Re: Re: Debian-6.0.2.1-i386 and Intel 82845G - install fine,no screen on boot
Thanks for the reply Camaleón,
It's been a few years since I had the need to solve software problems.
I was not subscribed to this list so excuse the cut-and-paste - keeping
the contents of the problem together
I did a fresh rebuild from " debian-6.0.2.1-i386 " - Too many mods to the old install.
As before, there is no video.
An ssh connection was made from a remote machine and I can now talk to it.
(forgot to delete an entry in the ~/.ssh/known_hosts file for the ip address.)
I had the same problem with "lenny" but I could connect to the machine
through a terminal login - something that has been eliminated with "squeeze".
So you have a video issue?
Yes, I have a video problem. The problem did not exist with "etch" but did
with "lenny" and appears to have continued on with "squeeze". There may
be some clues in the "etch" distribution as how to solve this one - or
maybe not.
To make the machine usable, I need to figure out how to connect to the
"squeeze" machine throught a local terminal connection. The Xwindow
connection may not be an option as Intel has discontinued making the chip
some years ago and there may be no interest
I've attached the " Xorg.0.log " and the " dmesg" output. Other than the
one line in "Xorg.0.log", I don't see a problem.
(WW) intel(0): cannot enable DRI2 whilst forcing software fallbacks
I don't know what the above error is saying.
I haven't used KMS, but after seeing the statement on
https://wiki.archlinux.org/index.php/Kernel_Mode_Setting
looks like I have some research to do.
Thanks again for your comments. Open for any others if you think of them,
Ed
On Mon, 11 Jul 2011 15:53:13 -0700, Ed Siegner wrote:
I installed debian-6.0.2.1-i386 without problems on a Giga-Byte TA4
machine which uses an Intel 82845G video chip. After the installation,
the system boots up but during booting, video is lost and no login
prompt is received. I think the machine is running but there's no way to
connect into it as ctrl-alt-Fx no longer works or ctrl-alt-Backspace. It
does respond to "ping".
You can also ssh to it from another machine to debug it further.
I have several of these TA4s. Another TA4 has "etch" running on it with
no problems.
There is no problems accessing the "squeeze" machine using "rescue".
Downloaded all the files in /var/log through the "rescue" access, but
found nothing, or did recognize anything, that gave a clue to the
problem(s).
I've found other postings on the Intel 82845G chip - BIOS memory set too
low, but BIOS is fine with 8MB. Other postings didn't seem resolved but
were a little different. I've attached the listing of "dmesg" and "lspic
-v" - others available on request. Has anyone seen this problem? Did I
miss a solution? Any input will be appreciated.
(...)
So you have a video issue? Are you are running X? You may want to try to
disbale KMS but as you are using an intel VGA I'm not sure if that will
work nor what fallback mode would load :-?
You can also review your "/var/log/Xorg.0.log" go get additional
information.
Greetings,
--
Camaleón
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.29-dsa-ia32 i686 Debian
Current Operating System: Linux deb6 2.6.32-5-686 #1 SMP Mon Jun 13 04:13:06 UTC 2011 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=dcbafd16-7eee-494c-b9b4-d3f982caae7d ro quiet
Build Date: 19 February 2011 02:37:36PM
xorg-server 2:1.7.7-13 (Cyril Brulebois <kibi@debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jul 12 16:52:13 2011
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x81ecca0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2562:1458:2562 Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device rev 3, Mem @ 0xe0000000/134217728, 0xe8100000/524288
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched intel as autoconfigured driver 0
(==) Matched vesa as autoconfigured driver 1
(==) Matched fbdev as autoconfigured driver 2
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.13.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 0.4.2
ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 00@00:02:0
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.0.2
ABI class: X.Org Video Driver, version 6.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 845G
(--) intel(0): Chipset: "845G"
(==) intel(0): Shadow buffer enabled, GPU acceleration disabled.
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): video overlay key set to 0x101fe
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output DVI1 has no monitor section
(II) intel(0): EDID for output VGA1
(II) intel(0): Not using default mode "640x350" (vrefresh out of range)
(II) intel(0): Not using default mode "320x175" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x400" (vrefresh out of range)
(II) intel(0): Not using default mode "320x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "720x400" (vrefresh out of range)
(II) intel(0): Not using default mode "360x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (hsync out of range)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (hsync out of range)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (hsync out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (hsync out of range)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (vrefresh out of range)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (hsync out of range)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (vrefresh out of range)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (hsync out of range)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "832x624" (vrefresh out of range)
(II) intel(0): Not using default mode "416x312" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (hsync out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (hsync out of range)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1440x900" (hsync out of range)
(II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1024" (hsync out of range)
(II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (hsync out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (hsync out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1080" (hsync out of range)
(II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1200" (hsync out of range)
(II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (hsync out of range)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output VGA1
(II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): EDID for output DVI1
(II) intel(0): Manufacturer: HIT Model: 6008 Serial#: 9446
(II) intel(0): Year: 2008 Week: 4
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 41 vert.: 26
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.643 redY: 0.347 greenX: 0.286 greenY: 0.599
(II) intel(0): blueX: 0.142 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported established timings:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x864@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported standard timings:
(II) intel(0): #0: hsize: 1440 vsize 900 refresh: 75 vid: 3989
(II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #3: hsize: 1280 vsize 720 refresh: 60 vid: 49281
(II) intel(0): #4: hsize: 1280 vsize 800 refresh: 75 vid: 3969
(II) intel(0): #5: hsize: 1152 vsize 921 refresh: 76 vid: 36977
(II) intel(0): #6: hsize: 1400 vsize 1050 refresh: 75 vid: 20368
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 89.0 MHz Image Size: 410 x 257 mm
(II) intel(0): h_active: 1440 h_sync: 1488 h_sync_end 1520 h_blank_end 1600 h_border: 0
(II) intel(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 926 v_border: 0
(II) intel(0): Monitor name: X91W D-sub
(II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 84 kHz, PixClock max 165 MHz
(II) intel(0): Serial No: X90WI81L09446
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0021340860e6240000
(II) intel(0): 0412010308291a78eab565a458499924
(II) intel(0): 115054bfef80950f8180814081c0810f
(II) intel(0): 7190904f0101c422a0a050841a303020
(II) intel(0): 36009a011100001e000000fc00583931
(II) intel(0): 5720442d7375620a2020000000fd0038
(II) intel(0): 4c1f5410000a202020202020000000ff
(II) intel(0): 00583930574938314c303934343600a8
(II) intel(0): Printing probed modes for output DVI1
(II) intel(0): Modeline "1440x900"x60.1 89.00 1440 1488 1520 1600 900 903 909 926 +hsync +vsync (55.6 kHz)
(II) intel(0): Modeline "1400x1050"x74.9 156.00 1400 1504 1648 1896 1050 1053 1057 1099 -hsync +vsync (82.3 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x921"x76.0 113.52 1152 1224 1352 1552 921 922 925 962 -hsync +vsync (73.1 kHz)
(II) intel(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
(II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output DVI1 connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output DVI1 using initial mode 1440x900
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): Kernel page flipping support detected, enabling
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
(==) Depth 24 pixmap format is 32 bpp
(==) intel(0): VideoRam: 131072 KB
(WW) intel(0): cannot enable DRI2 whilst forcing software fallbacks
(II) intel(0): Allocated new frame buffer 1472x900 stride 8192, tiled
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(II) put_image
(II) get_image
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Failed
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) intel(0): Setting screen physical size to 380 x 238
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Sleep Button (/dev/input/event2)
(**) Sleep Button: Applying InputClass "evdev keyboard catchall"
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event2"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event5)
(**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
(**) ImExPS/2 Generic Explorer Mouse: always reports core events
(**) ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event5"
(II) ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
(II) ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
(II) ImExPS/2 Generic Explorer Mouse: Found relative axes
(II) ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
(II) ImExPS/2 Generic Explorer Mouse: Configuring as mouse
(**) ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
(**) ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE)
(II) ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
(II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device PC Speaker (/dev/input/event4)
(II) No input driver/identifier specified (ignoring)
(II) intel(0): EDID vendor "HIT", prod id 24584
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1440x900"x0.0 89.00 1440 1488 1520 1600 900 903 909 926 +hsync +vsync (55.6 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz)
(II) intel(0): Modeline "1152x921"x76.0 113.47 1152 1224 1352 1552 921 922 925 962 -hsync +vsync (73.1 kHz)
(II) intel(0): Modeline "1400x1050"x0.0 156.00 1400 1504 1648 1896 1050 1053 1057 1099 -hsync +vsync (82.3 kHz)
(II) intel(0): EDID vendor "HIT", prod id 24584
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1440x900"x0.0 89.00 1440 1488 1520 1600 900 903 909 926 +hsync +vsync (55.6 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz)
(II) intel(0): Modeline "1152x921"x76.0 113.47 1152 1224 1352 1552 921 922 925 962 -hsync +vsync (73.1 kHz)
(II) intel(0): Modeline "1400x1050"x0.0 156.00 1400 1504 1648 1896 1050 1053 1057 1099 -hsync +vsync (82.3 kHz)
(II) intel(0): EDID vendor "HIT", prod id 24584
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1440x900"x0.0 89.00 1440 1488 1520 1600 900 903 909 926 +hsync +vsync (55.6 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz)
(II) intel(0): Modeline "1152x921"x76.0 113.47 1152 1224 1352 1552 921 922 925 962 -hsync +vsync (73.1 kHz)
(II) intel(0): Modeline "1400x1050"x0.0 156.00 1400 1504 1648 1896 1050 1053 1057 1099 -hsync +vsync (82.3 kHz)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-35) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Jun 13 04:13:06 UTC 2011
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7f0000 (usable)
[ 0.000000] BIOS-e820: 000000003f7f0000 - 000000003f7f3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f7f3000 - 000000003f800000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f800000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x3f7f0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03F800000 mask FFF800000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000
[ 0.000000] RAMDISK: 2f1f6000 - 2fa33253
[ 0.000000] ACPI: RSDP 000f62d0 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 3f7f3000 0002C (v01 GBT AWRDACPI 42302E31 AWRD 01010101)
[ 0.000000] ACPI: FACP 3f7f3040 00074 (v01 GBT AWRDACPI 42302E31 AWRD 01010101)
[ 0.000000] ACPI: DSDT 3f7f30c0 03356 (v01 GBT AWRDACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 3f7f0000 00040
[ 0.000000] ACPI: APIC 3f7f6440 00068 (v01 GBT AWRDACPI 42302E31 AWRD 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 131MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00009000 - 0000fe80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014c8bb4] TEXT DATA BSS ==> [0001000000 - 00014c8bb4]
[ 0.000000] #4 [002f1f6000 - 002fa33253] RAMDISK ==> [002f1f6000 - 002fa33253]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [00014c9000 - 00014cf092] BRK ==> [00014c9000 - 00014cf092]
[ 0.000000] #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
[ 0.000000] found SMP MP-table at [c00f4a80] f4a80
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0003f7f0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f7f0
[ 0.000000] On node 0 totalpages: 259983
[ 0.000000] free_area_init_node: node 0, pgdat c13b08a0, node_mem_map c14d1000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 264 pages used for memmap
[ 0.000000] HighMem zone: 33514 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s34328 r0 d23016 u2097152
[ 0.000000] pcpu-alloc: s34328 r0 d23016 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257951
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=dcbafd16-7eee-494c-b9b4-d3f982caae7d ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:0003f7f0)
[ 0.000000] Memory: 1016840k/1040320k available (2504k kernel code, 22460k reserved, 1313k data, 380k init, 135112k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13bb000 - 0xc141a000 ( 380 kB)
[ 0.000000] .data : 0xc1272001 - 0xc13ba4c0 (1313 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1272001 (2504 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2799.213 MHz processor.
[ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 5598.42 BogoMIPS (lpj=11196852)
[ 0.004031] Security Framework initialized
[ 0.004042] SELinux: Disabled at boot.
[ 0.004052] Mount-cache hash table entries: 512
[ 0.004253] Initializing cgroup subsys ns
[ 0.004260] Initializing cgroup subsys cpuacct
[ 0.004266] Initializing cgroup subsys devices
[ 0.004270] Initializing cgroup subsys freezer
[ 0.004273] Initializing cgroup subsys net_cls
[ 0.004309] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.004312] CPU: L2 cache: 512K
[ 0.004316] CPU: Hyper-Threading is disabled
[ 0.004321] mce: CPU supports 4 MCE banks
[ 0.004334] CPU0: Thermal monitoring enabled (TM1)
[ 0.004352] Performance Events: no PMU driver, software events only.
[ 0.004361] Checking 'hlt' instruction... OK.
[ 0.020451] SMP alternatives: switching to UP code
[ 0.026507] ACPI: Core revision 20090903
[ 0.032104] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.032584] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072739] CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
[ 0.076001] Brought up 1 CPUs
[ 0.076001] Total of 1 processors activated (5598.42 BogoMIPS).
[ 0.076001] CPU0 attaching NULL sched-domain.
[ 0.076001] devtmpfs: initialized
[ 0.076001] regulator: core version 0.5
[ 0.076001] NET: Registered protocol family 16
[ 0.076001] ACPI: bus type pci registered
[ 0.098956] PCI: PCI BIOS revision 2.10 entry at 0xf9b20, last bus=1
[ 0.098958] PCI: Using configuration type 1 for base access
[ 0.099381] bio: create slab <bio-0> at 0
[ 0.099862] ACPI: EC: Look up EC in DSDT
[ 0.104166] ACPI: Interpreter enabled
[ 0.104172] ACPI: (supports S0 S1 S4 S5)
[ 0.104199] ACPI: Using IOAPIC for interrupt routing
[ 0.108094] ACPI: No dock devices found.
[ 0.108210] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.108261] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.108335] pci 0000:00:02.0: reg 10 32bit mmio pref: [0xe0000000-0xe7ffffff]
[ 0.108343] pci 0000:00:02.0: reg 14 32bit mmio: [0xe8100000-0xe817ffff]
[ 0.108450] pci 0000:00:1d.0: reg 20 io port: [0xd800-0xd81f]
[ 0.108506] pci 0000:00:1d.1: reg 20 io port: [0xd000-0xd01f]
[ 0.108561] pci 0000:00:1d.2: reg 20 io port: [0xd400-0xd41f]
[ 0.108617] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe8180000-0xe81803ff]
[ 0.108670] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.108676] pci 0000:00:1d.7: PME# disabled
[ 0.108726] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[ 0.108728] * this clock source is slow. If you are sure your timer does not have
[ 0.108729] * this bug, please use "acpi_pm_good" to disable the workaround
[ 0.108773] pci 0000:00:1f.0: quirk: region 4000-407f claimed by ICH4 ACPI/GPIO/TCO
[ 0.108779] pci 0000:00:1f.0: quirk: region 4080-40bf claimed by ICH4 GPIO
[ 0.108804] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.108812] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.108819] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.108827] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.108835] pci 0000:00:1f.1: reg 20 io port: [0xf000-0xf00f]
[ 0.108842] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.108895] pci 0000:00:1f.3: reg 20 io port: [0x5000-0x501f]
[ 0.108941] pci 0000:00:1f.5: reg 10 io port: [0xe000-0xe0ff]
[ 0.108948] pci 0000:00:1f.5: reg 14 io port: [0xe400-0xe43f]
[ 0.108956] pci 0000:00:1f.5: reg 18 32bit mmio: [0xe8181000-0xe81811ff]
[ 0.108964] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xe8182000-0xe81820ff]
[ 0.108994] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.108999] pci 0000:00:1f.5: PME# disabled
[ 0.109046] pci 0000:01:05.0: reg 10 io port: [0xc000-0xc0ff]
[ 0.109054] pci 0000:01:05.0: reg 14 32bit mmio: [0xe8000000-0xe80000ff]
[ 0.109094] pci 0000:01:05.0: supports D1 D2
[ 0.109097] pci 0000:01:05.0: PME# supported from D1 D2 D3hot D3cold
[ 0.109102] pci 0000:01:05.0: PME# disabled
[ 0.109143] pci 0000:01:08.0: reg 10 32bit mmio: [0xe8001000-0xe80017ff]
[ 0.109151] pci 0000:01:08.0: reg 14 io port: [0xc400-0xc47f]
[ 0.109191] pci 0000:01:08.0: supports D2
[ 0.109194] pci 0000:01:08.0: PME# supported from D2 D3hot D3cold
[ 0.109198] pci 0000:01:08.0: PME# disabled
[ 0.109236] pci 0000:00:1e.0: transparent bridge
[ 0.109241] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
[ 0.109247] pci 0000:00:1e.0: bridge 32bit mmio: [0xe8000000-0xe80fffff]
[ 0.109259] pci_bus 0000:00: on NUMA node 0
[ 0.109264] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.109381] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.115680] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.115793] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.115905] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.116032] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.116143] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.116255] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.116365] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.116478] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *6 7 10 11 12 14 15)
[ 0.116600] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.116608] vgaarb: loaded
[ 0.116707] PCI: Using ACPI for IRQ routing
[ 0.116876] Switching to clocksource tsc
[ 0.118484] pnp: PnP ACPI init
[ 0.118508] ACPI: bus type pnp registered
[ 0.120173] pnp: PnP ACPI: found 11 devices
[ 0.120176] ACPI: ACPI bus type pnp unregistered
[ 0.120182] PnPBIOS: Disabled by ACPI PNP
[ 0.120205] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.120209] system 00:02: ioport range 0x290-0x29f has been reserved
[ 0.120212] system 00:02: ioport range 0x800-0x805 has been reserved
[ 0.155029] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.155034] pci 0000:00:1e.0: IO window: 0xc000-0xcfff
[ 0.155040] pci 0000:00:1e.0: MEM window: 0xe8000000-0xe80fffff
[ 0.155044] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.155060] pci 0000:00:1e.0: setting latency timer to 64
[ 0.155067] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.155070] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.155073] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.155077] pci_bus 0000:01: resource 1 mem: [0xe8000000-0xe80fffff]
[ 0.155080] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.155096] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[ 0.155140] NET: Registered protocol family 2
[ 0.155251] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.155708] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.156885] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.157648] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.157653] TCP reno registered
[ 0.157823] NET: Registered protocol family 1
[ 0.157869] pci 0000:00:02.0: Boot video device
[ 0.158030] Unpacking initramfs...
[ 0.469470] Freeing initrd memory: 8436k freed
[ 0.484029] audit: initializing netlink socket (disabled)
[ 0.484052] type=2000 audit(1310514718.483:1): initialized
[ 0.487063] highmem bounce pool size: 64 pages
[ 0.487070] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.488684] VFS: Disk quotas dquot_6.5.2
[ 0.488748] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.488839] msgmni has been set to 1739
[ 0.489068] alg: No test for stdrng (krng)
[ 0.489133] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.489137] io scheduler noop registered
[ 0.489139] io scheduler anticipatory registered
[ 0.489141] io scheduler deadline registered
[ 0.489182] io scheduler cfq registered (default)
[ 0.489400] isapnp: Scanning for PnP cards...
[ 0.843283] isapnp: No Plug & Play device found
[ 0.844898] Linux agpgart interface v0.103
[ 0.844974] agpgart-intel 0000:00:00.0: Intel 830M Chipset
[ 0.845179] agpgart-intel 0000:00:00.0: detected 8060K stolen memory
[ 0.846958] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
[ 0.847035] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.847137] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.847546] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.847707] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.850995] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.851003] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.851114] mice: PS/2 mouse device common for all mice
[ 0.851165] rtc_cmos 00:04: RTC can wake from S4
[ 0.851216] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.851251] rtc0: alarms up to one month, 242 bytes nvram
[ 0.851264] cpuidle: using governor ladder
[ 0.851267] cpuidle: using governor menu
[ 0.851273] No iBFT detected.
[ 0.851733] TCP cubic registered
[ 0.851872] NET: Registered protocol family 10
[ 0.852744] Mobile IPv6
[ 0.852748] NET: Registered protocol family 17
[ 0.852768] Using IPI No-Shortcut mode
[ 0.852872] PM: Resume from disk failed.
[ 0.852892] registered taskstats version 1
[ 0.853108] rtc_cmos 00:04: setting system clock to 2011-07-12 23:51:59 UTC (1310514719)
[ 0.853134] Initalizing network drop monitor service
[ 0.853168] Freeing unused kernel memory: 380k freed
[ 0.853699] Write protecting the kernel text: 2508k
[ 0.853736] Write protecting the kernel read-only data: 904k
[ 0.879549] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.882671] udev[46]: starting version 164
[ 1.108403] SCSI subsystem initialized
[ 1.128979] usbcore: registered new interface driver usbfs
[ 1.129173] usbcore: registered new interface driver hub
[ 1.129405] usbcore: registered new device driver usb
[ 1.137879] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.137911] 8139cp 0000:01:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.162888] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.162953] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 1.162984] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.162989] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.163025] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.166953] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 1.166973] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe8180000
[ 1.179669] firewire_ohci 0000:01:08.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.180138] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.180174] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.180178] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.180181] usb usb1: Product: EHCI Host Controller
[ 1.180184] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.180186] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.180296] usb usb1: configuration #1 chosen from 1 choice
[ 1.180336] hub 1-0:1.0: USB hub found
[ 1.180349] hub 1-0:1.0: 6 ports detected
[ 1.183054] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.183129] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.183141] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.183145] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.183164] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.183202] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000d800
[ 1.183247] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.183250] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.183253] usb usb2: Product: UHCI Host Controller
[ 1.183256] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.183258] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.183363] usb usb2: configuration #1 chosen from 1 choice
[ 1.183404] hub 2-0:1.0: USB hub found
[ 1.183413] hub 2-0:1.0: 2 ports detected
[ 1.183475] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.183483] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.183487] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.183496] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.183525] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d000
[ 1.183569] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.183572] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.183575] usb usb3: Product: UHCI Host Controller
[ 1.183578] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.183580] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.183651] usb usb3: configuration #1 chosen from 1 choice
[ 1.183685] hub 3-0:1.0: USB hub found
[ 1.183694] hub 3-0:1.0: 2 ports detected
[ 1.183748] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.183756] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.183760] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.183769] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.183798] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400
[ 1.183837] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.183840] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.183843] usb usb4: Product: UHCI Host Controller
[ 1.183846] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.183848] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.183916] usb usb4: configuration #1 chosen from 1 choice
[ 1.183949] hub 4-0:1.0: USB hub found
[ 1.183960] hub 4-0:1.0: 2 ports detected
[ 1.184779] 8139too Fast Ethernet driver 0.9.28
[ 1.184864] libata version 3.00 loaded.
[ 1.189808] ata_piix 0000:00:1f.1: version 2.13
[ 1.189830] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.189888] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.191190] scsi0 : ata_piix
[ 1.192098] scsi1 : ata_piix
[ 1.193094] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.193098] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.256009] firewire_ohci: Added fw-ohci device 0000:01:08.0, OHCI version 1.0
[ 1.256131] 8139too 0000:01:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.257249] eth0: RealTek RTL8139 at 0xc000, 00:0d:61:76:33:70, IRQ 21
[ 1.356432] ata1.00: ATA-7: FUJITSU MHV2120AH, 000000A0, max UDMA/100
[ 1.356438] ata1.00: 234441648 sectors, multi 16: LBA
[ 1.356465] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 1.372321] ata1.00: configured for UDMA/33
[ 1.372452] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2120A 0000 PQ: 0 ANSI: 5
[ 1.386340] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.386408] sd 0:0:0:0: [sda] Write Protect is off
[ 1.386412] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.386440] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.386616] sda: sda1 sda2 < sda5 >
[ 1.457700] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.734632] PM: Starting manual resume from disk
[ 1.734637] PM: Resume from partition 8:5
[ 1.734639] PM: Checking hibernation image.
[ 1.735001] PM: Error -22 checking image file
[ 1.735004] PM: Resume from disk failed.
[ 1.756148] firewire_core: created device fw0: GUID 00000d6100776490, S400
[ 1.784932] kjournald starting. Commit interval 5 seconds
[ 1.784946] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.607966] udev[249]: starting version 164
[ 4.268521] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 4.268533] ACPI: Power Button [PWRB]
[ 4.269177] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 4.269194] ACPI: Sleep Button [SLPB]
[ 4.269389] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.269395] ACPI: Power Button [PWRF]
[ 4.298433] intel_rng: FWH not detected
[ 4.331505] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.507082] processor LNXCPU:00: registered as cooling_device0
[ 4.515266] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 4.520431] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.609637] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.705257] [drm] Initialized drm 1.1.0 20060810
[ 4.922290] parport_pc 00:08: reported by Plug and Play ACPI
[ 4.922334] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 5.041618] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.041625] i915 0000:00:02.0: setting latency timer to 64
[ 5.051193] [drm] set up 15M of stolen space
[ 5.064893] [drm] initialized overlay support
[ 5.745180] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
[ 5.812629] Console: switching to colour frame buffer device 180x56
[ 5.819489] fb0: inteldrmfb frame buffer device
[ 5.819491] registered panic notifier
[ 5.819702] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.024621] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 6.024660] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 6.348018] intel8x0_measure_ac97_clock: measured 52341 usecs (2522 samples)
[ 6.348023] intel8x0: clocking to 48000
[ 7.322294] Adding 2002936k swap on /dev/sda5. Priority:-1 extents:1 across:2002936k
[ 7.500142] EXT3 FS on sda1, internal journal
[ 7.692362] loop: module loaded
[ 9.261988] fuse init (API version 7.13)
[ 11.942814] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 15.025465] Bluetooth: Core ver 2.15
[ 15.028295] NET: Registered protocol family 31
[ 15.028298] Bluetooth: HCI device and connection manager initialized
[ 15.028302] Bluetooth: HCI socket layer initialized
[ 15.168804] Bluetooth: L2CAP ver 2.14
[ 15.168808] Bluetooth: L2CAP socket layer initialized
[ 15.275961] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.275965] Bluetooth: BNEP filters: protocol multicast
[ 15.306641] Bridge firewalling registered
[ 15.624273] [drm:edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 3
[ 15.624280] [drm:edid_is_valid] *ERROR* Raw EDID:
[ 15.624284] <3>00 ff ff ff ff ff ff 00 21 34 08 60 e6 24 00 00 ........!4.`.$..
[ 15.624288] <3>04 13 01 03 08 29 1a 78 ea b5 65 a4 58 49 99 24 .....).x..e.XI.$
[ 15.624291] <3>11 50 54 bf ef 80 95 0f 81 80 81 40 81 c0 81 0f .PT........@....
[ 15.624294] <3>71 90 90 4f 01 01 c4 22 a0 a0 50 84 1a 30 30 20 q..O..."..P..00
[ 15.624297] <3>36 00 9a 01 11 00 00 1e 00 00 00 fc 00 5a 39 31 6............Z91
[ 15.624300] <3>57 20 44 2d 73 75 62 0a 20 20 00 00 00 fd 00 38 W D-sub. .....8
[ 15.624303] <3>4c 1f 54 10 00 0a 20 20 20 20 20 20 00 00 00 ff L.T... ....
[ 15.624306] <3>00 58 39 30 57 49 38 31 4c 30 39 34 34 36 00 a8 .X90WI81L09446..
[ 15.624309]
[ 15.785840] Bluetooth: SCO (Voice Link) ver 0.6
[ 15.785845] Bluetooth: SCO socket layer initialized
[ 15.946740] [drm:edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 128
[ 15.946746] [drm:edid_is_valid] *ERROR* Raw EDID:
[ 15.946750] <3>00 ff ff ff ff ff ff 00 21 34 08 60 e6 24 00 00 ........!4.`.$..
[ 15.946754] <3>04 12 01 03 08 29 1a 78 ea b5 65 a4 58 49 99 24 .....).x..e.XI.$
[ 15.946757] <3>11 50 54 bf ef 80 95 0f 81 80 81 40 81 c0 81 8f .PT........@....
[ 15.946760] <3>71 90 90 4f 01 01 c4 22 a0 a0 50 84 1a 30 30 20 q..O..."..P..00
[ 15.946763] <3>36 00 9a 01 11 00 00 1e 00 00 00 fc 00 58 39 31 6............X91
[ 15.946767] <3>57 20 44 2d 73 75 62 0a 20 20 00 00 00 fd 00 38 W D-sub. .....8
[ 15.946770] <3>4c 1f 54 10 00 0a 20 20 20 20 20 20 00 00 00 ff L.T... ....
[ 15.946773] <3>00 58 39 30 57 49 38 31 4c 30 39 34 34 36 00 a8 .X90WI81L09446..
[ 15.946775]
[ 17.507017] lp0: using parport0 (interrupt-driven).
[ 17.555736] ppdev: user-space parallel port driver
[ 21.104401] [drm:edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 24
[ 21.104407] [drm:edid_is_valid] *ERROR* Raw EDID:
[ 21.104412] <3>00 ff ff ff ff ff ff 00 21 34 08 60 e6 24 00 00 ........!4.`.$..
[ 21.104415] <3>04 12 01 03 08 29 1a 78 ea b5 65 a4 58 49 99 24 .....).x..e.XI.$
[ 21.104418] <3>11 50 54 bf ef 80 95 0f 81 80 81 40 81 c0 81 0f .PT........@....
[ 21.104421] <3>71 90 90 4f 01 01 c4 22 a0 a0 50 84 1a 38 30 20 q..O..."..P..80
[ 21.104425] <3>36 00 9a 01 11 00 00 1e 00 00 00 fc 00 58 39 31 6............X91
[ 21.104429] <3>57 20 44 2d 73 75 62 0a 20 20 00 00 00 fd 00 38 W D-sub. .....8
[ 21.104432] <3>4c 1f 54 10 00 0a 20 20 20 20 20 20 00 00 00 ff L.T... ....
[ 21.104436] <3>00 58 39 30 57 49 38 31 4c 30 39 34 34 36 10 a8 .X90WI81L09446..
[ 21.104438]
[ 22.292009] eth0: no IPv6 routers present
Reply to: