Driver ARK3116 don't create /dev/ttyUSB
Hello,
I am trying to use a USB-to-IrDA converter by ARKMICRO (with Debian 5.0
Lenny)
i searched on internet and the appropriate driver should be ark3116 but
the interface isn't recognized and no device /dev/ttyUSB is created.
How can I make this driver recognize this interface to create the device
(/dev/ttyUSB)
After plug the converter the output of dmesg:
usb 3-1: new full speed USB device using uhci_hcd and address 3
[13039.814371] usb 3-1: configuration #0 chosen from 1 choice
[13039.814371] usb 3-1: config 0 descriptor??
[13039.821299] usb 3-1: New USB device found, idVendor=18ec,
idProduct=3118
[13039.821306] usb 3-1: New USB device strings: Mfr=1, Product=3,
SerialNumber=0
[13039.821309] usb 3-1: Product: USB TO IRDA
[13039.821313] usb 3-1: Manufacturer: ARKMICRO
And after modprobe ark3116
[14005.884852] usbserial: USB Serial support registered for ark3116
[14005.884852] usbcore: registered new interface driver ark3116
Anyone know what I should do?
Thanks,
Markos
PS- output of lsusb -v
Bus 003 Device 004: ID 18ec:3118 Arkmicro Technologies Inc. USB to IrDA
adapter [ARK3116T]
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x18ec Arkmicro Technologies Inc.
idProduct 0x3118 USB to IrDA adapter [ARK3116T]
bcdDevice 0.01
iManufacturer 1 ARKMICRO
iProduct 3 USB TO IRDA
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 0
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)
Reply to: