Re: dhcpd tftp boot server configuration
--- bss@iguanasuicide.net wrote:
From: "Boyd Stephen Smith Jr." <bss@iguanasuicide.net>
To: debian-user@lists.debian.org
Cc: urpion@linuxwaves.com
Subject: Re: dhcpd tftp boot server configuration
Date: Sun, 27 Feb 2011 12:36:20 -0600
In <20110225224107.36EA4EE7@resin06.mta.everyone.net>, urpion urpion wrote:
><DIV style="font-family:Arial, sans-serif; font-size:10pt;">Hello! I need
[...]
>declaration?<DIV><BR></DIV><DIV>here's what I got in
>/etc/dhcp/dhcpd.conf</DIV><DIV><BR></DIV><DIV><DIV>#</DIV><DIV># Sample
>configuration file for ISC dhcpd for
>Debian</DIV><DIV>#</DIV><DIV>#</DIV><DIV><BR></DIV><DIV># The
I can't understand you through the HTML. Also, it is against list policy to
post in HTML.
--
Boyd Stephen Smith Jr. ,= ,-_-. =.
bss@iguanasuicide.net ((_/)o o(\_))
ICQ: 514984 YM/AIM: DaTwinkDaddy `-'(. .)`-'
http://iguanasuicide.net/ \_/
Hello again! Sorry about the HTML. I don't know why that happened. I don't have any options to chang the content. If this doesn't work I'll have find another e-mail provider.
Here I go again. I need some help configuring the isc-dhcp-server to serve squeeze boot images with tftp. The machine I want to serve with is an old PowerBook running squeeze. The client is an eMac. The network is private (not connected to the internet in any way. I have a router, but I may just use a crossover cabel. I'm not very good with networking. I'm not sure what to put for the domain-name option. Do I make this up? Do I need a DNS server like Bind, or will something in /etc/resolve.conf suffice?. The installation manual doesn't say anything about using a DNS server. Is the server-name the host name of the server? And am I defining the client host name in the host declaration?
here's what I got in /etc/dhcp/dhcpd.conf
#
# Sample configuration file for ISC dhcpd for Debian
#
#
# The ddns-updates-style parameter controls whether or not the server will
# attempt to do a DNS update when a lease is confirmed. We default to the
# behavior of the version 2 packages ('none', since DHCP v2 didn't
# have support for DDNS.)
ddns-update-style none;
# option definitions common to all supported networks...
option domain-name "local";
option domain-name-servers 192.168.1.254; #ns1.magnet.org, ns2.magnet.org;
option subnet-mask 255.255.255.0;
option broadcast-address 192.168.1.255;
server-name "macro";
default-lease-time 600;
max-lease-time 7200;
subnet 192.168.1.0 netmask 255.255.255.0 {
range 192.168.1.10 192.168.1.100;
option routers 192.168.1.1;
}
host emac {
filename "yaboot";
server-name "macro";
next-server macro;
hardware ethernet 00:0a:95:c2:30:54;
fixed-address 192.168.1.10;
}
# If this DHCP server is the official DHCP server for the local
# network, the authoritative directive should be uncommented.
# authoritative;
# Use this to send dhcp log messages to a different log file (you also
# have to hack syslog.conf to complete the redirection).
# log-facility local7;
# No service will be given on this subnet, but declaring it helps the
# DHCP server to understand the network topology.
#subnet 10.152.187.0 netmask 255.255.255.0 {
#}
# This is a very basic subnet declaration.
# subnet 10.254.239.0 netmask 255.255.255.224 {
# range 10.254.239.10 10.254.239.20;
# option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;
}
# This declaration allows BOOTP clients to get dynamic addresses,
# which we don't really recommend.
#subnet 10.254.239.32 netmask 255.255.255.224 {
# range dynamic-bootp 10.254.239.40 10.254.239.60;
# option broadcast-address 10.254.239.31;
# option routers rtr-239-32-1.example.org;
#}
# A slightly different configuration for an internal subnet.
#subnet 10.5.5.0 netmask 255.255.255.224 {
# range 10.5.5.26 10.5.5.30;
# option domain-name-servers ns1.internal.example.org;
# option domain-name "internal.example.org";
# option routers 10.5.5.1;
# option broadcast-address 10.5.5.31;
# default-lease-time 600;
# max-lease-time 7200;
#}
# Hosts which require special configuration options can be listed in
# host statements. If no address is specified, the address will be
# allocated dynamically (if possible), but the host-specific information
# will still come from the host declaration.
#host passacaglia {
# hardware ethernet 0:0:c0:5d:bd:95;
# filename "vmunix.passacaglia";
# server-name "toccata.fugue.com";
#}
# Fixed IP addresses can also be specified for hosts. These addresses
# should not also be listed as being available for dynamic assignment.
# Hosts for which fixed IP addresses have been specified can boot using
# BOOTP or DHCP. Hosts for which no fixed address is specified can only
# be booted with DHCP, unless there is an address range on the subnet
# to which a BOOTP client is connected which has the dynamic-bootp flag
# set.
#host fantasia {
# hardware ethernet 08:00:07:26:c0:a5;
# fixed-address fantasia.fugue.com;
#}
# You can declare a class of clients and then do address allocation
# based on that. The example below shows a case where all clients
# in a certain class get addresses on the 10.17.224/24 subnet, and all
# other clients get addresses on the 10.0.29/24 subnet.
#class "foo" {
# match if substring (option vendor-class-identifier, 0, 4) = "SUNW";
#}
#shared-network 224-29 {
# subnet 10.17.224.0 netmask 255.255.255.0 {
# option routers rtr-224.example.org;
# }
# subnet 10.0.29.0 netmask 255.255.255.0 {
# option routers rtr-29.example.org;
# }
# pool {
# allow members of "foo";
# range 10.17.224.10 10.17.224.250;
# }
# pool {
# deny members of "foo";
# range 10.0.29.10 10.0.29.230;
# }
#}
... and my syslog has this:
Feb 26 16:30:35 macro dhcpd: /etc/dhcp/dhcpd.conf line 33: expecting a declaration
Feb 26 16:30:35 macro dhcpd: # option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;
Feb 26 16:30:35 macro dhcpd: ^
Feb 26 16:30:35 macro dhcpd: Configuration file errors encountered -- exiting
Feb 26 16:30:35 macro dhcpd: Internet Systems Consortium DHCP Server 4.1.1-P1
Feb 26 16:30:35 macro dhcpd: Copyright 2004-2010 Internet Systems Consortium.
Feb 26 16:30:35 macro dhcpd: All rights reserved.
Feb 26 16:30:35 macro dhcpd: For info, please visit https://www.isc.org/software/dhcp/
Feb 26 16:30:35 macro dhcpd: /etc/dhcp/dhcpd.conf line 33: expecting a declaration
Feb 26 16:30:35 macro dhcpd: # option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;
Feb 26 16:30:35 macro dhcpd: ^
Feb 26 16:30:35 macro dhcpd: Configuration file errors encountered -- exiting
... line 33 is a closing bracket of the host declaration, which is for the eMac client? I haven't physically connected anything yet, but I believe that doesn't matters yet, right?
I'll start plugging things in when the errors stop. Thank you kindly for your time and condiderstion.
Yours sincerely Urpion
_____________________________________________________________
Get your FREE, LinuxWaves.com Email Now! --> http://www.LinuxWaves.com
Join Linux Discussions! --> http://Community.LinuxWaves.com
Reply to: