Re: Hard drive failing? [OT]
On 4 October 2011 20:00, Henrique de Moraes Holschuh <hmh@debian.org> wrote:
> On Tue, 04 Oct 2011, Mark Panen wrote:
>> I am running "smartctl -t long /dev/xxx" how do i get the output of
>> the log file once it's finished? man page is unclear.
>
> smartctl --xall will tell you everything and then some. If it doesn't
> work, use smartctl -a.
>
> You probably also want to use "-d sat" on all smartctl commands if it is
> an directly attached ATA device (i.e. not USB, and not connected through
> a hardware RAID card).
>
> --
> "One disk to rule them all, One disk to find them. One disk to bring
> them all and in the darkness grind them. In the Land of Redmond
> where the shadows lie." -- The Silicon Valley Tarot
> Henrique Holschuh
smartctl -l selftest /dev/sdc1
smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 17291
1019262483
# 2 Short offline Completed: read failure 90% 17291
1019262483
# 3 Extended offline Completed: read failure 90% 17290
1019262483
# 4 Extended offline Completed: read failure 90% 17267
1019262483
# 5 Extended offline Completed: read failure 90% 17267
1304384272
# 6 Short offline Completed: read failure 90% 17267
1019262483
# 7 Extended offline Completed: read failure 90% 14560
1019262483
# 8 Extended offline Completed: read failure 90% 14511
1019262483
--
Cheers
Mark
Reply to: