|
Recently I have installed smartmontools. I have run the following command to determine the disk : # fdisk -l I have run the following command and it is showing the following error for all the disks [ hda, hda1, hda2, hda5 ] : # smartctl -l selftest /dev/hda === START OF READ SMART DATA SECTION === SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15730 - # 2 Extended offline Aborted by host 90% 11081 - # 3 Short offline Completed without error 00% 11080 - And when I run the following command nothing happens and I did check syslog for message. Do I have to look elsewhere ? # smartctl -t short /dev/hda and the output of the command : smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Sending command: "Execute SMART Short self-test routine immediately in off-line mode". Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful. Testing has begun. Please wait 2 minutes for test to complete. Test will complete after Tue Aug 17 21:29:15 2010 Use smartctl -X to abort test. vishnuvardhan:/home/vishnu# The output of my hard drive # smartctl -a /dev/hda : smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Hitachi Travelstar 5K100 series Device Model: HTS541040G9AT00 Serial Number: MPB2LAX2ESGPDM Firmware Version: MB2IA60A User Capacity: 40,007,761,920 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 3a Local Time is: Mon Aug 9 13:20:16 2010 IST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 645) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 29) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0 2 Throughput_Performance 0x0005 105 105 040 Pre-fail Offline - 4573 3 Spin_Up_Time 0x0007 253 253 033 Pre-fail Always - 1 4 Start_Stop_Count 0x0012 093 093 000 Old_age Always - 11195 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 122 122 040 Pre-fail Offline - 39 9 Power_On_Hours 0x0012 065 065 000 Old_age Always - 15650 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 6195 191 G-Sense_Error_Rate 0x000a 099 099 000 Old_age Always - 3 192 Power-Off_Retract_Count 0x0032 097 097 000 Old_age Always - 247202527 193 Load_Cycle_Count 0x0012 089 089 000 Old_age Always - 114999 194 Temperature_Celsius 0x0002 157 157 000 Old_age Always - 35 (Lifetime Min/Max 17/50) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 132 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 191 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 191 occurred at disk power-on lifetime: 10995 hours (458 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 01 59 bf 7f e0 Error: UNC at LBA = 0x007fbf59 = 8372057 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 00 01 59 bf 7f e0 00 00:09:22.600 READ VERIFY SECTOR(S) c8 00 01 d0 98 86 e1 00 00:09:22.600 READ DMA 40 00 02 59 bf 7f e0 00 00:09:18.500 READ VERIFY SECTOR(S) c8 00 01 70 7b e6 e0 00 00:09:18.500 READ DMA 40 00 02 57 bf 7f e0 00 00:09:18.500 READ VERIFY SECTOR(S) Error 190 occurred at disk power-on lifetime: 10995 hours (458 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 02 59 bf 7f e0 Error: UNC at LBA = 0x007fbf59 = 8372057 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 00 02 59 bf 7f e0 00 00:09:18.500 READ VERIFY SECTOR(S) c8 00 01 70 7b e6 e0 00 00:09:18.500 READ DMA 40 00 02 57 bf 7f e0 00 00:09:18.500 READ VERIFY SECTOR(S) c8 00 01 00 00 00 e0 00 00:09:18.500 READ DMA 40 00 04 5b bf 7f e0 00 00:09:18.500 READ VERIFY SECTOR(S) Error 189 occurred at disk power-on lifetime: 10995 hours (458 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 02 59 bf 7f e0 Error: UNC at LBA = 0x007fbf59 = 8372057 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 00 04 57 bf 7f e0 00 00:09:14.300 READ VERIFY SECTOR(S) c8 00 01 00 00 00 e0 00 00:09:14.300 READ DMA 40 00 08 57 bf 7f e0 00 00:09:10.200 READ VERIFY SECTOR(S) c8 00 01 d0 98 86 e1 00 00:09:10.200 READ DMA 40 00 08 4f bf 7f e0 00 00:09:10.200 READ VERIFY SECTOR(S) Error 188 occurred at disk power-on lifetime: 10995 hours (458 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 06 59 bf 7f e0 Error: UNC at LBA = 0x007fbf59 = 8372057 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 00 08 57 bf 7f e0 00 00:09:10.200 READ VERIFY SECTOR(S) c8 00 01 d0 98 86 e1 00 00:09:10.200 READ DMA 40 00 08 4f bf 7f e0 00 00:09:10.200 READ VERIFY SECTOR(S) c8 00 01 70 7b e6 e0 00 00:09:10.200 READ DMA 40 00 10 4f bf 7f e0 00 00:09:06.000 READ VERIFY SECTOR(S) Error 187 occurred at disk power-on lifetime: 10995 hours (458 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 06 59 bf 7f e0 Error: UNC at LBA = 0x007fbf59 = 8372057 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 00 10 4f bf 7f e0 00 00:09:06.000 READ VERIFY SECTOR(S) c8 00 01 00 00 00 e0 00 00:09:06.000 READ DMA 40 00 10 3f bf 7f e0 00 00:09:06.000 READ VERIFY SECTOR(S) c8 00 01 00 00 00 e0 00 00:09:06.000 READ DMA 40 00 20 5f bf 7f e0 00 00:09:06.000 READ VERIFY SECTOR(S) SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Aborted by host 90% 11081 - # 2 Short offline Completed without error 00% 11080 - Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Can somebody please guide me how to proceed or the above errors are normal ? thanks for your time, vishnuvardhan. |