Hallo,
i will try a Multi-WAN-Routing.
It look like:
LAN -- Router (Debian squeeze) -- ISP Line 1
|----- ISP Line 2
The ISP- Ip's are static.
Here some links i have found:
http://www.debian-administration.org/article/377/Routing_for_multiple_uplinks
http://code.google.com/p/muggles/
http://lartc.org/howto/lartc.rpdb.multiple-links.html
http://maltekueppers.de/wp/?p=1346
http://maltekueppers.de/wp/?p=1363
At the moment my routing table looks like:
rtr-0002:/var/log# route -n
Kernel-IP-Routentabelle
Ziel Router Genmask Flags Metric Ref Use
Iface
217.0.111.222 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ppp0
rtr-0002:/var/log#
rtr-0002:/var/log# ip route show
217.0.111.222 dev ppp0 proto kernel scope link src 111.222.333.444
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.1
default dev ppp0 scope link
rtr-0002:/var/log#
rtr-0002:/var/log# ifconfig ppp0
ppp0 Link encap:Punkt-zu-Punkt-Verbindung
inet Adresse:111.222.333.444 P-z-P:217.0.111.222 Maske:255.255.255.255
UP PUNKTZUPUNKT RUNNING NOARP MULTICAST MTU:1492 Metrik:1
RX packets:2885981 errors:0 dropped:0 overruns:0 frame:0
TX packets:2125651 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:3
RX bytes:2957960607 (2.7 GiB) TX bytes:347600931 (331.4 MiB)
nx4-rtr-0002:/var/log#
At the moment I use ppp (pon/poff) dail up.
Not clear thinks are:
- how do 2 PPPoE connections at the same time?
- where do I place the code for multiple routing
(ip route add default scope global nexthop via 1.0.0.2 dev eth1 weight 1 nexthop via 2.0.0.2 eth2 weight 1)
- did this setup runing with SSL or SSH connections? (while the connection is keep alive they must use the same route i think?)
Thanks,
regards Basti