Problems with USB
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi.
Just upgraded my mobo to an ASRock M3A770DE, after the last mobo sound
system was burned out by microphone feedback.
Well, I'm having serious USB problems. I have a Lexar card reader that
has worked perfectly well for years, and it has always been
recognized right away. When I plug it in,
[ 817.158069] usb 2-1: reset high speed USB device using ehci_hcd and
address 3
[ 848.198073] usb 2-1: reset high speed USB device using ehci_hcd and
address 3
[ 879.174080] usb 2-1: reset high speed USB device using ehci_hcd and
address 3
[ 910.150073] usb 2-1: reset high speed USB device using ehci_hcd and
address 3
[ 941.126071] usb 2-1: reset high speed USB device using ehci_hcd and
address 3
[ 960.503099] INFO: task blkid:2791 blocked for more than 120
seconds.
[ 960.503108] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
disables this message.
[ 960.503115] blkid D 00000000 0 2791 2748
0x00000000
[ 960.503127] f220b0c0 00000082 00000000 00000000 00000000 00000000
c10219b0 c1436340
[ 960.503140] f220b260 c1436340 33850000 f700c2e0 f220b260 f220b264
c1436340 f220b0c0
[ 960.503152] c1436340 00000001 00000000 000939bf 000939bf 00000000
00000000 c109082c
[ 960.503163] Call Trace:
[ 960.503179] [<c10219b0>] ? kmap_atomic_prot+0xec/0x108
[ 960.503191] [<c109082c>] ? zone_watermark_ok+0x1d/0x23
[ 960.503200] [<c10219b0>] ? kmap_atomic_prot+0xec/0x108
[ 960.503209] [<c1021807>] ? __kunmap_atomic+0x57/0x6c
[ 960.503218] [<c1092c12>] ? get_page_from_freelist+0x3d5/0x576
[ 960.503229] [<c128f5a6>] ? __mutex_lock_common+0xe9/0x13a
[ 960.503237] [<c128f606>] ? __mutex_lock_slowpath+0xf/0x11
[ 960.503245] [<c128f697>] ? mutex_lock+0x17/0x24
[ 960.503253] [<c128f697>] ? mutex_lock+0x17/0x24
[ 960.503261] [<c10e2f5d>] ? __blkdev_get+0x6a/0x2b4
[ 960.503268] [<c10e3333>] ? blkdev_get+0x18c/0x25f
[ 960.503277] [<c1113d80>] ? fsnotify_perm+0x4f/0x5a
[ 960.503283] [<c10e2939>] ? bd_acquire+0x20/0x8f
[ 960.503292] [<c10c0afa>] ? __dentry_open+0x136/0x211
[ 960.503301] [<c10c0c6f>] ? nameidata_to_filp+0x3a/0x45
[ 960.503308] [<c10e3406>] ? blkdev_open+0x0/0x5e
[ 960.503315] [<c10ca37b>] ? finish_open+0x76/0x10f
[ 960.503322] [<c10cbbd9>] ? do_filp_open+0x171/0x4ef
[ 960.503331] [<c1292c54>] ? do_page_fault+0x345/0x361
[ 960.503338] [<c1292c41>] ? do_page_fault+0x332/0x361
[ 960.503345] [<c10d3336>] ? alloc_fd+0x4f/0xb1
[ 960.503353] [<c10c08e9>] ? do_sys_open+0x41/0xbd
[ 960.503361] [<c10c09a9>] ? sys_open+0x1e/0x23
[ 960.503369] [<c100309f>] ? sysenter_do_call+0x12/0x28
[ 972.102074] usb 2-1: reset high speed USB device using ehci_hcd and
address 3
[ 972.218844] sd 7:0:0:2: [sdd] Asking for cache data failed
[ 972.218855] sd 7:0:0:2: [sdd] Assuming drive cache: write through
[ 1003.142068] usb 2-1: reset high speed USB device using ehci_hcd and
address 3
[ 1034.118072] usb 2-1: reset high speed USB device using ehci_hcd and
address 3
[ 1065.158068] usb 2-1: reset high speed USB device using ehci_hcd and
address 3
[ 1080.503090] INFO: task blkid:2791 blocked for more than 120
seconds.
[ 1080.503099] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
disables this message.
[ 1080.503106] blkid D 00000000 0 2791 1
0x00000000
[ 1080.503117] f220b0c0 00000082 00000000 00000000 00000000 00000000
c10219b0 c1436340
[ 1080.503131] f220b260 c1436340 33850000 f700c2e0 f220b260 f220b264
c1436340 f220b0c0
[ 1080.503142] c1436340 00000001 00000000 000939bf 000939bf 00000000
00000000 c109082c
[ 1080.503154] Call Trace:
[ 1080.503170] [<c10219b0>] ? kmap_atomic_prot+0xec/0x108
[ 1080.503183] [<c109082c>] ? zone_watermark_ok+0x1d/0x23
[ 1080.503192] [<c10219b0>] ? kmap_atomic_prot+0xec/0x108
[ 1080.503201] [<c1021807>] ? __kunmap_atomic+0x57/0x6c
[ 1080.503210] [<c1092c12>] ? get_page_from_freelist+0x3d5/0x576
[ 1080.503220] [<c128f5a6>] ? __mutex_lock_common+0xe9/0x13a
[ 1080.503229] [<c128f606>] ? __mutex_lock_slowpath+0xf/0x11
[ 1080.503237] [<c128f697>] ? mutex_lock+0x17/0x24
[ 1080.503244] [<c128f697>] ? mutex_lock+0x17/0x24
[ 1080.503252] [<c10e2f5d>] ? __blkdev_get+0x6a/0x2b4
[ 1080.503260] [<c10e3333>] ? blkdev_get+0x18c/0x25f
[ 1080.503269] [<c1113d80>] ? fsnotify_perm+0x4f/0x5a
[ 1080.503275] [<c10e2939>] ? bd_acquire+0x20/0x8f
[ 1080.503284] [<c10c0afa>] ? __dentry_open+0x136/0x211
[ 1080.503293] [<c10c0c6f>] ? nameidata_to_filp+0x3a/0x45
[ 1080.503299] [<c10e3406>] ? blkdev_open+0x0/0x5e
[ 1080.503307] [<c10ca37b>] ? finish_open+0x76/0x10f
[ 1080.503314] [<c10cbbd9>] ? do_filp_open+0x171/0x4ef
[ 1080.503322] [<c1292c54>] ? do_page_fault+0x345/0x361
[ 1080.503329] [<c1292c41>] ? do_page_fault+0x332/0x361
[ 1080.503337] [<c10d3336>] ? alloc_fd+0x4f/0xb1
[ 1080.503345] [<c10c08e9>] ? do_sys_open+0x41/0xbd
[ 1080.503353] [<c10c09a9>] ? sys_open+0x1e/0x23
[ 1080.503361] [<c100309f>] ? sysenter_do_call+0x12/0x28
[ 1096.134073] usb 2-1: reset high speed USB device using ehci_hcd and
address 3
[ 1127.110057] usb 2-1: reset high speed USB device using ehci_hcd and
address 3
[ 1158.150068] usb 2-1: reset high speed USB device using ehci_hcd and
address 3
[ 1158.266744] sd 7:0:0:2: [sdd] Asking for cache data failed
[ 1158.266755] sd 7:0:0:2: [sdd] Assuming drive cache: write through
[ 1158.272499] sdd: sdd1
[ 1158.272558] sdd: p1 size 4022029 extends beyond EOD, enabling
native capacity
[ 1189.126079] usb 2-1: reset high speed USB device using ehci_hcd and
address 3
[ 1200.503113] INFO: task blkid:2791 blocked for more than 120
seconds.
[ 1200.503121] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
disables this message.
[ 1200.503128] blkid D 00000000 0 2791 1
0x00000000
[ 1200.503139] f220b0c0 00000082 00000000 00000000 00000000 00000000
c10219b0 c1436340
[ 1200.503153] f220b260 c1436340 33850000 f700c2e0 f220b260 f220b264
c1436340 f220b0c0
[ 1200.503165] c1436340 00000001 00000000 000939bf 000939bf 00000000
00000000 c109082c
[ 1200.503177] Call Trace:
[ 1200.503192] [<c10219b0>] ? kmap_atomic_prot+0xec/0x108
[ 1200.503204] [<c109082c>] ? zone_watermark_ok+0x1d/0x23
[ 1200.503214] [<c10219b0>] ? kmap_atomic_prot+0xec/0x108
[ 1200.503222] [<c1021807>] ? __kunmap_atomic+0x57/0x6c
[ 1200.503231] [<c1092c12>] ? get_page_from_freelist+0x3d5/0x576
[ 1200.503241] [<c128f5a6>] ? __mutex_lock_common+0xe9/0x13a
[ 1200.503250] [<c128f606>] ? __mutex_lock_slowpath+0xf/0x11
[ 1200.503258] [<c128f697>] ? mutex_lock+0x17/0x24
[ 1200.503265] [<c128f697>] ? mutex_lock+0x17/0x24
[ 1200.503273] [<c10e2f5d>] ? __blkdev_get+0x6a/0x2b4
[ 1200.503280] [<c10e3333>] ? blkdev_get+0x18c/0x25f
[ 1200.503290] [<c1113d80>] ? fsnotify_perm+0x4f/0x5a
[ 1200.503296] [<c10e2939>] ? bd_acquire+0x20/0x8f
[ 1200.503305] [<c10c0afa>] ? __dentry_open+0x136/0x211
[ 1200.503314] [<c10c0c6f>] ? nameidata_to_filp+0x3a/0x45
[ 1200.503320] [<c10e3406>] ? blkdev_open+0x0/0x5e
[ 1200.503328] [<c10ca37b>] ? finish_open+0x76/0x10f
[ 1200.503335] [<c10cbbd9>] ? do_filp_open+0x171/0x4ef
[ 1200.503343] [<c1292c54>] ? do_page_fault+0x345/0x361
[ 1200.503350] [<c1292c41>] ? do_page_fault+0x332/0x361
[ 1200.503358] [<c10d3336>] ? alloc_fd+0x4f/0xb1
[ 1200.503366] [<c10c08e9>] ? do_sys_open+0x41/0xbd
[ 1200.503374] [<c10c09a9>] ? sys_open+0x1e/0x23
[ 1200.503382] [<c100309f>] ? sysenter_do_call+0x12/0x28
[ 1220.166051] usb 2-1: reset high speed USB device using ehci_hcd and
address 3
[ 1251.142052] usb 2-1: reset high speed USB device using ehci_hcd and
address 3
This happens multiple times, and then the SD card is recognized and
works just fine until I disconnect it.
I have not seen this kind of behavior before. Every liveCD I've tried
has also crashed during hardware detection. I'm a bit concerned that
this mobo is not going to work out. Unfortunately, the ROM is fully
up-to-date, something that was not true on my last mobo that had CPU
scaling issues right away and a rom update fixed them.
Any suggestions? Pointers to diagnostic disks?
Curt-
- --
Those who torment us for our own good will torment us without end,
for they do so with the approval of their consciences.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEVAwUBTXQFvS9Y35yItIgBAQKqQgf9Gzk1vjZ1tiDY/mBJ0bimK9U+ju6g+8iU
a9t94ZnbWGm0/Ap9m/NPrQT5wWGHM3sRzi2SDMU7U+DkzkuFPaElcC1BmbzknH7b
BWOmPWPJUl8nT/yni7XaiKHjLtee2T4ZL/gCvIvnig/OeyPZVjok52YeXuElNG7d
AkwycQzerb7G502sKgClbUX1KFmsp2KakFjLiqDOSIhXHTCVz6Ku8KeNiCfex6n2
B96Ta5gqAu63uVTt6MzWj6uveansWrHzsRwpWOxTkMn7KlBz2w59Blm6Ft3y9MLU
1JgWohPgGpiqmq1yn1pNOwPDJnFh0ZLQgS//cSoHjaOcln+fRTS78w==
=7pXf
-----END PGP SIGNATURE-----
Reply to: