>> Left Editor
>> Starting Capture
>> AV/C Aktiverad
>>> Using iec61883 capture
rom1394_0 warning: read failed: 0x0000fffff0000414
>>> iec61883Reader::StartThread on port 0
>>> AVC enabled
>> Constructing File Capture tracker
send oops
send oops
send oops
>>> AVC status error
send oops
send oops
send oops
>>> AVC status error
send oops
send oops
send oops
>>> AVC status error
rom1394_1 warning: read failed: 0x0000fffff0000414
rom1394_0 warning: read failed: 0x0000fffff0000414
send oops
send oops
send oops
>>> AVC status error
send oops
send oops
send oops
>>> AVC status error
send oops
send oops
send oops
>>> AVC status error
rom1394_1 warning: read failed: 0x0000fffff0000414
rom1394_0 warning: read failed: 0x0000fffff0000414
send oops
send oops
send oops
>>> AVC status error
send oops
send oops
send oops
>>> AVC status error
send oops
send oops
send oops
>>> AVC status error
rom1394_1 warning: read failed: 0x0000fffff0000414
rom1394_0 warning: read failed: 0x0000fffff0000414
rom1394_1 warning: read failed: 0x0000fffff0000418
rom1394_1 warning: read failed: 0x0000fffff000041c
rom1394_1 warning: read failed: 0x0000fffff0000420
rom1394_1 warning: read failed: 0x0000fffff0000424
rom1394_1 warning: read failed: 0x0000fffff0000428
rom1394_1 warning: read failed: 0x0000fffff000042c
rom1394_0 warning: read failed: 0x0000fffff0000414
>>> AVC enabled
send oops
send oops
send oops
>>> AVC status error
send oops
send oops
send oops
>>> AVC status error
send oops
send oops
send oops
>>> AVC status error
>> Kino Common newFile
>> Leaving Capture
>> Starting Editor
>>> Received playlist to store at position 0
>>>> Adding to end
Exiting Kino
And as you may be able to tell it's not working...
Using dvgrab I get the following output:
$ dvgrab sss
rom1394_0 warning: read failed: 0x0000fffff0000414
error reading config rom directory for node 0
Found AV/C device with GUID 0x080046010448b611
Waiting for DV... <<-------Here it starts playback on the camera but then it just sits there until I ^C...
^C"" 0.00 MiB 0 frames
Capture Stopped
Error: no DV
All my googling seems to tell me that this shouldn't occur with a recent kernel,kino,dvgrab and libraw1394-11.
Any help or ideas would be much appriciated!
--
//Erik Sundin