Re: Wheezy Driver for Intel RMS25CB080 RAID Controller
- To: debian-user@lists.debian.org
- Subject: Re: Wheezy Driver for Intel RMS25CB080 RAID Controller
- From: Ron <debian-user@itrefined.com>
- Date: Fri, 28 Dec 2012 17:02:49 -0800 (PST)
- Message-id: <[🔎] 1356742969482-2836241.post@n7.nabble.com>
- In-reply-to: <84F5B2F1-4DB9-45F0-A713-70322AA4F424@salk.edu>
- References: <308BB0D4-703A-4FD9-B4DA-4206203E82DF@salk.edu> <6dbca8d05fab2d28c724d21caef7cda0.squirrel@www.microway.com> <508466EC.3090302@hardwarefreak.com> <E4E101AA-1970-4AE6-BECE-7043B17153BE@salk.edu> <ae927c3c9bcd4ca4c7b9f6e1a4ec86e2.squirrel@www.microway.com> <84F5B2F1-4DB9-45F0-A713-70322AA4F424@salk.edu>
Setting linux kernel boot parameter pci=conf1 allows my Intel RAID
Controller-RMS25PB080 (LSI 2208/Fusion based) to be detected, and the FW to
transition to Ready state. Without this setting the Card FW responds only
with 0xF0000000 Fault (Masked).
I found linux kernel series 3.0.0, properly discovered and used the RAID
card. Things broke in kernel series 3.2.0, onward. So this means in my Intel
s2600 system, using the Intel/LSI card I have confirmed broken PCI discovery
in kernels 3.2 up to current day 3.7.1 kernels.
Details:
Card PCI ID: 1000:005b
Card PCI description: LSI Logic / Symbios Logic MegaRAID SAS 2208
[Thunderbolt] (rev 03) aka Fusion
Card Firmware Version: v23.9.0-0018 (most current to-date)
Card OEM: Intel RAID Module (Card) RMS25PB080 SAS
System Board: s2600CP - E5-2600 Xeon, LGA2011 Socket
System Firmware BIOS level: 01.06.0002 2012/11/15 (most current to-date)
--
View this message in context: http://debian.2.n7.nabble.com/Wheezy-Driver-for-Intel-RMS25CB080-RAID-Controller-tp2783386p2836241.html
Sent from the Debian User mailing list archive at Nabble.com.
Reply to: