Re: [OT] Good quality hair dryer needed for Squeeze

"The OP should be experienced with soldering multi-layer boards" really why should he be? Are all IT personal hardware fundies as well? I started late in the IT business with a totally different previous vocation, and can do all except put a CPU & mobo and cooler together, anyway lets not carry on with this.

On 13 December 2012 00:22, Ralf Mardorf <ralf.mardorf@alice-dsl.net> wrote:

On Mon, 2012-12-10 at 17:25 -0600, John Hasler wrote:
> Mark writes:
> > Any ideas guys?
>
> You may find that pressing down or prying up on that part of the board
> works as well as does the dryer. Inspect the suspicious area of the
> MOBO carefully with a magnifying glass and then fix the crack or bad
> solder joint.

+1

Use a chopstick to press.

The OP should be experienced with soldering multi-layer boards.
Surface-mounted device aren't an issue, but solder joints might be
plated-through by vias
http://upload.wikimedia.org/wikipedia/commons/thumb/5/57/Via_Types.svg/220px-Via_Types.svg.png . Without experiences the vias can lose their connections.

Hth,
Ralf

--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

Archive: [🔎] 1355350976.2651.23.camel@q" target="_blank">http://lists.debian.org/[🔎] 1355350976.2651.23.camel@q

--
Cheers
Mark

Reply to: