg.conf.d"[ 41.160] (==) No Layout section. Using the first Screen section.[ 41.160] (==) No screen section available. Using defaults.[ 41.160] (**) |-->Screen "Default Screen Section" (0)[ 41.160] (**) | |-->Monitor "<default monitor>"[ 41.178] (==) No monitor specified for screen "Default Screen Section".Using a default monitor configuration.[ 41.178] (==) Automatically adding devices[ 41.178] (==) Automatically enabling devices[ 41.178] (==) Automatically adding GPU devices[ 41.227] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.[ 41.227] Entry deleted from font path.[ 41.259] (==) FontPath set to:/usr/share/fonts/X11/misc,/usr/share/fonts/X11/100dpi/:unscaled,/usr/share/fonts/X11/75dpi/:unscaled,/usr/share/fonts/X11/Type1,/usr/share/fonts/X11/100dpi,/usr/share/fonts/X11/75dpi,built-ins[ 41.259] (==) ModulePath set to "/usr/lib/xorg/modules"[ 41.259] (II) The server relies on udev to provide the list of input devices.If no devices become available, reconfigure udev or disable AutoAddDevices.[ 41.259] (II) Loader magic: 0xb770d6a0[ 41260] (II) Module ABI versions:[ 41.260] X.Org ANSI C Emulation: 0.4[ 41.260] X.Org Video Driver: 14.1[ 41.260] X.Org XInput driver : 19.1[ 41.260] X.Org Server Extension : 7.0[ 41.260] (II) xfree86: Adding drm device (/dev/dri/card0)[ 41.262] (--) PCI:*(0:0:2:0) 8086:2572:1014:0285 rev 2, Mem @ 0xf0000000/134217728, 0xe8000000/524288, I/O @ 0x00001800/8[ 41262] (II) Open ACPI successful (/var/run/acpid.socket)[ 41.276] Initializing built-in extension Generic Event Extension[ 41.276] Initializing built-in extension SHAPE[ 41.276] Initializing built-in extension MIT-SHM[ 41.276] Initializing built-in extension XInputExtension[ 41.276] Initializing built-in extension XTEST[ 41.276] Initializing built-in extension BIG-REQUESTS[ 41.276] Initializing built-in extension SYNC[ 41.276] Initializing built-in extension XKEYBOARD[ 41.276] Initializing built-in extension XC-MISC[ 41.276] Initializing built-in extension SECURITY[ 41.276] Initializing built-in extension XINERAMA[ 41.276] Initializing built-in extension XFIXES[ 41.276] Initializing built-in extension RENDER[ 41.276] Initializing built-in extension RANDR[ 41.276] Initializing built-in extension COMPOSITE[ 41.276] Initializing built-in extension DAMAGE[ 41.276] Initializing built-in extension MIT-SCREEN-SAVER[ 41.277] Initializing built-in extension DOUBLE-BUFFER[ 41.277] Initializing built-in extension RECORD[ 41.277] Initializing built-in extension DPMS[ 41.277] Initializing built-in extension X-Resource[ 41.277] Initializing built-in extension XVideo[ 41.277] Initializing built-in extension XVideo-MotionCompensation[ 41.277] Initializing built-in extension SELinux[ 41.277] Initializing built-in extension XFree86-VidModeExtension[ 41.277] Initializing built-in extension XFree86-DGA[ 41.277] Initializing built-in extension XFree86-DRI[ 41.277] Initializing built-in extension DRI2[ 41.277] (II) LoadModule: "glx"[ 41.472] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so[ 41.641] (II) Module glx: vendor="X.Org Foundation"[ 41.641] compiled for 1.14.3, module version = 1.0.0[ 41.641] ABI class: X.Org Server Extension, version 7.0[ 41.641] (==) AIGLX enabled[ 41.736] Loading extension GLX[ 41.736] (==) Matched intel as autoconfigured driver 0[ 41.736] (==) Matched intel as autoconfigured driver 1[ 41.736] (==) Matched vesa as autoconfigured driver 2[ 41.736] (==) Matched modesetting as autoconfigured driver 3[ 41.736] (==) Matched fbdev as autoconfigured driver 4[ 41.736] (==) Assigned the driver to the xf86ConfigLayout[ 41.736] (II) LoadModule: "intel"[ 41.736] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so[ 42.446] (II) Module intel: vendor="X.Org Foundation"[ 42.446] compiled for 1.14.3, module version = 2.21.15[ 42.447] Module class: X.Org Video Driver[ 42.447] ABI class: X.Org Video Driver, version 14.1[ 42.447] (II) LoadModule: "vesa"[ 42.447] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so[ 42.458] (II) Module vesa: vendor="X.Org Foundation"[ 42.458] compiled for 1.14.3, module version = 2.3.3[ 42.458] Module class: X.Org Video Driver[ 42.458] ABI class: X.Org Video Driver, version 14.1[ 42.458] (II) LoadModule: "modesetting"[ 42.459] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so[ 42.467] (II) Module modesetting: vendor="X.Org Foundation"[ 42.468] compiled for 1.14.3, module version = 0.8.0[ 42.480] Module class: X.Org Video Driver[ 42.480] ABI class: X.Org Video Driver, version 14.1[ 42.480] (II) LoadModule: "fbdev"[ 42.480] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so[ 42.654] (II) Module fbdev: vendor="X.Org Foundation"[ 42.654] compiled for 1.14.3, module version = 0.4.4[ 42.654] Module class: X.Org Video Driver[ 42.654] ABI class: X.Org Video Driver, version 14.1[ 42.654] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200[ 42.657] (II) VESA: driver for VESA chipsets: vesa[ 42.657] (II) modesetting: Driver for Modesetting Kernel Drivers: kms[ 42.657] (II) FBDEV: driver for framebuffer: fbdev[ 42.657] (++) using VT number 7[ 42.701] (WW) Falling back to old probe method for vesa[ 42.701] (WW) Falling back to old probe method for modesetting[ 42.702] (WW) Falling back to old probe method for fbdev[ 42.702] (II) Loading sub module "fbdevhw"[ 42.702] (II) LoadModule: "fbdevhw"[ 42.702] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so[ 42.720] (II) Module fbdevhw: vendor="X.Org Foundation"[ 42.720] compiled for 1.14.3, module version = 0.0.2[ 42.720] ABI class: X.Org Video Driver, version 14.1[ 42.720] (II) intel(0): Creating default Display subsection in Screen section"Default Screen Section" for depth/fbbpp 24/32[ 42.720] (==) intel(0): Depth 24, (--) framebuffer bpp 32[ 42.720] (==) intel(0): RGB weight 888[ 42.720] (==) intel(0): Default visual is TrueColor[ 42.720] (--) intel(0): Integrated Graphics Chipset: Intel(R) 865G[ 42.721] (**) intel(0): Relaxed fencing disabled[ 42.721] (**) intel(0): Wait on SwapBuffers? enabled[ 42.721] (**) intel(0): Triple buffering? enabled[ 42.721] (**) intel(0): Framebuffer tiled[ 42.721] (**) intel(0): Pixmaps tiled[ 42.721] (**) intel(0): 3D buffers tiled[ 42.737] (**) intel(0): SwapBuffers wait enabled[ 42.737] (==) intel(0): video overlay key set to 0x101fe[ 42.904] (II) intel(0): Output VGA1 has no monitor section[ 43.072] (II) intel(0): EDID for output VGA1[ 43.072] (II) intel(0): Manufacturer: IBM Model: 24c9 Serial#: 123456[ 43.072] (II) intel(0): Year: 2006 Week: 11[ 43.072] (II) intel(0): EDID Version: 1.3[ 43.072] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V[ 43.072] (II) intel(0): Sync: Separate[ 43.072] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 27[ 43.072] (II) intel(0): Gamma: 2.20[ 43.072] (II) intel(0): DPMS capabilities: Off; RGB/Color Display[ 43.072] (II) intel(0): First detailed timing is preferred mode[ 43.072] (II) intel(0): redX: 0.649 redY: 0.329 greenX: 0.300 greenY: 0.060[ 43.072] (II) intel(0): blueX: 0.140 blueY: 0.079 whiteX: 0.312 whiteY: 0.328[ 43.072] (II) intel(0): Supported established timings:[ 43.072] (II) intel(0): 720x400@70Hz[ 43.072] (II) intel(0): 640x480@60Hz[ 43.072] (II) intel(0): 640x480@72Hz[ 43.072] (II) intel(0): 640x480@75Hz[ 43.072] (II) intel(0): 800x600@60Hz[ 43.073] (II) intel(0): 800x600@72Hz[ 43.073] (II) intel(0): 800x600@75Hz[ 43.073] (II) intel(0): 1024x768@60Hz[ 43.073] (II) intel(0): 1024x768@70Hz[ 43.073] (II) intel(0): 1024x768@75Hz[ 43.073] (II) intel(0): 1280x1024@75Hz[ 43.073] (II) intel(0): Manufacturer's mask: 0[ 43.073] (II) intel(0): Supported standard timings:[ 43.073] (II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897[ 43.073] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 70 vid: 35457[ 43.073] (II) intel(0): Supported detailed timing:[ 43.073] (II) intel(0): clock: 135.0 MHz Image Size: 340 x 270 mm[ 43.073] (II) intel(0): h_active: 1280 h_sync: 1296 h_sync_end 1440 h_blank_end 1688 h_border: 0[ 43.073] (II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0[ 43.073] (II) intel(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz[ 43.073] (II) intel(0): Serial No: V2VA799[ 43.073] (II) intel(0): Monitor name: IBM L171[ 43.073] (II) intel(0): EDID (in hex):[ 43.073] (II) intel(0): 00ffffffffffff00244dc92440e20100[ 43.073] (II) intel(0): 0b10010368221b782a5dd0a6544c0f23[ 43.073] (II) intel(0): 145054adcf008180818a010101010101[ 43.073] (II) intel(0): 010101010101bc34009851002a401090[ 43.073] (II) intel(0): 1300540e1100001e000000fd00374b1e[ 43.073] (II) intel(0): 530e000a202020202020000000ff0056[ 43.073] (II) intel(0): 3256413739390a2020202020000000fc[ 43.073] (II) intel(0): 0049424d204c3137310a20202020000b[ 43.073] (II) intel(0): Printing probed modes for output VGA1[ 43.074] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz eP)[ 43.074] (II) intel(0): Modeline "1280x1024"x70.0 128.95 1280 1368 1504 1728 1024 1025 1028 1066 -hsync +vsync (74.6 kHz)[ 43.074] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)[ 43.074] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)[ 43.074] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)[ 43.074] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)[ 43.074] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)[ 43.074] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)[ 43.074] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)[ 43.074] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)[ 43.074] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)[ 43.074] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)[ 43.074] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)[ 43.074] (II) intel(0): Output VGA1 connected[ 43.074] (II) intel(0): Using exact sizes for initial modes[ 43.074] (II) intel(0): Output VGA1 using initial mode 1280x1024[ 43.074] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.[ 43.074] (II) intel(0): Kernel page flipping support detected, enabling[ 43.074] (==) intel(0): DPI set to (96, 96)[ 43.074] (II) Loading sub module "fb"[ 43.074] (II) LoadModule: "fb"[ 43.075] (II) Loading /usr/lib/xorg/modules/libfb.so[ 43.226] (II) Module fb: vendor="X.Org Foundation"[ 43.227] compiled for 1.14.3, module version = 1.0.0[ 43.227] ABI class: X.Org ANSI C Emulation, version 0.4[ 43.227] (II) Loading sub module "dri2"[ 43.227] (II) LoadModule: "dri2"[ 43.227] (II) Module "dri2" already built-in[ 43.227] (II) UnloadModule: "vesa"[ 43.227] (II) Unloading vesa[ 43227] (II) UnloadModule: "modesetting"[ 43.227] (II) Unloading modesetting[ 43.227] (II) UnloadModule: "fbdev"[ 43.227] (II) Unloading fbdev[ 43.227] (II) UnloadSubModule: "fbdevhw"[ 43.227] (II) Unloading fbdevhw[ 43.227] (==) Depth 24 pixmap format is 32 bpp[ 43.294] (II) intel(0): [DRI2] Setup complete[ 43.294] (II) intel(0): [DRI2] DRI driver: i915[ 43.294] (II) intel(0): Allocated new frame buffer 1280x1024 stride 8192, tiled[ 43.468] (II) UXA(0): Driver registered support for the following operations:[ 43.469] (II) solid[ 43.469] (II) copy[ 43.469] (II) composite (RENDER acceleration)[ 43.469] (II) put_image[ 43.469] (II) get_image[ 43.469] (==) intel(0): Backing store disabled[ 43.469] (==) intel(0): Silken mouse enabled[ 43.477] (II) intel(0): Initializing HW Cursor[ 43.477] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.[ 43.523] (==) intel(0): DPMS enabled[ 43.523] (==) intel(0): Intel XvMC decoder disabled[ 43.524] (II) intel(0): Set up overlay video[ 43.524] (II) intel(0): direct rendering: DRI2 Enabled[ 43.524] (==) intel(0): hotplug detection: "enabled"[ 43.560] (--) RandR disabled[ 43.588] (II) SELinux: Disabled on system[ 44.467] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer[ 44.467] (II) AIGLX: enabled GLX_INTEL_swap_event[ 44.467] (II) AIGLX: enabled GLX_ARB_create_context[ 44.467] (II) AIGLX: enabled GLX_ARB_create_context_profile[ 44.467] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile[ 44.468] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control[ 44.468] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects[ 44.468] (II) AIGLX: Loaded and initialized i915[ 44.468] (II) GLX: Initialized DRI2 GL provider for screen 0[ 44.469] (II) intel(0): Setting screen physical size to 338 x 270[ 46.446] (II) config/udev: Adding input device Power Button (/dev/input/event3)[ 46.446] (**) Power Button: Applying InputClass "evdev keyboard catchall"[ 46.446] (II) LoadModule: "evdev"[ 46.447] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so[ 46.780] (II) Module evdev: vendor="X.Org Foundation"[ 46.780] compiled for 1.14.3, module version = 2.8.1[ 46.780] Module class: X.Org XInput Driver[ 46.780] ABI class: X.Org XInput driver, version 19.1[ 46.780] (II) Using input driver 'evdev' for 'Power Button'[ 46.780] (**) Power Button: always reports core events[ 46.780] (**) evdev: Power Button: Device: "/dev/input/event3"[ 46.780] (--) evdev: Power Button: Vendor 0 Product 0x1[ 46.780] (--) evdev: Power Button: Found keys[ 46.780] (II) evdev: Power Button: Configuring as keyboard[ 46.780] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"[ 46.780] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)[ 46.780] (**) Option "xkb_rules" "evdev"[ 46.780] (**) Option "xkb_model" "pc104"[ 46.781] (**) Option "xkb_layout" "us,il"[ 46.781] (**) Option "xkb_variant" ","[ 46.781] (**) Option "xkb_options" "grp:cntrl_shift_toggle"[ 46.931] (II) config/udev: Adding input device Power Button (/dev/input/event2)[ 46.931] (**) Power Button: Applying InputClass "evdev keyboard catchall"[ 46.931] (II) Using input driver 'evdev' for 'Power Button'[ 46.931] (**) Power Button: always reports core events[ 46.931] (**) evdev: Power Button: Device: "/dev/input/event2"[ 46.931] (--) evdev: Power Button: Vendor 0 Product 0x1[ 46.931] (--) evdev: Power Button: Found keys[ 46.931] (II) evdev: Power Button: Configuring as keyboard[ 46.931] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0C:00/input/input2/event2"[ 46.931] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)[ 46.932] (**) Option "xkb_rules" "evdev"[ 46932] (**) Option "xkb_model" "pc104"[ 46.932] (**) Option "xkb_layout" "us,il"[ 46.932] (**) Option "xkb_variant" ","[ 46.932] (**) Option "xkb_options" "grp:cntrl_shift_toggle"[ 46.932] (II) config/udev: Adding drm device (/dev/dri/card0)[ 46.933] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event0)[ 46.933] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"[ 46.933] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'[ 46933] (**) Logitech USB Keyboard: always reports core events[ 46.933] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event0"[ 46.933] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c[ 46.933] (--) evdev: Logitech USB Keyboard: Found keys[ 46.933] (II) evdev: Logitech USB Keyboard: Configuring as keyboard[ 46.933] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input0/event0"[ 46.933] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 8)[ 46.933] (**) Option "xkb_rules" "evdev"[ 46.933] (**) Option "xkb_model" "pc104"[ 46.933] (**) Option "xkb_layout" "us,il"[ 46.933] (**) Option "xkb_variant" ","[ 46.934] (**) Option "xkb_options" "grp:cntrl_shift_toggle"[ 46934] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event1)[ 46.934] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"[ 46.934] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'[ 46.935] (**) Logitech USB Keyboard: always reports core events[ 46.935] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event1"[ 46.935] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c[ 46.935] (--) evdev: Logitech USB Keyboard: Found absolute axes[ 46.935] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist.[ 46.935] (--) evdev: Logitech USB Keyboard: Found keys[ 46.935] (II) evdev: Logitech USB Keyboard: Forcing relative x/y axes to exist.[ 46.935] (II) evdev: Logitech USB Keyboard: Configuring as mouse[ 46.935] (II) evdev: Logitech USB Keyboard: Configuring as keyboard[ 46.935] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.1/input/input1/event1"[ 46.935] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 9)[ 46.935] (**) Option "xkb_rules" "evdev"[ 46.935] (**) Option "xkb_model" "pc104"[ 46.935] (**) Option "xkb_layout" "us,il"[ 46.935] (**) Option "xkb_variant" ","[ 46.935] (**) Option "xkb_options" "grp:cntrl_shift_toggle"[ 46.935] (II) evdev: Logitech USB Keyboard: initialized for absolute axes.[ 46.936] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1[ 46.936] (**) Logitech USB Keyboard: (accel) acceleration profile 0[ 46.936] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000[ 46.936] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4[ 46.936] (II) config/udev: Adding input device ImExPS/2 Logitech Explorer Mouse (/dev/input/event5)[ 46.936] (**) ImExPS/2 Logitech Explorer Mouse: Applying InputClass "evdev pointer catchall"[ 46.936] (II) Using input driver 'evdev' for 'ImExPS/2 Logitech Explorer Mouse'[ 46.936] (**) ImExPS/2 Logitech Explorer Mouse: always reports core events[ 46.936] (**) evdev: ImExPS/2 Logitech Explorer Mouse: Device: "/dev/input/event5"[ 46.937] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Vendor 0x2 Product 0x6[ 46937] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found 9 mouse buttons[ 46.937] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found scroll wheel(s)[ 46.937] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found relative axes[ 46.937] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found x and y relative axes[ 46.937] (II) evdev: ImExPS/2 Logitech Explorer Mouse: Configuring as mouse[ 46.937] (II) evdev: ImExPS/2 Logitech Explorer Mouse: Adding scrollwheel support[ 46.937] (**) evdev: ImExPS/2 Logitech Explorer Mouse: YAxisMapping: buttons 4 and 5[ 46.937] (**) evdev: ImExPS/2 Logitech Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200[ 46.937] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"[ 46.937] (II) XINPUT: Adding extended input device "ImExPS/2 Logitech Explorer Mouse" (type: MOUSE, id 10)[ 46.937] (II) evdev: ImExPS/2 Logitech Explorer Mouse: initialized for relative axes.[ 46.937] (**) ImExPS/2 Logitech Explorer Mouse: (accel) keeping acceleration scheme 1[ 46.937] (**) ImExPS/2 Logitech Explorer Mouse: (accel) acceleration profile 0[ 46.937] (**) ImExPS/2 Logitech Explorer Mouse: (accel) acceleration factor: 2.000[ 46.937] (**) ImExPS/2 Logitech Explorer Mouse: (accel) acceleration threshold: 4[ 46.938] (II) config/udev: Adding input device ImExPS/2 Logitech Explorer Mouse (/dev/input/mouse0)[ 46.938] (II) No input driver specified, ignoring this device.[ 46.938] (II) This device may have been added with another device file.[ 46938] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)[ 46.938] (II) No input driver specified, ignoring this device.[ 46.938] (II) This device may have been added with another device file.[ 80.012] (II) intel(0): EDID vendor "IBM", prod id 9417[ 80.012] (II) intel(0): Using EDID range info for horizontal sync[ 80.012] (II) intel(0): Using EDID range info for vertical refresh[ 80.012] (II) intel(0): Printing DDC gathered Modelines:[ 80.012] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz eP)[ 80.012] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)[ 80.012] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)[ 80.012] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)[ 80.012] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)[ 80.012] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)[ 80.012] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)[ 80.012] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)[ 80.012] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)[ 80.012] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)[ 80.012] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)[ 80.013] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)[ 80.013] (II) intel(0): Modeline "1280x1024"x70.0 128.94 1280 1368 1504 1728 1024 1025 1028 1066 -hsync +vsync (74.6 kHz e)[ 85.748] (II) intel(0): EDID vendor "IBM", prod id 9417[ 85.748] (II) intel(0): Using hsync ranges from config file[ 85.748] (II) intel(0): Using vrefresh ranges from config file[ 85.748] (II) intel(0): Printing DDC gathered Modelines:[ 85.748] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz eP)[ 85.748] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)[ 85.748] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)[ 85.748] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)[ 85.748] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)[ 85.748] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)[ 85.748] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)[ 85.748] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)[ 85.748] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)[ 85.748] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)[ 85.748] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)[ 85.748] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)[ 85.748] (II) intel(0): Modeline "1280x1024"x70.0 128.94 1280 1368 1504 1728 1024 1025 1028 1066 -hsync +vsync (74.6 kHz e)[ 86.440] (II) intel(0): EDID vendor "IBM", prod id 9417[ 86.440] (II) intel(0): Using hsync ranges from config file[ 86.440] (II) intel(0): Using vrefresh ranges from config file[ 86.440] (II) intel(0): Printing DDC gathered Modelines:[ 86.440] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz eP)[ 86.440] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)[ 86.440] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)[ 86.440] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)[ 86.440] (II) intel(0): Modeline "640x480"x0.0 2518 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)[ 86.440] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)[ 86.440] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)[ 86.440] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)[ 86.440] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)[ 86.440] (II) intel(0): Modeline "800x600"x0.0 4950 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)[ 86.440] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)[ 86.440] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)[ 86.441] (II) intel(0): Modeline "1280x1024"x70.0 128.94 1280 1368 1504 1728 1024 1025 1028 1066 -hsync +vsync (74.6 kHz e)[ 147.176] (II) AIGLX: Suspending AIGLX clients for VT switchTIAEthan