[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

zero report from ifconfig; was Re(3): freezing Ethernet crossover link.



Folk,

Date: Sat, 12 Dec 2009 20:46:38 -0800 I wrote,
> ... Cantor can use the other 200M and cable.

Yes, the other Linksys USB200M Ethernet adapter 
and cable exhibit the same behaviour.  ifconfig 
always reports 0 bytes transported.  There 
has been one communication freeze as described 
previously for eth0.  So it must be a software 
failure.

Does anyone have Squeeze and a 200M USB-Ethernet 
adapter?  If so, please please try ifconfig and 
let us know whether you get a zero report.

Does anyone have Squeeze and any USB-Ethernet 
adapter in use?

Unless someone has an insight, I'll file a bug 
report.  It should be against the kernel, correct?

The current result from ifconfig follows.

Regards,       ... Peter E.

dalton:/home/peter# ping cantor
PING cantor.invalid (172.24.1.2) 56(84) bytes of data.
64 bytes from cantor.invalid (172.24.1.2): icmp_seq=1 ttl=32 time=3.91 ms
64 bytes from cantor.invalid (172.24.1.2): icmp_seq=2 ttl=32 time=2.45 ms
64 bytes from cantor.invalid (172.24.1.2): icmp_seq=3 ttl=32 time=3.36 ms
64 bytes from cantor.invalid (172.24.1.2): icmp_seq=4 ttl=32 time=4.48 ms
^C
--- cantor.invalid ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3004ms
rtt min/avg/max/mdev = 2.451/3.552/4.482/0.749 ms
dalton:/home/peter# ifconfig eth3
eth3      Link encap:Ethernet  HWaddr 00:1d:7e:00:ff:98
          inet addr:172.24.1.1  Bcast:172.24.1.255  Mask:255.255.255.0
          inet6 addr: fe80::21d:7eff:fe00:ff98/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)





-- 
Google "pathology workshop"


Reply to: