Re: Realtek 8185 chipset problem
On Sat, Jan 29, 2011 at 02:01:49PM -0700, Paul Scott wrote:
> On Sat, Jan 29, 2011 at 03:02:20PM -0500, Stephen Powell wrote:
> > On Sat, 29 Jan 2011 14:23:54 -0500 (EST), Paul Scott wrote:
> > >
> > > I must leave for a while and I don't know whether it shows up for this
> > > card but do you know what missing firmware err=-110 is? I can find
> > > other errors online but not this one.
> >
> > I haven't found any official documentation, but one post I found seems
> > to suggest that -110 is a timeout error. How about if you post all
> > the kernel boot messages?
>
> I believe this is a separate problem with the Orinoco Silver I am using now. I will
> reboot with the rtl8185 card installed and see if the message is still there.>
I'm attaching a dmesg because this might help me get the Orinoco Silver working again for
secured networks with a newer kernel. It works fine using dhclient now on unsecured
nets.
Thanks,
Paul
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-30) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 04:01:41 UTC 2011
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved)
[ 0.000000] BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000ef60000 (usable)
[ 0.000000] BIOS-e820: 000000000ef60000 - 000000000ef70000 (ACPI data)
[ 0.000000] BIOS-e820: 000000000ef70000 - 0000000010000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0xef60 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-DFFFF uncachable
[ 0.000000] E0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-back
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFF80000 mask FFFF80000 write-protect
[ 0.000000] 1 base 000000000 mask FF0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-000000000ef60000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 000ec00000 page 2M
[ 0.000000] 000ec00000 - 000ef60000 page 4k
[ 0.000000] kernel direct mapping tables up to ef60000 @ 7000-d000
[ 0.000000] RAMDISK: 0ab92000 - 0b3c78e6
[ 0.000000] ACPI: RSDP 000f0090 00014 (v00 TOSHIB)
[ 0.000000] ACPI: RSDT 0ef60000 0002C (v01 TOSHIB 750 00970814 TASM 04010000)
[ 0.000000] ACPI: FACP 0ef60054 00084 (v02 TOSHIB 750 00970814 TASM 04010000)
[ 0.000000] ACPI: DSDT 0ef600d8 063F6 (v01 TOSHIB 4010 20020220 MSFT 0100000A)
[ 0.000000] ACPI: FACS 000eee00 00040
[ 0.000000] ACPI: BOOT 0ef6002c 00028 (v01 TOSHIB 750 00970814 TASM 04010000)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 239MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 0ef60000
[ 0.000000] low ram: 0 - 0ef60000
[ 0.000000] node 0 low ram: 00000000 - 0ef60000
[ 0.000000] node 0 bootmap 00002000 - 00003dec
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 000ef60000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014c9bb4] TEXT DATA BSS ==> [0001000000 - 00014c9bb4]
[ 0.000000] #4 [000ab92000 - 000b3c78e6] RAMDISK ==> [000ab92000 - 000b3c78e6]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [00014ca000 - 00014d01dc] BRK ==> [00014ca000 - 00014d01dc]
[ 0.000000] #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #8 [0000002000 - 0000004000] BOOTMAP ==> [0000002000 - 0000004000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0000ef60
[ 0.000000] HighMem 0x0000ef60 -> 0x0000ef60
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0000ef60
[ 0.000000] On node 0 totalpages: 61183
[ 0.000000] free_area_init_node: node 0, pgdat c13b2860, node_mem_map c14d2000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 447 pages used for memmap
[ 0.000000] Normal zone: 56737 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xee08
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000ee000
[ 0.000000] PM: Registered nosave memory: 00000000000ee000 - 00000000000ef000
[ 0.000000] PM: Registered nosave memory: 00000000000ef000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 10000000 (gap: 10000000:eff80000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s34296 r0 d23048 u4194304
[ 0.000000] pcpu-alloc: s34296 r0 d23048 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60704
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=9bcb32c4-ba54-4bd5-aa22-390fdee7ab77 ro quiet
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 228816k/245120k available (2501k kernel code, 15568k reserved, 1323k data, 376k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xcf760000 - 0xff3fe000 ( 764 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xcef60000 ( 239 MB)
[ 0.000000] .init : 0xc13bd000 - 0xc141b000 ( 376 kB)
[ 0.000000] .data : 0xc12716a1 - 0xc13bc460 (1323 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12716a1 (2501 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 459.243 MHz processor.
[ 0.008025] Calibrating delay loop (skipped), value calculated using timer frequency.. 918.48 BogoMIPS (lpj=1836972)
[ 0.008134] Security Framework initialized
[ 0.008179] SELinux: Disabled at boot.
[ 0.008219] Mount-cache hash table entries: 512
[ 0.008892] Initializing cgroup subsys ns
[ 0.008916] Initializing cgroup subsys cpuacct
[ 0.008940] Initializing cgroup subsys devices
[ 0.008955] Initializing cgroup subsys freezer
[ 0.008971] Initializing cgroup subsys net_cls
[ 0.009112] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 0.009127] CPU: L2 cache: 512K
[ 0.012034] mce: CPU supports 5 MCE banks
[ 0.012129] Performance Events:
[ 0.012141] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.012152] no hardware sampling interrupt available.
[ 0.012166] p6 PMU driver.
[ 0.012234] ... version: 0
[ 0.012244] ... bit width: 32
[ 0.012254] ... generic registers: 2
[ 0.012266] ... value mask: 00000000ffffffff
[ 0.012278] ... max period: 000000007fffffff
[ 0.012288] ... fixed-purpose events: 0
[ 0.012299] ... event mask: 0000000000000003
[ 0.012321] Checking 'hlt' instruction... OK.
[ 0.029694] SMP alternatives: switching to UP code
[ 0.045688] Freeing SMP alternatives: 13k freed
[ 0.045745] ACPI: Core revision 20090903
[ 0.074074] ACPI: setting ELCR to 0200 (from 0a00)
[ 0.075537] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.075554] weird, boot CPU (#0) not listed by the BIOS.
[ 0.075564] SMP motherboard not detected.
[ 0.075580] Local APIC not detected. Using dummy APIC emulation.
[ 0.075590] SMP disabled
[ 0.076301] Brought up 1 CPUs
[ 0.076323] Total of 1 processors activated (918.48 BogoMIPS).
[ 0.080276] CPU0 attaching NULL sched-domain.
[ 0.081600] devtmpfs: initialized
[ 0.084895] regulator: core version 0.5
[ 0.085229] NET: Registered protocol family 16
[ 0.085784] ACPI: bus type pci registered
[ 0.087017] PCI: PCI BIOS revision 2.10 entry at 0xfe5ae, last bus=5
[ 0.087030] PCI: Using configuration type 1 for base access
[ 0.089208] bio: create slab <bio-0> at 0
[ 0.092492] ACPI: EC: Look up EC in DSDT
[ 0.113876] ACPI: Interpreter enabled
[ 0.113898] ACPI: (supports S0 S3 S4 S5)
[ 0.114006] ACPI: Using PIC for interrupt routing
[ 0.138487] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 0.143012] ACPI: Power Resource [PFAN] (off)
[ 0.150305] ACPI: ACPI Dock Station Driver: 2 docks/bays found
[ 0.150431] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.150678] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xf0000000-0xf3ffffff]
[ 0.151028] pci 0000:00:02.0: reg 10 32bit mmio: [0xf7eff000-0xf7efffff]
[ 0.151142] pci 0000:00:02.0: PME# supported from D3hot D3cold
[ 0.151164] pci 0000:00:02.0: PME# disabled
[ 0.151300] pci 0000:00:04.0: reg 20 io port: [0xeff0-0xefff]
[ 0.151459] pci 0000:00:06.0: reg 10 io port: [0x00-0xff]
[ 0.151484] pci 0000:00:06.0: reg 14 32bit mmio: [0x000000-0x000fff]
[ 0.151587] pci 0000:00:06.0: supports D1 D2
[ 0.151602] pci 0000:00:06.0: PME# supported from D2 D3hot D3cold
[ 0.151620] pci 0000:00:06.0: PME# disabled
[ 0.151986] pci 0000:00:08.0: quirk: region ee00-ee3f claimed by ali7101 ACPI
[ 0.152001] pci 0000:00:08.0: quirk: region ef00-ef1f claimed by ali7101 SMB
[ 0.152001] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf7efe000-0xf7efefff]
[ 0.152001] pci 0000:00:0a.0: reg 14 io port: [0xeec0-0xeeff]
[ 0.152001] pci 0000:00:0a.0: reg 18 32bit mmio: [0xf7ec0000-0xf7edffff]
[ 0.152001] pci 0000:00:0a.0: supports D1 D2
[ 0.152001] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.152001] pci 0000:00:0a.0: PME# disabled
[ 0.152025] pci 0000:00:0c.0: reg 10 32bit mmio: [0x000000-0x0007ff]
[ 0.152055] pci 0000:00:0c.0: reg 14 32bit mmio: [0x000000-0x003fff]
[ 0.152162] pci 0000:00:0c.0: supports D1 D2
[ 0.152175] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.152195] pci 0000:00:0c.0: PME# disabled
[ 0.152305] pci 0000:00:10.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.152359] pci 0000:00:10.0: supports D1 D2
[ 0.152375] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.152392] pci 0000:00:10.0: PME# disabled
[ 0.152498] pci 0000:00:11.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.152650] pci 0000:00:11.1: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.152821] pci 0000:00:12.0: reg 10 32bit mmio: [0x000000-0x0001ff]
[ 0.152942] pci 0000:00:12.0: supports D1 D2
[ 0.152958] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.152976] pci 0000:00:12.0: PME# disabled
[ 0.153139] pci 0000:01:00.0: reg 10 32bit mmio: [0xfc000000-0xfdffffff]
[ 0.153165] pci 0000:01:00.0: reg 14 32bit mmio: [0xfbc00000-0xfbffffff]
[ 0.153188] pci 0000:01:00.0: reg 18 32bit mmio: [0xf8000000-0xf9ffffff]
[ 0.153212] pci 0000:01:00.0: reg 1c 32bit mmio: [0xf7ff8000-0xf7ffffff]
[ 0.153249] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 0.153301] pci 0000:01:00.0: supports D1 D2
[ 0.153410] pci 0000:00:01.0: bridge 32bit mmio: [0xf7f00000-0xfdffffff]
[ 0.153582] pci_bus 0000:00: on NUMA node 0
[ 0.153605] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.154090] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.189872] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11)
[ 0.190742] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11)
[ 0.191604] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11)
[ 0.192581] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11)
[ 0.193439] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11)
[ 0.194297] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11)
[ 0.194887] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.194902] vgaarb: loaded
[ 0.195365] PCI: Using ACPI for IRQ routing
[ 0.196447] Switching to clocksource tsc
[ 0.203710] pnp: PnP ACPI init
[ 0.203865] ACPI: bus type pnp registered
[ 0.211517] pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:06.0 BAR 0 (0x0-0xff), disabling
[ 0.211544] pnp 00:08: io resource (0x62-0x62) overlaps 0000:00:06.0 BAR 0 (0x0-0xff), disabling
[ 0.211563] pnp 00:08: io resource (0x66-0x66) overlaps 0000:00:06.0 BAR 0 (0x0-0xff), disabling
[ 0.211585] pnp 00:08: io resource (0x80-0x80) overlaps 0000:00:06.0 BAR 0 (0x0-0xff), disabling
[ 0.211606] pnp 00:08: io resource (0x84-0x86) overlaps 0000:00:06.0 BAR 0 (0x0-0xff), disabling
[ 0.211625] pnp 00:08: io resource (0x88-0x88) overlaps 0000:00:06.0 BAR 0 (0x0-0xff), disabling
[ 0.211647] pnp 00:08: io resource (0x8c-0x8e) overlaps 0000:00:06.0 BAR 0 (0x0-0xff), disabling
[ 0.211666] pnp 00:08: io resource (0x92-0x92) overlaps 0000:00:06.0 BAR 0 (0x0-0xff), disabling
[ 0.211687] pnp 00:08: io resource (0xb0-0xb3) overlaps 0000:00:06.0 BAR 0 (0x0-0xff), disabling
[ 0.211709] pnp 00:08: io resource (0xe0-0xef) overlaps 0000:00:06.0 BAR 0 (0x0-0xff), disabling
[ 0.234278] pnp: PnP ACPI: found 12 devices
[ 0.234292] ACPI: ACPI bus type pnp unregistered
[ 0.234319] PnPBIOS: Disabled by ACPI PNP
[ 0.234394] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.234417] system 00:00: iomem range 0xe0000-0xeffff could not be reserved
[ 0.234437] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 0.234455] system 00:00: iomem range 0x100000-0xef5ffff could not be reserved
[ 0.234476] system 00:00: iomem range 0xef60000-0xef6ffff could not be reserved
[ 0.234494] system 00:00: iomem range 0xef70000-0xeffffff has been reserved
[ 0.234513] system 00:00: iomem range 0xf000000-0xfffffff has been reserved
[ 0.234535] system 00:00: iomem range 0xffe00000-0xffffffff could not be reserved
[ 0.234584] system 00:08: ioport range 0x370-0x371 has been reserved
[ 0.234604] system 00:08: ioport range 0x40b-0x40b has been reserved
[ 0.234621] system 00:08: ioport range 0x480-0x48f has been reserved
[ 0.234640] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.234657] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
[ 0.234676] system 00:08: ioport range 0x6c0-0x6ff has been reserved
[ 0.234693] system 00:08: ioport range 0xe000-0xe07f has been reserved
[ 0.234713] system 00:08: ioport range 0xe080-0xe0ff has been reserved
[ 0.234730] system 00:08: ioport range 0xe400-0xe47f has been reserved
[ 0.234750] system 00:08: ioport range 0xe480-0xe4ff has been reserved
[ 0.234767] system 00:08: ioport range 0xe800-0xe87f has been reserved
[ 0.234786] system 00:08: ioport range 0xe880-0xe8ff has been reserved
[ 0.234803] system 00:08: ioport range 0xec00-0xec7f has been reserved
[ 0.234823] system 00:08: ioport range 0xec80-0xecff has been reserved
[ 0.234843] system 00:08: ioport range 0xee00-0xee41 could not be reserved
[ 0.234860] system 00:08: ioport range 0xee90-0xee9f has been reserved
[ 0.234880] system 00:08: ioport range 0xeeac-0xeeac has been reserved
[ 0.234898] system 00:08: ioport range 0xef00-0xef3f could not be reserved
[ 0.234918] system 00:08: ioport range 0xef40-0xef5f has been reserved
[ 0.272103] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.272120] pci 0000:00:01.0: IO window: disabled
[ 0.272142] pci 0000:00:01.0: MEM window: 0xf7f00000-0xfdffffff
[ 0.272166] pci 0000:00:01.0: PREFETCH window: 0x28000000-0x280fffff
[ 0.272199] pci 0000:00:10.0: CardBus bridge, secondary bus 0000:02
[ 0.272213] pci 0000:00:10.0: IO window: 0x001400-0x0014ff
[ 0.272233] pci 0000:00:10.0: IO window: 0x001800-0x0018ff
[ 0.272254] pci 0000:00:10.0: PREFETCH window: 0x10000000-0x13ffffff
[ 0.272272] pci 0000:00:10.0: MEM window: 0x14000000-0x17ffffff
[ 0.272294] pci 0000:00:11.0: CardBus bridge, secondary bus 0000:06
[ 0.272307] pci 0000:00:11.0: IO window: 0x001c00-0x001cff
[ 0.272328] pci 0000:00:11.0: IO window: 0x002000-0x0020ff
[ 0.272347] pci 0000:00:11.0: PREFETCH window: 0x18000000-0x1bffffff
[ 0.272368] pci 0000:00:11.0: MEM window: 0x1c000000-0x1fffffff
[ 0.272387] pci 0000:00:11.1: CardBus bridge, secondary bus 0000:0a
[ 0.272403] pci 0000:00:11.1: IO window: 0x002400-0x0024ff
[ 0.272421] pci 0000:00:11.1: IO window: 0x002800-0x0028ff
[ 0.272442] pci 0000:00:11.1: PREFETCH window: 0x20000000-0x23ffffff
[ 0.272464] pci 0000:00:11.1: MEM window: 0x24000000-0x27ffffff
[ 0.272522] pci 0000:00:01.0: setting latency timer to 64
[ 0.272563] pci 0000:00:10.0: enabling device (0000 -> 0003)
[ 0.274272] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 0.274289] PCI: setting IRQ 11 as level-triggered
[ 0.274315] pci 0000:00:10.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 0.274357] pci 0000:00:11.0: enabling device (0000 -> 0003)
[ 0.275793] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 0.275816] pci 0000:00:11.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 0.275861] pci 0000:00:11.1: enabling device (0000 -> 0003)
[ 0.277285] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 0.277307] pci 0000:00:11.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 0.277345] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.277361] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.277380] pci_bus 0000:01: resource 1 mem: [0xf7f00000-0xfdffffff]
[ 0.277396] pci_bus 0000:01: resource 2 pref mem [0x28000000-0x280fffff]
[ 0.277417] pci_bus 0000:02: resource 0 io: [0x1400-0x14ff]
[ 0.277431] pci_bus 0000:02: resource 1 io: [0x1800-0x18ff]
[ 0.277449] pci_bus 0000:02: resource 2 pref mem [0x10000000-0x13ffffff]
[ 0.277465] pci_bus 0000:02: resource 3 mem: [0x14000000-0x17ffffff]
[ 0.277484] pci_bus 0000:06: resource 0 io: [0x1c00-0x1cff]
[ 0.277498] pci_bus 0000:06: resource 1 io: [0x2000-0x20ff]
[ 0.277516] pci_bus 0000:06: resource 2 pref mem [0x18000000-0x1bffffff]
[ 0.277531] pci_bus 0000:06: resource 3 mem: [0x1c000000-0x1fffffff]
[ 0.277550] pci_bus 0000:0a: resource 0 io: [0x2400-0x24ff]
[ 0.277564] pci_bus 0000:0a: resource 1 io: [0x2800-0x28ff]
[ 0.277582] pci_bus 0000:0a: resource 2 pref mem [0x20000000-0x23ffffff]
[ 0.277598] pci_bus 0000:0a: resource 3 mem: [0x24000000-0x27ffffff]
[ 0.277831] NET: Registered protocol family 2
[ 0.278468] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.280268] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.280651] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.281034] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.281052] TCP reno registered
[ 0.281530] NET: Registered protocol family 1
[ 0.314767] pci 0000:00:07.0: Activating ISA DMA hang workarounds
[ 0.314884] pci 0000:01:00.0: Boot video device
[ 0.315215] Unpacking initramfs...
[ 1.673267] Freeing initrd memory: 8406k freed
[ 1.761730] Simple Boot Flag at 0x7c set to 0x1
[ 1.763167] audit: initializing netlink socket (disabled)
[ 1.763269] type=2000 audit(1296333489.760:1): initialized
[ 1.786610] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.796257] VFS: Disk quotas dquot_6.5.2
[ 1.796631] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.797090] msgmni has been set to 464
[ 1.798342] alg: No test for stdrng (krng)
[ 1.798520] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.798539] io scheduler noop registered
[ 1.798552] io scheduler anticipatory registered
[ 1.798564] io scheduler deadline registered
[ 1.798828] io scheduler cfq registered (default)
[ 1.799772] isapnp: Scanning for PnP cards...
[ 2.158859] isapnp: No Plug & Play device found
[ 2.167524] Linux agpgart interface v0.103
[ 2.167617] agpgart-ali 0000:00:00.0: ALi M1644 chipset
[ 2.185525] agpgart-ali 0000:00:00.0: AGP aperture is 64M @ 0xf0000000
[ 2.186299] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.186764] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.188665] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.189475] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.196500] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.196561] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.197942] mice: PS/2 mouse device common for all mice
[ 2.198208] rtc_cmos 00:07: RTC can wake from S4
[ 2.198430] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 2.198524] rtc0: alarms up to one year, 114 bytes nvram
[ 2.198589] cpuidle: using governor ladder
[ 2.198602] cpuidle: using governor menu
[ 2.198630] No iBFT detected.
[ 2.201585] TCP cubic registered
[ 2.202820] NET: Registered protocol family 10
[ 2.205861] lo: Disabled Privacy Extensions
[ 2.207953] Mobile IPv6
[ 2.207974] NET: Registered protocol family 17
[ 2.208118] Using IPI No-Shortcut mode
[ 2.208564] PM: Resume from disk failed.
[ 2.209034] registered taskstats version 1
[ 2.210694] rtc_cmos 00:07: setting system clock to 2011-01-29 20:38:10 UTC (1296333490)
[ 2.210854] Initalizing network drop monitor service
[ 2.211029] Freeing unused kernel memory: 376k freed
[ 2.213703] Write protecting the kernel text: 2504k
[ 2.213818] Write protecting the kernel read-only data: 920k
[ 2.225703] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.319367] udev[46]: starting version 164
[ 3.606472] SCSI subsystem initialized
[ 3.672378] thermal LNXTHERM:01: registered as thermal_zone0
[ 3.672455] ACPI: Thermal Zone [THRM] (29 C)
[ 3.766986] usbcore: registered new interface driver usbfs
[ 3.767806] usbcore: registered new interface driver hub
[ 3.768770] usbcore: registered new device driver usb
[ 3.981062] libata version 3.00 loaded.
[ 4.010688] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 4.010715] e100: Copyright(c) 1999-2006 Intel Corporation
[ 4.021544] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 4.021590] e100 0000:00:0a.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 4.054421] e100 0000:00:0a.0: PME# disabled
[ 4.070284] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.104251] e100: eth0: e100_probe: addr 0xf7efe000, irq 11, MAC addr 00:00:39:a6:0d:d2
[ 4.104453] firewire_ohci 0000:00:0c.0: enabling device (0000 -> 0002)
[ 4.104503] firewire_ohci 0000:00:0c.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 4.137045] fan PNP0C0B:00: registered as cooling_device0
[ 4.137095] ACPI: Fan [FAN] (off)
[ 4.142104] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.176280] firewire_ohci: Added fw-ohci device 0000:00:0c.0, OHCI version 1.10
[ 4.177191] pata_ali 0000:00:04.0: can't derive routing for PCI INT A
[ 4.179599] scsi0 : pata_ali
[ 4.180725] scsi1 : pata_ali
[ 4.186736] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xeff0 irq 14
[ 4.186756] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xeff8 irq 15
[ 4.188712] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
[ 4.188743] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNKG] -> GSI 11 (level, low) -> IRQ 11
[ 4.188885] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 4.189068] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 4.189187] ohci_hcd 0000:00:02.0: irq 11, io mem 0xf7eff000
[ 4.247033] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.247058] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.247075] usb usb1: Product: OHCI Host Controller
[ 4.247087] usb usb1: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
[ 4.247100] usb usb1: SerialNumber: 0000:00:02.0
[ 4.247984] usb usb1: configuration #1 chosen from 1 choice
[ 4.248414] hub 1-0:1.0: USB hub found
[ 4.248493] hub 1-0:1.0: 3 ports detected
[ 4.394386] ata1.00: ATA-8: WDC WD1600BEVE-00A0HT0, 11.01A11, max UDMA/100
[ 4.394408] ata1.00: 312581808 sectors, multi 0: LBA48
[ 4.394550] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 4.402867] ata1.00: configured for UDMA/33
[ 4.403789] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVE-0 11.0 PQ: 0 ANSI: 5
[ 4.569272] ata2.00: ATAPI: CD-W28E, 7.1B, max UDMA/33
[ 4.569376] ata2.00: WARNING: ATAPI DMA disabled for reliability issues. It can be enabled
[ 4.569390] ata2.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.
[ 4.576969] ata2.00: configured for UDMA/33
[ 4.578336] scsi 1:0:0:0: CD-ROM TEAC CD-W28E 7.1B PQ: 0 ANSI: 5
[ 4.696418] firewire_core: created device fw0: GUID 0000390000236436, S400
[ 4.706376] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 4.706786] sd 0:0:0:0: [sda] Write Protect is off
[ 4.706806] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.706975] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.707892] sda: sda1 sda2 sda3
[ 4.736462] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 4.736483] Uniform CD-ROM driver Revision: 3.20
[ 4.738150] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.765743] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.870154] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.870637] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.425701] PM: Starting manual resume from disk
[ 5.425738] PM: Resume from partition 8:3
[ 5.425747] PM: Checking hibernation image.
[ 5.429026] PM: Error -22 checking image file
[ 5.429038] PM: Resume from disk failed.
[ 5.585139] kjournald starting. Commit interval 5 seconds
[ 5.585210] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.764588] udev[290]: starting version 164
[ 9.564976] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 9.907685] Marking TSC unstable due to TSC halts in idle
[ 9.923262] processor LNXCPU:00: registered as cooling_device1
[ 9.926534] Switching to clocksource acpi_pm
[ 9.980731] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 9.981217] ACPI: Lid Switch [LID]
[ 9.982790] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 9.982836] ACPI: Power Button [PWRF]
[ 10.136532] pci 0000:00:08.0: enabling device (0000 -> 0001)
[ 10.139348] ALi_M1535: initialized. timeout=60 sec (nowayout=0)
[ 10.157916] ACPI: AC Adapter [ADP1] (on-line)
[ 10.209932] ACPI Warning for \_SB_.BAT1._BIF: Return Package type mismatch at index 12 - found Integer, expected String/Buffer (20090903/nspredef-1012)
[ 10.225161] ACPI: Battery Slot [BAT1] (battery present)
[ 10.225560] ACPI: Battery Slot [BAT2] (battery absent)
[ 10.246530] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 10.516038] parport_pc 00:0b: activated
[ 10.516165] parport_pc 00:0b: reported by Plug and Play ACPI
[ 10.516372] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 10.772760] NET: Registered protocol family 23
[ 10.808897] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.866169] yenta_cardbus 0000:00:10.0: CardBus bridge found [12a3:ab01]
[ 10.866260] yenta_cardbus 0000:00:10.0: Enabling burst memory read transactions
[ 10.866283] yenta_cardbus 0000:00:10.0: Using CSCINT to route CSC interrupts to PCI
[ 10.866300] yenta_cardbus 0000:00:10.0: Routing CardBus interrupts to PCI
[ 10.866319] yenta_cardbus 0000:00:10.0: TI: mfunc 0x01000002, devctl 0x60
[ 10.891784] alim7101_wdt: Steve Hill <steve@navaho.co.uk>.
[ 10.891863] alim7101_wdt: Detected old alim7101 revision 'a1d'. If this is a cobalt board, set the 'use_gpio' module parameter.
[ 10.962712] input: Toshiba input device as /devices/virtual/input/input4
[ 10.963838] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
[ 10.963853] toshiba_acpi: HCI method: \_SB_.VALD.GHCI
[ 11.089122] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 11.101195] yenta_cardbus 0000:00:10.0: ISA IRQ mask 0x0000, PCI irq 11
[ 11.101219] yenta_cardbus 0000:00:10.0: Socket status: 30000010
[ 11.141130] acpi device:12: registered as cooling_device2
[ 11.144715] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:11/LNXVIDEO:00/input/input5
[ 11.147380] yenta_cardbus 0000:00:11.0: CardBus bridge found [1179:0001]
[ 11.220918] ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no)
[ 11.300496] Detected unconfigured Toshiba laptop with ALi ISA bridge SMSC IrDA chip, pre-configuring device.
[ 11.300542] Activated ALi 1533 ISA bridge port 0x02e8.
[ 11.300560] Activated ALi 1533 ISA bridge port 0x02f8.
[ 11.300996] found SMC SuperIO Chip (devid=0x5a rev=00 base=0x002e): LPC47N227
[ 11.301022] smsc_superio_flat(): IrDA not enabled
[ 11.301075] smsc_superio_flat(): fir: 0x2f8, sir: 0x2e8, dma: 03, irq: 7, mode: 0x02
[ 11.301137] SMsC IrDA Controller found
[ 11.301143] IrCC version 2.0, firport 0x2f8, sirport 0x2e8 dma=3, irq=7
[ 11.301514] No transceiver found. Defaulting to Fast pin select
[ 11.327394] yenta_cardbus 0000:00:11.0: ISA IRQ mask 0x0438, PCI irq 11
[ 11.327420] yenta_cardbus 0000:00:11.0: Socket status: 30000011
[ 11.329424] IrDA: Registered device irda0
[ 11.332477] yenta_cardbus 0000:00:11.1: CardBus bridge found [1179:0001]
[ 11.471181] yenta_cardbus 0000:00:11.1: ISA IRQ mask 0x0438, PCI irq 11
[ 11.471207] yenta_cardbus 0000:00:11.1: Socket status: 30000007
[ 11.506553] alim7101_wdt: Steve Hill <steve@navaho.co.uk>.
[ 11.506626] alim7101_wdt: Detected old alim7101 revision 'a1d'. If this is a cobalt board, set the 'use_gpio' module parameter.
[ 11.521685] usb 1-3: new full speed USB device using ohci_hcd and address 2
[ 11.793037] usb 1-3: New USB device found, idVendor=0930, idProduct=0502
[ 11.793062] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 11.793078] usb 1-3: Product: SiW
[ 11.793091] usb 1-3: Manufacturer: SiW
[ 11.793102] usb 1-3: SerialNumber: 6CA3017A0300
[ 11.793740] usb 1-3: configuration #1 chosen from 1 choice
[ 11.796665] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6
[ 11.851688] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x100-0x3af:
[ 11.858311] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0
[ 11.885439] clean.
[ 11.885845] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean.
[ 11.935000] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x3e0-0x4ff: clean.
[ 11.941394] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x820-0x8ff: clean.
[ 11.943439] pcmcia_socket pcmcia_socket2: cs: IO port probe 0xc00-0xcf7: clean.
[ 11.957751] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean.
[ 11.959991] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
[ 11.962719] pcmcia_socket pcmcia_socket2: cs: IO port probe 0xa00-0xaff: clean.
[ 11.965064] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
[ 11.967857] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[ 11.980372] pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1
[ 12.104767] Bluetooth: Core ver 2.15
[ 12.105344] NET: Registered protocol family 31
[ 12.105354] Bluetooth: HCI device and connection manager initialized
[ 12.105374] Bluetooth: HCI socket layer initialized
[ 12.202021] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 12.207205] usbcore: registered new interface driver btusb
[ 12.287511] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 12.351534] pcmcia 1.0: pcmcia: registering new device pcmcia1.0
[ 12.365217] ALI 5451 0000:00:06.0: power state changed by ACPI to D0
[ 12.365423] ALI 5451 0000:00:06.0: power state changed by ACPI to D0
[ 12.365451] ALI 5451 0000:00:06.0: enabling device (0000 -> 0003)
[ 12.367162] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 12.367192] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 12.614988] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f
[ 12.620445] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 12.622633] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 12.624707] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 12.627506] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 12.629891] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa00fffff
[ 12.654358] pcmcia 0.0: pcmcia: registering new device pcmcia0.0
[ 12.787844] cfg80211: Using static regulatory domain info
[ 12.787865] cfg80211: Regulatory domain: US
[ 12.787876] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.787895] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 12.787911] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 12.787930] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 12.787946] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 12.787963] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 12.787979] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 12.789793] cfg80211: Calling CRDA for country: US
[ 12.890716] orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
[ 12.909151] orinoco_cs 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
[ 12.989591] orinoco_cs 1.0: Hardware identity 0001:0001:0004:0000
[ 12.989756] orinoco_cs 1.0: Station identity 001f:0001:0006:0010
[ 12.989779] orinoco_cs 1.0: Firmware determined as Lucent/Agere 6.16
[ 12.991442] orinoco_cs 1.0: firmware: requesting agere_sta_fw.bin
[ 13.246211] orinoco_cs 1.0: Hardware identity 0001:0001:0004:0000
[ 13.246385] orinoco_cs 1.0: Station identity 001f:0002:0009:0030
[ 13.246407] orinoco_cs 1.0: Firmware determined as Lucent/Agere 9.48
[ 13.246420] orinoco_cs 1.0: Ad-hoc demo mode supported
[ 13.246433] orinoco_cs 1.0: IEEE standard IBSS ad-hoc mode supported
[ 13.246446] orinoco_cs 1.0: WEP supported, 104-bit key
[ 13.246458] orinoco_cs 1.0: WPA-PSK supported
[ 14.092124] hermes @ 00010180: Timeout waiting for card to reset (reg=0x0000)!
[ 14.092293] orinoco_cs 0.0: Failed to initialize firmware (err = -110)
[ 14.092423] orinoco_cs: orinoco_init() failed
[ 16.993823] Adding 1952760k swap on /dev/sda3. Priority:-1 extents:1 across:1952760k
[ 17.454189] EXT3 FS on sda1, internal journal
[ 17.976320] loop: module loaded
[ 19.206252] kjournald starting. Commit interval 5 seconds
[ 19.206933] EXT3 FS on sda2, internal journal
[ 19.206961] EXT3-fs: mounted filesystem with ordered data mode.
[ 20.657253] fuse init (API version 7.13)
[ 22.828325] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input7
[ 24.522194] ttyS0: LSR safety check engaged!
[ 42.981392] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 100.885298] UDF-fs: No VRS found
[ 100.885324] UDF-fs: No partition found (1)
[ 100.942534] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 101.077537] ISOFS: changing to secondary root
[ 176.173410] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 176.393865] eth1: New link status: Connected (0001)
[ 176.394003] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 187.336106] eth1: no IPv6 routers present
Reply to: