Re: wicd with WPA2 fails

[Paul Scott <waterhorse@ultrasw.com>]

On Thu, Jul 15, 2010 at 08:43:06AM +0200, Thierry Chatelet wrote:
> On Thursday 15 July 2010 03:39:56 Paul Scott wrote:
> > sid fully updated
> > 
> > wicd connects fine if I turn wireless security on the WRT54G2 router
> > off.  When I set the router to WPA2 - AES I get (from wicd.log)
> > 
> > 2010/07/14 17:40:41 :: iwconfig eth2
> > 2010/07/14 17:40:41 :: WPA_CLI RESULT IS SCANNING
> > 2010/07/14 17:40:42 :: wpa_supplicant authentication may have failed.
> > 2010/07/14 17:40:42 :: connect result is Failed
> > 2010/07/14 17:40:42 :: exiting connection thread
> > 2010/07/14 17:40:43 :: Sending connection attempt result bad_pass
> > 2010/07/14 17:40:43 :: ifconfig eth0
> > 2010/07/14 17:40:43 :: ifconfig eth2
> > 2010/07/14 17:40:43 :: Forced disconnect on
> > 2010/07/14 17:40:43 :: attempting to set hostname with dhclient
> > 2010/07/14 17:40:43 :: using dhcpcd or another supported client may work
> > better
> > 
> > 
> > TIA for any help,
> > 
> > Paul Scott
> 
> Try removing network-manager

network-manager is not installed.

Paul