[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: 2 Ethernet cabling question



On Saturday 25 December 2010 08:42:52 S Mathias wrote:
> Two questions that was not always clear for me [sorry for posting to this
> list :\]:
> 
> ###########################################################################
> ###################
> 
> Q1) when cabling, is the color order important? like:
> 
> straight cabling:
> A side: white-orange, orange, white-green, blue, white-blue, green,
> white-brown, brown B side: white-orange, orange, white-green, blue,
> white-blue, green, white-brown, brown
> 
> could be eg.: like this??
> A side: white-orange, brown, white-blue, green, white-green, blue,
> white-brown, orange B side: white-orange, brown, white-blue, green,
> white-green, blue, white-brown, orange

Depends.  Firstly, non-standard order might confuse the heck out of other 
techs.  More important, if you are just installing the tips and the majority 
of the cable is pre-made, they might be using a twisting/braiding order that 
minimizes noise where using the standard cable ordering.  Naively, there's no 
problem; and using a non-standard order should work, but using the standard 
order is well-advised.

If you are twisting/braiding your own cable, the best ordering is based how 
you twist/braid the wires.

> ###########################################################################
> ###################
> 
> Q2) again cabling.. i know what is the color order of straight and
> crossover cabling. BUT: what are the color orders, when i need to create
> physically two separated networks?

I don't recommend combining more than the 8 wires in a single cable when doing 
ethernet.  Just run multiple cables and bind them together.

Cross-talk between cables is less of an issue than cross-talk between wires in 
a single cable.  However, you are correct that would be minimized by running 
all the wires in a single cable, IF you use the correct braiding/twisting 
order through the length of the cable.  I know the generic algorithm for 
braiding N straight wires in a round cable involves primitive roots of the 
modular ring N, but I don't know how to practically apply that to braiding my 
own cable.
-- 
Boyd Stephen Smith Jr.           	 ,= ,-_-. =.
bss@iguanasuicide.net            	((_/)o o(\_))
ICQ: 514984 YM/AIM: DaTwinkDaddy 	 `-'(. .)`-'
http://iguanasuicide.net/        	     \_/

Attachment: signature.asc
Description: This is a digitally signed message part.


Reply to: