2010/10/16 Rodolfo Medina
<rodolfo.medina@gmail.com>
The ethernet port of my Hyundai laptop, that used to work fine, seems to be
dead. At boot, I get the following message:
Setting up networking....
Configuring network interfaces...SIOCSIFADDR: No such device
eth1: ERROR while getting interface flags: No such device
SIOCSIFNETMASK: No such device
eth1: ERROR while getting interface flags: No such device
Failed to bring up eth1.
Do you think it's a hardware problem?
The file /etc/udev/rules.d/z25_persistent-net.rules is the following:
# Firewire device 00030d53255c8616 (ohci1394)
SUBSYSTEM=="net", DRIVERS=="?*", ATTRS{address}=="00:03:0d:53:25:5c:86:16", NAME="eth0"
# PCI device 0x1039:0x0900 (sis900)
SUBSYSTEM=="net", DRIVERS=="?*", ATTRS{address}=="00:03:0d:33:02:17", NAME="eth1
The command `ifconfig -a' gives the following output:
# ifconfig -a
eth0 Link encap:UNSPEC HWaddr 00-03-0D-53-25-5C-86-16-00-00-00-00-00-00-00-00
inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
lo Link encap:Local Loopback
LOOPBACK MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
[...]
, whereas it used to have also eth1:
eth1 Link encap:Ethernet HWaddr 00:03:0D:33:02:17
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:201 Base address:0xd800
/etc/network/interfaces is the following:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
auto eth1
allow-hotplug eth1
iface eth1 inet static
address 192.168.0.1
netmask 255.255.255.0
Please help with this issue, I need to know if the machine hardware needs to be
repaired or it is only a configuration problem.
Thanks
Rodolfo
--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: [🔎] 87lj5yh2ad.fsf@gmail.com" target="_blank">http://lists.debian.org/[🔎] 87lj5yh2ad.fsf@gmail.com