M4A88TD-V EVO/USB3 Realtek ALC892 - No sound(mostly)
This motherboard used to work under a previous install of Debian, I
Updated to Squeeze through a fresh install (hard drive replacement).
Ever since I have been unable to get the sound to work.
With the speakers plugged in to the speaker port I get random pops
coming from the speakers, Clicking on mute and un-mute reproduces
these pops. I am able to control the mic inputs so that i can turn up
and down the mic volume on t\both the front and rear inputs and hear
the resulting noises.
This version of the chipset has a 6 connector audio + spdif + HDMI on
the rear + 2 ports on the front.
Unsure what to provide at the moment, so here are some of the common
outputs to hopefully help.
root@gemini:~# alsactl init
Unknown hardware: "HDA-Intel" "Realtek ALC892"
"HDA:10ec0892,1043841b,00100302" "0x1043" "0x841b"
Hardware is initialized using a guess method
root@gemini:~#
adrian@gemini:~$ cat /proc/asound/cards
0 [SB ]: HDA-Intel - HDA ATI SB
HDA ATI SB at 0xfe6f4000 irq 16
1 [HDMI ]: HDA-Intel - HDA ATI HDMI
HDA ATI HDMI at 0xfe8e8000 irq 19
adrian@gemini:~$
adrian@gemini:~$ lspci -vv
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
Subsystem: ASUSTeK Computer Inc. Device 841b
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin ? routed to IRQ 16
Region 0: Memory at fe6f4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: HDA Intel
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host
controller (rev 40)
Subsystem: ASUSTeK Computer Inc. Device 8443
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Hope this helps, I have googled and tried everything i can think of,
Adrian
01:05.1 Audio device: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200]
Subsystem: ASUSTeK Computer Inc. Device 843e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at fe8e8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: HDA Intel
--
24x7x365 != 24x7x52 Stupid or bad maths?
<erno> hm. I've lost a machine.. literally _lost_. it responds to
ping, it works completely, I just can't figure out where in my
apartment it is.
Reply to: