Re: lilo config is busted, need help fixing it
On Thu, 23 Sep 2010 23:20:45 -0500
Stan Hoeppner <stan@hardwarefreak.com> wrote:
> briand@aracnet.com put forth on 9/23/2010 10:50 PM:
>
> > Boot image: /boot/vmlinuz-2.6.32-5-amd64
> > Device 0x0802: BIOS drive 0x80, 255 heads, 30515 cylinders,
> > 63 sectors. Partition offset: 120583890 sectors.
> > Using Volume ID 5879D4A8 on bios 80
> > Setup length is 27 sectors.
> > Mapped 4708 sectors.
> > Mapping RAM disk /boot/initrd.img-2.6.32-5-amd64
> > Device 0x0802: BIOS drive 0x80, 255 heads, 30515 cylinders,
> > 63 sectors. Partition offset: 120583890 sectors.
> > Using Volume ID 5879D4A8 on bios 80
> > RAM disk: 9407 sectors.
> > Added Lin_2.6.32img5
> > <dev=0xe0,hd=227,cyl=57,sct=204>
> > "ro root=802"
> >
> > I immediately noticed that dev=0xe0
>
> > shouldn't dev=0x82 !!??
>
> No, that's normal. What had you changed on the system immediately
> prior to this boot problem occurring?
apt-get dist-upgrade, natch.
it's very odd, because it runs just fine. and it boots fine as long as
I supply the root=/dev/sda2
aaargh. I've never had so much trouble in my entire
linux/debian/life. I have had a smooth boot or bootloader upgrade on
this computer since I fired it up. other one works good, though. but
really, 1/2 _is_ bad.
Brian
Reply to: