Re: SATA disk errors
On 12/30/2011 4:37 AM, Tony van der Hoff wrote:
> I'm getting irrregular reports on a Squeeze software raid1 array with
> two 500GB disks like this:
>
> Dec 30 09:53:39 tony-lx kernel: [143496.872684] ata3.00: exception Emask
> 0x10 SAct 0x3 SErr 0x400000 action 0x6 frozen
> Dec 30 09:53:39 tony-lx kernel: [143496.872694] ata3.00: irq_stat
> 0x08000000, interface fatal error
> Dec 30 09:53:39 tony-lx kernel: [143496.872703] ata3: SError: { Handshk }
> Dec 30 09:53:39 tony-lx kernel: [143496.872710] ata3.00: failed command:
> WRITE FPDMA QUEUED
> Dec 30 09:53:39 tony-lx kernel: [143496.872725] ata3.00: cmd
> 61/60:00:80:d0:56/00:00:13:00:00/40 tag 0 ncq 49152 out
> Dec 30 09:53:39 tony-lx kernel: [143496.872729] res
> 40/00:08:20:9b:5a/00:00:13:00:00/40 Emask 0x10 (ATA bus error)
> Dec 30 09:53:39 tony-lx kernel: [143496.872736] ata3.00: status: { DRDY }
> Dec 30 09:53:39 tony-lx kernel: [143496.872742] ata3.00: failed command:
> WRITE FPDMA QUEUED
> Dec 30 09:53:39 tony-lx kernel: [143496.872755] ata3.00: cmd
> 61/20:08:20:9b:5a/00:00:13:00:00/40 tag 1 ncq 16384 out
> Dec 30 09:53:39 tony-lx kernel: [143496.872758] res
> 40/00:08:20:9b:5a/00:00:13:00:00/40 Emask 0x10 (ATA bus error)
> Dec 30 09:53:39 tony-lx kernel: [143496.872765] ata3.00: status: { DRDY }
> Dec 30 09:53:39 tony-lx kernel: [143496.872776] ata3: hard resetting link
> Dec 30 09:53:40 tony-lx kernel: [143497.356148] ata3: SATA link up 6.0
> Gbps (SStatus 133 SControl 300)
> Dec 30 09:53:40 tony-lx kernel: [143497.358983] ata3.00: configured for
> UDMA/133
> Dec 30 09:53:40 tony-lx kernel: [143497.359005] ata3: EH complete
>
> Can anyone please enlighten me to what it means; Am I about to lose a disk?
Why haven't you looked at the SMART data for the disk on ATA3? Normally
that will answer your question directly above.
--
Stan
Reply to: