problems using wicd on WPA2 secured networks
Hi,
Wicd is mostly not working for me on networks using WPA2 including a
Linksys WRT54G2 router I configured myself for WPA2. Testing this
connection when encryption is disabled works fine. When I set the
router to WPA2 Personal I currently get:
Connection failed: bad password
2010/01/19 01:44:32 :: Connecting to wireless network bliss
2010/01/19 01:44:32 :: iwconfig eth1
2010/01/19 01:44:32 :: /sbin/dhcpcd-bin -k eth1
2010/01/19 01:44:32 :: ifconfig eth1 0.0.0.0
2010/01/19 01:44:32 :: /sbin/ip route flush dev eth1
2010/01/19 01:44:32 :: ifconfig eth1 down
2010/01/19 01:44:32 :: ifconfig eth1 up
2010/01/19 01:44:32 :: wpa_cli -i eth1 terminate
2010/01/19 01:44:33 :: /sbin/dhcpcd-bin -k eth0
2010/01/19 01:44:33 :: ifconfig eth0 0.0.0.0
2010/01/19 01:44:33 :: /sbin/ip route flush dev eth0
2010/01/19 01:44:33 :: ifconfig eth0 down
2010/01/19 01:44:33 :: ifconfig eth0 up
2010/01/19 01:44:33 :: Putting interface down
2010/01/19 01:44:33 :: ifconfig eth1 down
2010/01/19 01:44:33 :: Releasing DHCP leases...
2010/01/19 01:44:33 :: /sbin/dhcpcd-bin -k eth1
2010/01/19 01:44:33 :: Setting false IP...
2010/01/19 01:44:33 :: ifconfig eth1 0.0.0.0
2010/01/19 01:44:33 :: Stopping wpa_supplicant
2010/01/19 01:44:33 :: wpa_cli -i eth1 terminate
2010/01/19 01:44:34 :: Flushing the routing table...
2010/01/19 01:44:34 :: /sbin/ip route flush dev eth1
2010/01/19 01:44:34 :: iwconfig eth1 mode managed
2010/01/19 01:44:34 :: Putting interface up...
2010/01/19 01:44:34 :: ifconfig eth1 up
2010/01/19 01:44:34 :: iwconfig eth1
2010/01/19 01:44:36 :: enctype is wpa
2010/01/19 01:44:36 :: Generating psk...
2010/01/19 01:44:36 :: ['/usr/bin/wpa_passphrase', 'bliss', '********']
2010/01/19 01:44:36 :: Attempting to authenticate...
2010/01/19 01:44:37 :: ['wpa_supplicant', '-B', '-i', 'eth1', '-c',
'/var/lib/wicd/configurations/0023690f97d7', '-D', 'wext']
2010/01/19 01:44:37 :: ['iwconfig', 'eth1', 'essid', 'bliss']
2010/01/19 01:44:37 :: iwconfig eth1 channel 11
2010/01/19 01:44:37 :: iwconfig eth1 ap 00:23:69:0F:97:D7
2010/01/19 01:44:37 :: WPA_CLI RESULT IS ASSOCIATING
...
2010/01/19 01:45:13 :: wpa_supplicant authentication may have failed.
2010/01/19 01:45:13 :: connect result is Failed
2010/01/19 01:45:13 :: exiting connection thread
2010/01/19 01:45:13 :: Sending connection attempt result bad_pass
2010/01/19 01:45:13 :: ifconfig eth0
2010/01/19 01:45:13 :: ifconfig eth1
2010/01/19 01:45:13 :: Forced disconnect on
2010/01/19 01:45:13 :: iwconfig eth1
2010/01/19 01:45:13 :: /sbin/dhcpcd-bin -k eth1
2010/01/19 01:45:13 :: ifconfig eth1 0.0.0.0
2010/01/19 01:45:14 :: /sbin/ip route flush dev eth1
2010/01/19 01:45:14 :: ifconfig eth1 down
2010/01/19 01:45:14 :: ifconfig eth1 up
2010/01/19 01:45:14 :: wpa_cli -i eth1 terminate
2010/01/19 01:45:14 :: /sbin/dhcpcd-bin -k eth0
2010/01/19 01:45:14 :: ifconfig eth0 0.0.0.0
2010/01/19 01:45:14 :: /sbin/ip route flush dev eth0
TIA for any ideas,
Paul Scott
Reply to: