Re: pata_it821x

[Twanny Azzopardi <twanny.azzopardi@gmail.com>]

On Thursday 10 February 2011 21:28:04 Camaleón wrote:
> On Thu, 10 Feb 2011 20:45:59 +0100, Twanny Azzopardi wrote:
> > On Thursday 10 February 2011 17:41:34 Camaleón wrote:
> >> On Thu, 10 Feb 2011 13:29:18 +0100, Twanny Azzopardi wrote:
> >> > I made a netinst with 5.0.8, but pata_it821x is not installed, can I
> >> > download the precompiled module?
> >> 
> >> Hum... not sure if this will help you, but...
> >> 
> >> sm01@stt008:~$ locate it821x pata
> >> /lib/modules/2.6.26-2-amd64/kernel/drivers/ata/pata_artop.ko
> >> /lib/modules/2.6.26-2-amd64/kernel/drivers/ata/pata_marvell.ko
> >> /lib/modules/2.6.26-2-amd64/kernel/drivers/ata/pata_sch.ko
> >> /lib/modules/2.6.26-2-amd64/kernel/drivers/ata/pata_sis.ko
> >> /lib/modules/2.6.26-2-amd64/kernel/drivers/ide/pci/it821x.ko
> >> 
> >> I mean, it seems to be named "it821x" (not "pata_it821x") and it should
> >> come with the stock kernel :-?
> > 
> > actually I cannot pass it the noraid option to configure it in by pass
> > mode.
> 
> Can you please tell us a bit more about...?
> 
> a/ what are you doing exactly and what error are you getting
> b/ what is your hardware/hard disk setup
> 
> You could also jump to tty4 to get additional information or message
> errors. And IIRC, there is an option in the installer menu to save a
> debug log for later review.
> 
> Greeting

I have a DVD connected to this pci-ide card:

02:0a.0 RAID bus controller: Integrated Technology Express, Inc. IT/ITE8212 
Dual channel ATA RAID controller (rev 13)

on lenny.

This loads the module it821x but in smart mode ( RAID )

I want to use is as normal ide by passing the parameter noraid=1, but I alway 
get 'unknown option - ignored'.

I got it working when I was using centos.

Regards,
Twanny.