[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: No sound on Wheezy



On Wed, Oct 24, 2012 at 10:06 AM, Andrei POPESCU
<andreimpopescu@gmail.com> wrote:
> On Mi, 24 oct 12, 09:38:08, Artifex Maximus wrote:
>> I am using a Wheezy 64 bit on a machine with integrated audio and ATI
>> 5570 video card with HDMI (but I am using DVI-HDMI converter). Gnome
>> audio find only HDMI audio which I cannot use because of converter. I
>> search on Google find some solution and found how to disable HDMI
>> audio. I add the following to the modprobe
>>
>> blacklist snd_hda_intel
>> blacklist snd_hda_codec_hdmi
>
> Instead of blacklisting I would try to route the audio through the
> non-HDMI "device", if one exists. 'aplay -L' will show you all devices
> to route audio and you can test them one by one with
>
>     speaker-test -c 2 -D <device>

Thanks for your answer. No sound on speaker even speaker-test says so.

# aplay -L
default
    Playback/recording through the PulseAudio sound server
sysdefault:CARD=Intel
    HDA Intel, ALC887-VD Analog
    Default Audio Device
front:CARD=Intel,DEV=0
    HDA Intel, ALC887-VD Analog
    Front speakers
surround40:CARD=Intel,DEV=0
    HDA Intel, ALC887-VD Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
    HDA Intel, ALC887-VD Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
    HDA Intel, ALC887-VD Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
    HDA Intel, ALC887-VD Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
    HDA Intel, ALC887-VD Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Intel,DEV=0
    HDA Intel, ALC887-VD Digital
    IEC958 (S/PDIF) Digital Audio Output

# speaker-test -c 2 -D default

speaker-test 1.0.25

Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 96 to 1048576
Period size range from 32 to 349526
Using max buffer size 1048576
Periods = 4
was set period_size = 262144
was set buffer_size = 1048576
 0 - Front Left
 1 - Front Right
Time per period = 12,492867
 0 - Front Left

# speaker-test -c 2 -D sysdefault

speaker-test 1.0.25

Playback device is sysdefault
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave
Playback open error: -16,Device or resource busy

# speaker-test -c 2 -D front

speaker-test 1.0.25

Playback device is front
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Playback open error: -16,Device or resource busy

Same error for other devices.

As background information. Basically I have problem with my Windows XP
ATI driver with HDMI cable as cannot set overscan right. Therefore I
need to use DVI-HDMI converter. My monitor have audio output and able
to output audio from selected HDMI (I am using my PS3 with that way)
but because of XP driver problem I cannot use pure HDMI for Desktop
PC. My bad but looking for other solution on Debian side. If I am
remember correctly Debian was able to handle overscan perfectly on
pure HDMI setup.

Bye,
a


Reply to: