Wheezy: mcelog not getting notified of ECC errors anymore?
Hi,
Im refering to a post @
http://lists.debian.org/debian-amd64/2013/06/msg00003.html
Im not shure what to do :)
but I was in the middle of a android build and these apeare
log:
Message from syslogd@builder at Oct 22 20:21:26 ...
kernel:[18300.780062] [Hardware Error]: CPU:3 MC0_STATUS[-|CE|-|-|AddrV|CECC]:
0x9454400000000833
Message from syslogd@builder at Oct 22 20:21:26 ...
kernel:[18300.780072] [Hardware Error]: MC0_ADDR: 0x000000010516e100
Message from syslogd@builder at Oct 22 20:21:26 ...
kernel:[18300.780074] [Hardware Error]: Data Cache Error: during system
linefill.
Message from syslogd@builder at Oct 22 20:21:26 ...
kernel:[18300.780078] [Hardware Error]: cache level: L3/GEN, mem/io: MEM,
mem-tx: DRD, part-proc: SRC (no timeout)
Message from syslogd@builder at Oct 22 20:21:26 ...
kernel:[18300.792078] [Hardware Error]: CPU:2 MC0_STATUS[-|CE|-|-|AddrV|CECC]:
0x9454400000000833
Message from syslogd@builder at Oct 22 20:21:26 ...
kernel:[18300.792087] [Hardware Error]: MC0_ADDR: 0x000000010516e100
Message from syslogd@builder at Oct 22 20:21:26 ...
kernel:[18300.792089] [Hardware Error]: Data Cache Error: during system
linefill.
Message from syslogd@builder at Oct 22 20:21:26 ...
kernel:[18300.792093] [Hardware Error]: cache level: L3/GEN, mem/io: MEM,
mem-tx: DRD, part-proc: SRC (no timeout)
Message from syslogd@builder at Oct 22 20:26:26 ...
kernel:[18600.792060] [Hardware Error]: CPU:2 MC0_STATUS[-|CE|-|-|AddrV|CECC]:
0x9454400000000833
Message from syslogd@builder at Oct 22 20:26:26 ...
kernel:[18600.792068] [Hardware Error]: MC0_ADDR: 0x000000010516e100
Message from syslogd@builder at Oct 22 20:26:26 ...
kernel:[18600.792070] [Hardware Error]: Data Cache Error: during system
linefill.
Message from syslogd@builder at Oct 22 20:26:26 ...
kernel:[18600.792073] [Hardware Error]: cache level: L3/GEN, mem/io: MEM,
mem-tx: DRD, part-proc: SRC (no timeout)
Message from syslogd@builder at Oct 22 20:26:26 ...
kernel:[18600.792080] [Hardware Error]: CPU:2 MC4_STATUS[-|CE|-|-|AddrV|CECC]:
0x9454400100000813
Message from syslogd@builder at Oct 22 20:26:26 ...
kernel:[18600.792083] [Hardware Error]: MC4_ADDR: 0x000000010516e128
Message from syslogd@builder at Oct 22 20:26:26 ...
kernel:[18600.792085] [Hardware Error]: Northbridge Error (node 1): DRAM ECC
error detected on the NB.
Message from syslogd@builder at Oct 22 20:26:26 ...
kernel:[18600.792099] [Hardware Error]: cache level: L3/GEN, mem/io: MEM,
mem-tx: RD, part-proc: SRC (no timeout)
would someone please push this to the correct human, tnx!
Reply to: