[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: How select the access point manually in a wireless network?



> It may not be possible if the connection quality is too low. What does
> 'iwpriv scan' say when you are in the middle?


Hi Brian,
iwpriv scan? maybe you mean 'iwlist scan'
I can see booth access points in the list:

[root@rocha-ar /]# iwlist eth1 scan
eth1      Scan completed :
          Cell 01 - Address: 00:22:0C:94:CD:10
                    ESSID:"TCORP"
                    Mode:Managed
                    Frequency:2.417 GHz (Channel 2)
                    Quality:5/5  Signal level:-46 dBm  Noise level:-92 dBm
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : 802.1x
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : TKIP
                        Authentication Suites (1) : 802.1x
                    Encryption key:on
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
                              11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
                              48 Mb/s; 54 Mb/s
...
          Cell 05 - Address: 00:26:52:D9:7B:D0
                    ESSID:"TCORP"
                    Mode:Managed
                    Frequency:2.422 GHz (Channel 3)
                    Quality:1/5  Signal level:-81 dBm  Noise level:-86 dBm
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : 802.1x
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : TKIP
                        Authentication Suites (1) : 802.1x
                    Encryption key:on
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
                              11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
                              48 Mb/s; 54 Mb/s
...
          Cell 08 - Address: 00:3A:99:0C:27:30
                    ESSID:"TCORP"
                    Mode:Managed
                    Frequency:2.447 GHz (Channel 8)
                    Quality:4/5  Signal level:-67 dBm  Noise level:-85 dBm
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : 802.1x
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : TKIP
                        Authentication Suites (1) : 802.1x
                    Encryption key:on
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
                              11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
                              48 Mb/s; 54 Mb/s

> You could try setting the freq/channel before the ap.

I try setting the freq/channel, but does not work
"iwconfig eth1 channel 2 freq 2.417G ap 00:3A:99:0C:27:30 commit"



Reply to: