Re: iomega 2TB external USB drive
I accidentally sent my reply to Celejar direct instead of to the list
so I am reposting it to the group. If my 'dmseg' is too long -- sorry
about that --
elejar wrote:
On Sat, 04 Sep 2010 22:22:04 -0400
John Lindsay <jclind@sentex.net> wrote:
I just picked up an Iomega 2TB external USB drive. It is formatted
NTSF. When plugged into my Win7 pc it is seen however it does not
show up on screen under Debian (lenny). Is this drive supported? How
can I get it seen by debian?
You need to explain what you mean by "show up on screen". What does
dmesg / syslog say?
Celejar
Hi Celejar and Boyd
I used synaptic to search for ntsf and installed it as it was unmarked.
I am using gnome as a desktop.
Celejar -- here is my dmesg -- first time I have used this -- I am
making the assumption that the latest info is at the bottom of the list
-- it looks like it is attached but I see no icon like I do when I plug
in a memory stick. It does not show up when I click on 'computer' under
places.
John
dmesg:
2086389.733663] hdc: status error: status=0x58 { DriveReady SeekComplete
DataRequest }
[2086389.733669] ide: failed opcode was: unknown
[2086389.733672] hdc: drive not ready for command
[2086389.733712] hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
[2086389.733719] ide: failed opcode was: unknown
[2086389.733724] hdc: drive not ready for command
[2086389.733766] hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
[2086389.733773] ide: failed opcode was: unknown
[2086389.733778] hdc: drive not ready for command
[2086389.733852] hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
[2086389.733859] ide: failed opcode was: unknown
[2086389.733864] hdc: drive not ready for command
[2086389.733968] hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
[2086389.733975] ide: failed opcode was: unknown
[2086389.733982] hdc: drive not ready for command
[2086389.734056] hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
[2086389.734064] ide: failed opcode was: unknown
[2086389.734069] hdc: drive not ready for command
[2086389.734211] hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
[2086389.734219] ide: failed opcode was: unknown
[2086389.734225] hdc: drive not ready for command
[2086389.734580] hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
[2086389.734588] ide: failed opcode was: unknown
[2086389.734597] hdc: drive not ready for command
[2086389.734732] hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
[2086389.734740] ide: failed opcode was: unknown
[2086389.734744] hdc: drive not ready for command
[2086389.771899] hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
[2086389.771907] ide: failed opcode was: unknown
[2086389.771912] hdc: drive not ready for command
[2086389.771941] hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
[2086389.771945] ide: failed opcode was: unknown
[2086389.771948] hdc: drive not ready for command
[2086389.771976] hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
[2086389.771981] ide: failed opcode was: unknown
[2086389.771984] hdc: drive not ready for command
[2086389.772011] hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
[2086389.772016] ide: failed opcode was: unknown
[2086389.772019] hdc: drive not ready for command
[2086389.772022] hdc: weird block size 0
[2086389.772024] hdc: default to 2kb block size
[2086389.772051] hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
[2086389.772056] ide: failed opcode was: unknown
[2086389.772058] hdc: drive not ready for command
[2086389.772086] hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
[2086389.772090] ide: failed opcode was: unknown
[2086389.772093] hdc: drive not ready for command
[2086389.772121] hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
[2086389.772125] ide: failed opcode was: unknown
[2086389.772128] hdc: drive not ready for command
[2086389.772156] hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
[2086389.772161] ide: failed opcode was: unknown
[2086389.772164] hdc: drive not ready for command
[2086389.772191] hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
[2086389.772196] ide: failed opcode was: unknown
[2086389.772199] hdc: drive not ready for command
[2086389.772227] hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
[2086389.772232] ide: failed opcode was: unknown
[2086389.772235] hdc: drive not ready for command
[2086389.772262] hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
[2086389.772267] ide: failed opcode was: unknown
[2086389.772270] hdc: drive not ready for command
[2086389.772298] hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
[2086389.772303] ide: failed opcode was: unknown
[2086389.772306] hdc: drive not ready for command
[2086389.772352] hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
[2086389.772358] ide: failed opcode was: unknown
[2086389.772361] hdc: drive not ready for command
[2086389.772389] hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
[2086389.772395] ide: failed opcode was: unknown
[2086389.772398] hdc: drive not ready for command
[2086389.772460] hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
[2086389.772465] ide: failed opcode was: unknown
[2086389.772470] hdc: drive not ready for command
[2086391.383348] hdc: command error: status=0x51 { DriveReady
SeekComplete Error }
[2086391.383356] hdc: command error: error=0x54 { AbortedCommand
LastFailedSense=0x05 }
[2086391.383361] ide: failed opcode was: unknown
[2086391.384667] ATAPI device hdc:
[2086391.384670] Error: Illegal request -- (Sense key=0x05)
[2086391.384674] Logical block address out of range -- (asc=0x21,
ascq=0x00)
[2086391.384677] The failed "Seek" packet command was:
[2086391.384679] "2b 00 00 1f ff 6a 00 00 00 00 00 00 00 00 00 00 "
[2086391.384692] end_request: I/O error, dev hdc, sector 8388008
[2086391.384696] Buffer I/O error on device hdc, logical block 2097002
[2086391.385071] hdc: command error: status=0x51 { DriveReady
SeekComplete Error }
[2086391.385071] hdc: command error: error=0x54 { AbortedCommand
LastFailedSense=0x05 }
[2086391.385071] ide: failed opcode was: unknown
[2086391.386383] ATAPI device hdc:
[2086391.386387] Error: Illegal request -- (Sense key=0x05)
[2086391.386393] Logical block address out of range -- (asc=0x21,
ascq=0x00)
[2086391.386398] The failed "Read 10" packet command was:
[2086391.386399] "28 00 00 1f ff 6b 00 00 01 00 00 00 00 00 00 00 "
[2086391.386418] end_request: I/O error, dev hdc, sector 8388012
[2086391.386424] Buffer I/O error on device hdc, logical block 2097003
[2086391.387036] hdc: command error: status=0x51 { DriveReady
SeekComplete Error }
[2086391.387043] hdc: command error: error=0x54 { AbortedCommand
LastFailedSense=0x05 }
[2086391.387048] ide: failed opcode was: unknown
[2086391.388535] ATAPI device hdc:
[2086391.388537] Error: Illegal request -- (Sense key=0x05)
[2086391.388541] Logical block address out of range -- (asc=0x21,
ascq=0x00)
[2086391.388544] The failed "Read 10" packet command was:
[2086391.388545] "28 00 00 1f ff 6a 00 00 01 00 00 00 00 00 00 00 "
[2086391.388558] end_request: I/O error, dev hdc, sector 8388008
[2086391.388561] Buffer I/O error on device hdc, logical block 2097002
[2086391.389073] hdc: command error: status=0x51 { DriveReady
SeekComplete Error }
[2086391.389073] hdc: command error: error=0x54 { AbortedCommand
LastFailedSense=0x05 }
[2086391.389073] ide: failed opcode was: unknown
[2086391.390386] ATAPI device hdc:
[2086391.390390] Error: Illegal request -- (Sense key=0x05)
[2086391.390395] Logical block address out of range -- (asc=0x21,
ascq=0x00)
[2086391.390399] The failed "Read 10" packet command was:
[2086391.390401] "28 00 00 1f ff 6b 00 00 01 00 00 00 00 00 00 00 "
[2086391.390419] end_request: I/O error, dev hdc, sector 8388012
[2086391.390424] Buffer I/O error on device hdc, logical block 2097003
[2086392.143657] usb 3-2: USB disconnect, address 8
[2086392.518975] usb 1-4: new high speed USB device using ehci_hcd and
address 21
[2086392.591457] UDF-fs: No VRS found
[2086392.647458] ISO 9660 Extensions: Microsoft Joliet Level 3
[2086392.668668] ISO 9660 Extensions: RRIP_1991A
[2086393.638891] usb 1-4: configuration #1 chosen from 1 choice
[2086393.647103] scsi14 : SCSI emulation for USB Mass Storage devices
[2086393.647103] usb-storage: device found at 21
[2086393.647103] usb-storage: waiting for device to settle before scanning
[2086393.647103] usb 1-4: New USB device found, idVendor=059b,
idProduct=0370
[2086393.647103] usb 1-4: New USB device strings: Mfr=2, Product=3,
SerialNumber=1
[2086393.647103] usb 1-4: Product: Iomega
[2086393.647103] usb 1-4: Manufacturer: Iomega
[2086393.647103] usb 1-4: SerialNumber: FAFFFFF0FDF1FFF1BF600914
[2086393.647103] usb 1-7: USB disconnect, address 20
[2086394.080157] usb 5-1: new low speed USB device using uhci_hcd and
address 3
[2086394.269215] usb 5-1: configuration #1 chosen from 1 choice
[2086394.288826] hiddev96hidraw0: USB HID v1.00 Device [ActionStar] on
usb-0000:00:1d.3-1
[2086394.289008] usb 5-1: New USB device found, idVendor=2101,
idProduct=0201
[2086394.289014] usb 5-1: New USB device strings: Mfr=1, Product=0,
SerialNumber=0
[2086394.289018] usb 5-1: Manufacturer: ActionStar
[2086399.152706] usb-storage: device scan complete
[2086399.159019] scsi 14:0:0:0: Direct-Access Iomega E xternal
HD 0000 PQ: 0 ANSI: 4
[2086399.161205] sd 14:0:0:0: [sda] 3907029168 512-byte hardware sectors
(2000399 MB)
[2086399.168788] sd 14:0:0:0: [sda] Write Protect is off
[2086399.168794] sd 14:0:0:0: [sda] Mode Sense: 38 00 00 00
[2086399.168799] sd 14:0:0:0: [sda] Assuming drive cache: write through
[2086399.169206] sd 14:0:0:0: [sda] 3907029168 512-byte hardware sectors
(2000399 MB)
[2086399.177206] sd 14:0:0:0: [sda] Write Protect is off
[2086399.177206] sd 14:0:0:0: [sda] Mode Sense: 38 00 00 00
[2086399.177206] sd 14:0:0:0: [sda] Assuming drive cache: write through
[2086399.177206] sda: sda1
[2086408.031027] sd 14:0:0:0: [sda] Attached SCSI disk
[2086573.874935] usb 5-1: USB disconnect, address 3
[2086919.200128] usb 1-4: USB disconnect, address 21
[2086919.980542] usb 3-2: new low speed USB device using uhci_hcd and
address 9
[2086920.164085] usb 3-2: configuration #1 chosen from 1 choice
[2086920.185027] hiddev96hidraw0: USB HID v1.00 Device [ActionStar] on
usb-0000:00:1d.1-2
[2086920.185027] usb 3-2: New USB device found, idVendor=2101,
idProduct=0201
[2086920.185027] usb 3-2: New USB device strings: Mfr=1, Product=0,
SerialNumber=0
[2086920.185027] usb 3-2: Manufacturer: ActionStar
[2086925.020903] usb 3-1: new low speed USB device using uhci_hcd and
address 10
[2086925.325865] usb 3-1: configuration #1 chosen from 1 choice
[2086925.358273] hiddev97hidraw1: USB HID v1.00 Device [ActionStar] on
usb-0000:00:1d.1-1
[2086925.358431] usb 3-1: New USB device found, idVendor=2101,
idProduct=0201
[2086925.358436] usb 3-1: New USB device strings: Mfr=1, Product=0,
SerialNumber=0
[2086925.358440] usb 3-1: Manufacturer: ActionStar
[2086931.537276] usb 3-1: USB disconnect, address 10
[2086931.991990] usb 1-3: new high speed USB device using ehci_hcd and
address 25
[2086932.174665] usb 1-3: configuration #1 chosen from 1 choice
[2086932.179412] scsi15 : SCSI emulation for USB Mass Storage devices
[2086932.183908] usb-storage: device found at 25
[2086932.183908] usb-storage: waiting for device to settle before scanning
[2086932.179412] usb 1-3: New USB device found, idVendor=059b,
idProduct=0370
[2086932.179412] usb 1-3: New USB device strings: Mfr=2, Product=3,
SerialNumber=1
[2086932.179412] usb 1-3: Product: Iomega
[2086932.179412] usb 1-3: Manufacturer: Iomega
[2086932.179412] usb 1-3: SerialNumber: FAFFFFF0FDF1FFF1BF600914
[2086937.761423] usb-storage: device scan complete
[2086937.764001] scsi 15:0:0:0: Direct-Access Iomega E xternal
HD 0000 PQ: 0 ANSI: 4
[2086937.765923] sd 15:0:0:0: [sda] 3907029168 512-byte hardware sectors
(2000399 MB)
[2086937.776220] sd 15:0:0:0: [sda] Write Protect is off
[2086937.776227] sd 15:0:0:0: [sda] Mode Sense: 38 00 00 00
[2086937.776231] sd 15:0:0:0: [sda] Assuming drive cache: write through
[2086937.777240] sd 15:0:0:0: [sda] 3907029168 512-byte hardware sectors
(2000399 MB)
[2086937.785241] sd 15:0:0:0: [sda] Write Protect is off
[2086937.785241] sd 15:0:0:0: [sda] Mode Sense: 38 00 00 00
[2086937.785241] sd 15:0:0:0: [sda] Assuming drive cache: write through
[2086937.785241] sda: sda1
[2086950.127620] sd 15:0:0:0: [sda] Attached SCSI disk
[2086979.104382] usb 3-2: USB disconnect, address 9
[2086979.248063] usb 1-3: USB disconnect, address 25
[2086979.807279] usb 1-4: new high speed USB device using ehci_hcd and
address 27
[2086980.390118] usb 1-4: configuration #1 chosen from 1 choice
[2086980.394125] scsi16 : SCSI emulation for USB Mass Storage devices
[2086980.396219] usb-storage: device found at 27
[2086980.396224] usb-storage: waiting for device to settle before scanning
[2086980.394187] usb 1-4: New USB device found, idVendor=059b,
idProduct=0370
[2086980.394187] usb 1-4: New USB device strings: Mfr=2, Product=3,
SerialNumber=1
[2086980.394187] usb 1-4: Product: Iomega
[2086980.394187] usb 1-4: Manufacturer: Iomega
[2086980.394187] usb 1-4: SerialNumber: FAFFFFF0FDF1FFF1BF600914
[2086980.634133] usb 3-1: new low speed USB device using uhci_hcd and
address 11
[2086980.822615] usb 3-1: configuration #1 chosen from 1 choice
[2086980.846765] hiddev96hidraw0: USB HID v1.00 Device [ActionStar] on
usb-0000:00:1d.1-1
[2086980.846872] usb 3-1: New USB device found, idVendor=2101,
idProduct=0201
[2086980.846872] usb 3-1: New USB device strings: Mfr=1, Product=0,
SerialNumber=0
[2086980.846872] usb 3-1: Manufacturer: ActionStar
[2086985.845133] usb-storage: device scan complete
[2086985.855737] scsi 16:0:0:0: Direct-Access Iomega E xternal
HD 0000 PQ: 0 ANSI: 4
[2086985.857633] sd 16:0:0:0: [sda] 3907029168 512-byte hardware sectors
(2000399 MB)
[2086985.865635] sd 16:0:0:0: [sda] Write Protect is off
[2086985.865635] sd 16:0:0:0: [sda] Mode Sense: 38 00 00 00
[2086985.865635] sd 16:0:0:0: [sda] Assuming drive cache: write through
[2086985.865635] sd 16:0:0:0: [sda] 3907029168 512-byte hardware sectors
(2000399 MB)
[2086985.873634] sd 16:0:0:0: [sda] Write Protect is off
[2086985.873634] sd 16:0:0:0: [sda] Mode Sense: 38 00 00 00
[2086985.873634] sd 16:0:0:0: [sda] Assuming drive cache: write through
[2086985.873634] sda: sda1
[2086994.995742] sd 16:0:0:0: [sda] Attached SCSI disk
[2087458.428531] usb 1-4: USB disconnect, address 27
[2087459.249935] usb 3-2: new low speed USB device using uhci_hcd and
address 12
[2087459.402392] usb 3-2: configuration #1 chosen from 1 choice
[2087459.442401] hiddev97hidraw1: USB HID v1.00 Device [ActionStar] on
usb-0000:00:1d.1-2
[2087459.442401] usb 3-2: New USB device found, idVendor=2101,
idProduct=0201
[2087459.442401] usb 3-2: New USB device strings: Mfr=1, Product=0,
SerialNumber=0
[2087459.442401] usb 3-2: Manufacturer: ActionStar
[2087487.809083] usb 3-1: USB disconnect, address 11
[2087488.384082] usb 1-3: new high speed USB device using ehci_hcd and
address 29
[2087488.542109] usb 1-3: configuration #1 chosen from 1 choice
[2087488.546977] scsi17 : SCSI emulation for USB Mass Storage devices
[2087488.552516] usb-storage: device found at 29
[2087488.552520] usb-storage: waiting for device to settle before scanning
[2087488.546977] usb 1-3: New USB device found, idVendor=059b,
idProduct=0370
[2087488.546977] usb 1-3: New USB device strings: Mfr=2, Product=3,
SerialNumber=1
[2087488.546977] usb 1-3: Product: Iomega
[2087488.546977] usb 1-3: Manufacturer: Iomega
[2087488.546977] usb 1-3: SerialNumber: FAFFFFF0FDF1FFF1BF600914
[2087493.994354] usb-storage: device scan complete
[2087494.054126] scsi 17:0:0:0: Direct-Access Iomega E xternal
HD 0000 PQ: 0 ANSI: 4
[2087494.054126] sd 17:0:0:0: [sda] 3907029168 512-byte hardware sectors
(2000399 MB)
[2087494.066622] sd 17:0:0:0: [sda] Write Protect is off
[2087494.066622] sd 17:0:0:0: [sda] Mode Sense: 38 00 00 00
[2087494.066622] sd 17:0:0:0: [sda] Assuming drive cache: write through
[2087494.066622] sd 17:0:0:0: [sda] 3907029168 512-byte hardware sectors
(2000399 MB)
[2087494.074621] sd 17:0:0:0: [sda] Write Protect is off
[2087494.074621] sd 17:0:0:0: [sda] Mode Sense: 38 00 00 00
[2087494.074621] sd 17:0:0:0: [sda] Assuming drive cache: write through
[2087494.074621] sda:<6>usb 1-3: USB disconnect, address 29
[2087505.361713] sd 17:0:0:0: [sda] Result: hostbyte=DID_ERROR
driverbyte=DRIVER_OK,SUGGEST_OK
[2087505.361713] end_request: I/O error, dev sda, sector 0
[2087505.361713] Buffer I/O error on device sda, logical block 0
[2087505.366489] sd 17:0:0:0: [sda] Result: hostbyte=DID_ERROR
driverbyte=DRIVER_OK,SUGGEST_OK
[2087505.366489] end_request: I/O error, dev sda, sector 0
[2087505.366489] Buffer I/O error on device sda, logical block 0
[2087505.361713] sd 17:0:0:0: [sda] Result: hostbyte=DID_ERROR
driverbyte=DRIVER_OK,SUGGEST_OK
[2087505.361713] end_request: I/O error, dev sda, sector 0
[2087505.361713] Buffer I/O error on device sda, logical block 0
[2087505.366489] sd 17:0:0:0: [sda] Result: hostbyte=DID_ERROR
driverbyte=DRIVER_OK,SUGGEST_OK
[2087505.366489] end_request: I/O error, dev sda, sector 0
[2087505.366489] Buffer I/O error on device sda, logical block 0
[2087505.361713] sd 17:0:0:0: [sda] Result: hostbyte=DID_ERROR
driverbyte=DRIVER_OK,SUGGEST_OK
[2087505.361713] end_request: I/O error, dev sda, sector 0
[2087505.361713] Buffer I/O error on device sda, logical block 0
[2087505.366489] ldm_validate_partition_table(): Disk read failed.
[2087505.366489] sd 17:0:0:0: [sda] Result: hostbyte=DID_ERROR
driverbyte=DRIVER_OK,SUGGEST_OK
[2087505.366489] end_request: I/O error, dev sda, sector 0
[2087505.366489] Buffer I/O error on device sda, logical block 0
[2087505.361713] sd 17:0:0:0: [sda] Result: hostbyte=DID_ERROR
driverbyte=DRIVER_OK,SUGGEST_OK
[2087505.361713] end_request: I/O error, dev sda, sector 0
[2087505.361713] Buffer I/O error on device sda, logical block 0
[2087505.366489] sd 17:0:0:0: [sda] Result: hostbyte=DID_ERROR
driverbyte=DRIVER_OK,SUGGEST_OK
[2087505.366489] end_request: I/O error, dev sda, sector 0
[2087505.366489] Buffer I/O error on device sda, logical block 0
[2087505.366489] sd 17:0:0:0: [sda] Result: hostbyte=DID_ERROR
driverbyte=DRIVER_OK,SUGGEST_OK
[2087505.366489] end_request: I/O error, dev sda, sector 0
[2087505.366489] Buffer I/O error on device sda, logical block 0
[2087505.366489] Dev sda: unable to read RDB block 0
[2087505.366493] sd 17:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK,SUGGEST_OK
[2087505.366493] end_request: I/O error, dev sda, sector 0
[2087505.366493] Buffer I/O error on device sda, logical block 0
[2087505.371728] sd 17:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK,SUGGEST_OK
[2087505.371737] end_request: I/O error, dev sda, sector 0
[2087505.371779] sd 17:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK,SUGGEST_OK
[2087505.371786] end_request: I/O error, dev sda, sector 24
[2087505.371816] sd 17:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK,SUGGEST_OK
[2087505.371822] end_request: I/O error, dev sda, sector 24
[2087505.371853] sd 17:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK,SUGGEST_OK
[2087505.371859] end_request: I/O error, dev sda, sector 0
[2087505.371873] unable to read partition table
[2087505.372007] sd 17:0:0:0: [sda] Attached SCSI disk
[2087506.080884] usb 1-4: new high speed USB device using ehci_hcd and
address 31
[2087516.219968] hub 1-0:1.0: unable to enumerate USB device on port 4
[2087516.680162] usb 1-4: new high speed USB device using ehci_hcd and
address 33
[2087516.959975] usb 1-4: configuration #1 chosen from 1 choice
[2087516.969705] scsi18 : SCSI emulation for USB Mass Storage devices
[2087516.969705] usb-storage: device found at 33
[2087516.969705] usb-storage: waiting for device to settle before scanning
[2087516.969705] usb 1-4: New USB device found, idVendor=059b,
idProduct=0370
[2087516.969705] usb 1-4: New USB device strings: Mfr=2, Product=3,
SerialNumber=1
[2087516.969705] usb 1-4: Product: Iomega
[2087516.969705] usb 1-4: Manufacturer: Iomega
[2087516.969705] usb 1-4: SerialNumber: FAFFFFF0FDF1FFF1BF600914
[2087517.206443] usb 3-1: new low speed USB device using uhci_hcd and
address 13
[2087517.458219] usb 3-1: configuration #1 chosen from 1 choice
[2087517.494884] hiddev96hidraw0: USB HID v1.00 Device [ActionStar] on
usb-0000:00:1d.1-1
[2087517.495046] usb 3-1: New USB device found, idVendor=2101,
idProduct=0201
[2087517.495052] usb 3-1: New USB device strings: Mfr=1, Product=0,
SerialNumber=0
[2087517.495056] usb 3-1: Manufacturer: ActionStar
[2087517.495075] usb 3-2: USB disconnect, address 12
[2087522.404216] usb-storage: device scan complete
[2087522.410881] scsi 18:0:0:0: Direct-Access Iomega E xternal
HD 0000 PQ: 0 ANSI: 4
[2087522.412715] sd 18:0:0:0: [sda] 3907029168 512-byte hardware sectors
(2000399 MB)
[2087522.425647] sd 18:0:0:0: [sda] Write Protect is off
[2087522.425654] sd 18:0:0:0: [sda] Mode Sense: 38 00 00 00
[2087522.425658] sd 18:0:0:0: [sda] Assuming drive cache: write through
[2087522.429148] sd 18:0:0:0: [sda] 3907029168 512-byte hardware sectors
(2000399 MB)
[2087522.433150] sd 18:0:0:0: [sda] Write Protect is off
[2087522.433150] sd 18:0:0:0: [sda] Mode Sense: 38 00 00 00
[2087522.433150] sd 18:0:0:0: [sda] Assuming drive cache: write through
[2087522.433150] sda: sda1
[2087522.455516] sd 18:0:0:0: [sda] Attached SCSI disk
[2087532.924202] usb 1-4: USB disconnect, address 33
[2087549.335561] usb 1-4: new high speed USB device using ehci_hcd and
address 34
[2087549.530574] usb 1-4: configuration #1 chosen from 1 choice
[2087549.535188] scsi19 : SCSI emulation for USB Mass Storage devices
[2087549.535188] usb-storage: device found at 34
[2087549.535188] usb-storage: waiting for device to settle before scanning
[2087549.537063] usb 1-4: New USB device found, idVendor=059b,
idProduct=0370
[2087549.537070] usb 1-4: New USB device strings: Mfr=2, Product=3,
SerialNumber=1
[2087549.537074] usb 1-4: Product: Iomega
[2087549.537078] usb 1-4: Manufacturer: Iomega
[2087549.537082] usb 1-4: SerialNumber: FAFFFFF0FDF1FFF1BF600914
[2087555.089780] usb-storage: device scan complete
[2087555.101745] scsi 19:0:0:0: Direct-Access Iomega E xternal
HD 0000 PQ: 0 ANSI: 4
[2087555.103645] sd 19:0:0:0: [sda] 3907029168 512-byte hardware sectors
(2000399 MB)
[2087555.119561] sd 19:0:0:0: [sda] Write Protect is off
[2087555.119567] sd 19:0:0:0: [sda] Mode Sense: 38 00 00 00
[2087555.119572] sd 19:0:0:0: [sda] Assuming drive cache: write through
[2087555.123538] sd 19:0:0:0: [sda] 3907029168 512-byte hardware sectors
(2000399 MB)
[2087555.127540] sd 19:0:0:0: [sda] Write Protect is off
[2087555.127540] sd 19:0:0:0: [sda] Mode Sense: 38 00 00 00
[2087555.127540] sd 19:0:0:0: [sda] Assuming drive cache: write through
[2087555.127540] sda: sda1
[2087555.139538] sd 19:0:0:0: [sda] Attached SCSI disk
[2087707.904196] usb 3-1: USB disconnect, address 13
[2087708.047726] usb 1-4: USB disconnect, address 34
[2087708.429721] usb 1-3: new high speed USB device using ehci_hcd and
address 35
[2087709.150919] hub 1-0:1.0: unable to enumerate USB device on port 3
[2087709.789691] usb 3-2: new low speed USB device using uhci_hcd and
address 14
[2087709.962517] usb 3-2: configuration #1 chosen from 1 choice
[2087709.984686] hiddev96hidraw0: USB HID v1.00 Device [ActionStar] on
usb-0000:00:1d.1-2
[2087709.984842] usb 3-2: New USB device found, idVendor=2101,
idProduct=0201
[2087709.984847] usb 3-2: New USB device strings: Mfr=1, Product=0,
SerialNumber=0
[2087709.984852] usb 3-2: Manufacturer: ActionStar
[2096771.799841] usb 3-2: USB disconnect, address 14
[2096802.760704] usb 1-3: new high speed USB device using ehci_hcd and
address 37
[2096802.920809] usb 1-3: configuration #1 chosen from 1 choice
[2096802.933310] scsi20 : SCSI emulation for USB Mass Storage devices
[2096802.933310] usb-storage: device found at 37
[2096802.933310] usb-storage: waiting for device to settle before scanning
[2096802.933310] usb 1-3: New USB device found, idVendor=059b,
idProduct=0370
[2096802.933310] usb 1-3: New USB device strings: Mfr=2, Product=3,
SerialNumber=1
[2096802.933310] usb 1-3: Product: Iomega
[2096802.933310] usb 1-3: Manufacturer: Iomega
[2096802.933310] usb 1-3: SerialNumber: FAFFFFF0FDF1FFF1BF600914
[2096808.255706] usb-storage: device scan complete
[2096808.261477] scsi 20:0:0:0: Direct-Access Iomega E xternal
HD 0000 PQ: 0 ANSI: 4
[2096808.263708] sd 20:0:0:0: [sda] 3907029168 512-byte hardware sectors
(2000399 MB)
[2096808.270702] sd 20:0:0:0: [sda] Write Protect is off
[2096808.270709] sd 20:0:0:0: [sda] Mode Sense: 38 00 00 00
[2096808.270713] sd 20:0:0:0: [sda] Assuming drive cache: write through
[2096808.271705] sd 20:0:0:0: [sda] 3907029168 512-byte hardware sectors
(2000399 MB)
[2096808.279070] sd 20:0:0:0: [sda] Write Protect is off
[2096808.279076] sd 20:0:0:0: [sda] Mode Sense: 38 00 00 00
[2096808.279080] sd 20:0:0:0: [sda] Assuming drive cache: write through
[2096808.279087] sda: sda1
[2096808.291704] sd 20:0:0:0: [sda] Attached SCSI disk
[2100280.986096] usb 1-3: USB disconnect, address 37
[2140718.275056] fuse init (API version 7.9)
[2144649.862907] cdrom: This disc doesn't have any tracks I recognize!
[2152219.197951] usb 1-3: new high speed USB device using ehci_hcd and
address 38
[2152219.345569] usb 1-3: configuration #1 chosen from 1 choice
[2152219.350436] scsi21 : SCSI emulation for USB Mass Storage devices
[2152219.356104] usb-storage: device found at 38
[2152219.356108] usb-storage: waiting for device to settle before scanning
[2152219.350436] usb 1-3: New USB device found, idVendor=059b,
idProduct=0370
[2152219.350436] usb 1-3: New USB device strings: Mfr=2, Product=3,
SerialNumber=1
[2152219.350436] usb 1-3: Product: Iomega
[2152219.350436] usb 1-3: Manufacturer: Iomega
[2152219.350436] usb 1-3: SerialNumber: FAFFFFF0FDF1FFF1BF600914
[2152224.457473] usb-storage: device scan complete
[2152224.464708] scsi 21:0:0:0: Direct-Access Iomega E xternal
HD 0000 PQ: 0 ANSI: 4
[2152224.465662] sd 21:0:0:0: [sda] 3907029168 512-byte hardware sectors
(2000399 MB)
[2152224.478635] sd 21:0:0:0: [sda] Write Protect is off
[2152224.478642] sd 21:0:0:0: [sda] Mode Sense: 38 00 00 00
[2152224.478646] sd 21:0:0:0: [sda] Assuming drive cache: write through
[2152224.482249] sd 21:0:0:0: [sda] 3907029168 512-byte hardware sectors
(2000399 MB)
[2152224.486251] sd 21:0:0:0: [sda] Write Protect is off
[2152224.486251] sd 21:0:0:0: [sda] Mode Sense: 38 00 00 00
[2152224.486251] sd 21:0:0:0: [sda] Assuming drive cache: write through
[2152224.486251] sda: sda1
[2152224.498249] sd 21:0:0:0: [sda] Attached SCSI disk
ve3sjv@tux-net:~$
Reply to: